Re: [PATCH v3 04/11] otg-fsm: move usb_bus_start_enum into otg-fsm->ops

[Peter Chen <peter.chen@freescale.com>]

On Wed, Jul 15, 2015 at 04:30:27PM +0300, Roger Quadros wrote:
> On 14/07/15 03:34, Peter Chen wrote:
> > On Mon, Jul 13, 2015 at 01:13:54PM +0300, Roger Quadros wrote:
> >> Peter,
> >>
> >> On 13/07/15 04:58, Peter Chen wrote:
> >>> On Wed, Jul 08, 2015 at 01:19:30PM +0300, Roger Quadros wrote:
> >>>> This is to prevent missing symbol build error if OTG is
> >>>> enabled (built-in) and HCD core (CONFIG_USB) is module.
> >>>>
> >>>
> >>> We may let the OTG-DRD/OTG-FSM depends on CONFIG_USB to fix it.
> >>
> >> CONFIG_OTG already depends on CONFIG_USB as it is a sub-option of
> >> CONFIG_USB. It doesn't depend on CONFIG_USB_GADGET and that can
> >> be fixed.
> >>
> >> But dependency is not the problem here. Symbols not available to
> >> OTG driver when USB/GADGET is 'm' is the problem.
> >>
> >> e.g.
> >> CONFIG_USB_OTG is always built-in.
> >> we need to work if CONFIG_USB is 'm'/'y'
> >> _and_ if CONFIG_USB_GADGET is 'm'/'y'
> >>
> > 
> > below should fix this issue, but we may need to make some
> > changes for code which are defined by CONFIG_USB_OTG.
> > 
> > diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> > index a99c89e..5e374ad 100644
> > --- a/drivers/usb/core/Kconfig
> > +++ b/drivers/usb/core/Kconfig
> > @@ -42,8 +42,9 @@ config USB_DYNAMIC_MINORS
> >           If you are unsure about this, say N here.
> > 
> > config USB_OTG
> > -       bool "OTG support"
> > +       tristate "OTG support"
> > 	depends on PM
> > +       depends on USB && USB_GADGET
> > 	default n
> >    help
> >      The most notable feature of
> >      USB OTG is support for a
> 
> With this USB_OTG will become 'm' when either USB or USB_GADGET is m
> and will break if either USB or USB_GADGET is made y as all OTG core
> API symbols won't be available. :)
> 

Ok, after thinking more, seems we can't handle properly if USB_OTG as
'm', your idea that using host/gadget/fsm->ops to call hcd/gadget API
and the controller driver will defines these ops (due to it will use
hcd/gadget function) is proper way currently.

-- 

Best Regards,
Peter Chen