Re: linux 4.2-rc1 broken Nokia N900

[Pavel Machek <pavel@ucw.cz>]

On Mon 2015-07-20 15:46:47, Michael Welling wrote:
> On Tue, Jul 14, 2015 at 09:14:12AM +0200, Pali Rohár wrote:
> > On Monday 13 July 2015 17:36:07 Michael Welling wrote:
> > > On Tue, Jul 14, 2015 at 12:02:44AM +0200, Pali Rohár wrote:
> > > > I think nothing special. I just call:
> > > > 
> > > > export ARCH=arm
> > > > export CROSS_COMPILE=arm-linux-gnueabi-
> > > > make rx51_defconfig
> > > > rm -f arch/arm/boot/zImage
> > > > make -j12 zImage modules omap3-n900.dtb CONFIG_DEBUG_SECTION_MISMATCH=y
> > > > cat arch/arm/boot/zImage arch/arm/boot/dts/omap3-n900.dtb > arch/arm/boot/zImage.new
> > > > mv arch/arm/boot/zImage.new arch/arm/boot/zImage
> > > >
> > > 
> > > Where are you getting rx51_defconfig from?
> > > 
> > > This does not appear to be in the kernel source any longer.
> > > 
> > > Can you try the above with omap2plus_defconfig?
> > >  
> > 
> > It is in my linux-n900 repository: https://github.com/pali/linux-n900
> > Repository contains more n900 specific patches but SPI code is unpatched
> > 
> > https://github.com/pali/linux-n900/blob/HEAD/arch/arm/configs/rx51_defconfig
> > 
> > Later in week I can try to compile also with omap2plus_defconfig...
> > But in my opinion kernel should not crash with different configuration.
> 
> Has any progress been made on this?
> 
> Seeing as I was dropped into the middle of this thread,
> I took a look at the discussion previous.
> 
> It appears that you are building the drivers as modules.
> Perhaps I can again attempt to duplicate the issue using modules.
> Though this should not make a difference.

Actually.. for the record I'm _not_ using modules. So either I hit
something different, or problem happens regardless of modules.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html