From: Michael Welling <mwelling@ieee.org>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Pali Rohár" <pali.rohar@gmail.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Ivaylo Dimitrov" <ivo.g.dimitrov.75@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Nishanth Menon" <nm@ti.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: linux 4.2-rc1 broken Nokia N900
Date: Tue, 21 Jul 2015 16:28:52 -0500 [thread overview]
Message-ID: <20150721212852.GA29640@deathstar> (raw)
In-Reply-To: <20150721093441.GA23241@amd>
On Tue, Jul 21, 2015 at 11:34:41AM +0200, Pavel Machek wrote:
> Actually.. for the record I'm _not_ using modules. So either I hit
> something different, or problem happens regardless of modules.
> Pavel
I was able to reproduce the error by using my Beagleboard.
I added a registration for the tsc2005 and built the driver as a module.
[ 4.318878] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa09802c
[ 4.326934] pgd = cf114000
[ 4.329742] [fa09802c] *pgd=48011452(bad)
[ 4.333953] Internal error: : 1028 [#1] PREEMPT ARM
[ 4.339050] Modules linked in: tsc2005(+) twl4030_wdt(+) rtc_twl(+) omap_ssi hsi
[ 4.346832] CPU: 0 PID: 74 Comm: udevd Not tainted 4.2.0-rc3+ #2
[ 4.353118] Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[ 4.359680] task: cf0a8f00 ti: cf112000 task.ti: cf112000
[ 4.365356] PC is at omap2_mcspi_set_cs+0x3c/0x44
[ 4.370269] LR is at spi_setup+0xd4/0x10c
[ 4.374450] pc : [<c0328b5c>] lr : [<c0326a6c>] psr: 200f0113
[ 4.374450] sp : cf113d48 ip : 00000001 fp : 00000fff
[ 4.386474] r10: cf31ffe4 r9 : 00000000 r8 : 00000008
[ 4.391937] r7 : 00000fff r6 : 00000000 r5 : 00000000 r4 : cfbdbe00
[ 4.398773] r3 : 200103dc r2 : fa098000 r1 : 00000001 r0 : cfbdbe00
[ 4.405578] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 4.413055] Control: 10c5387d Table: 8f114019 DAC: 00000015
[ 4.419067] Process udevd (pid: 74, stack limit = 0xcf112210)
[ 4.425079] Stack: (0xcf113d48 to 0xcf114000)
[ 4.429626] 3d40: cfbdbe00 cfbdbe00 cfce7ab8 bf017ac8 cfbdd5a0 c015dc08
[ 4.438201] 3d60: cf352190 00000000 00000fff 00000004 00000008 00000002 00000118 00001f40
[ 4.446746] 3d80: 00000001 bf0183cc cfbdbe00 00000000 bf0183dc 00000008 00000001 cf31ffe4
[ 4.455322] 3da0: cf31ffc8 c0326458 c0326408 cfbdbe00 c073e81c c02e7ca0 cfbdbe00 cfbdbe34
[ 4.463867] 3dc0: bf0183dc c06e8254 c06aefe0 c02e7e6c 00000000 bf0183dc c02e7e04 c02e6530
[ 4.472442] 3de0: cf964c4c cfbd89b0 bf0183dc 00000000 cf322200 c02e74e8 bf01830f bf018310
[ 4.480987] 3e00: 00000000 bf0183dc bf01a000 00000000 c06aefe0 c02e8904 00000000 cf353080
[ 4.489562] 3e20: bf01a000 c0009640 cf978000 00000001 00000000 00000000 00000001 00000000
[ 4.498107] 3e40: cf07c008 00150013 cf07c000 600f0113 c06db824 c06db824 cfedf9c0 0040003f
[ 4.506683] 3e60: cfedf9c0 00150013 cfcf9000 00080000 cf801f00 000000d0 bf018440 bf018440
[ 4.515228] 3e80: 00000001 cf353040 bf018488 cf31ffc0 00000001 c046c4b8 bf018440 c06ffb90
[ 4.523803] 3ea0: cf113f58 00000001 bf018440 c00875b0 bf01844c 00007fff 00000000 c0084f8c
[ 4.532348] 3ec0: c0084b28 bf018614 bf018640 00000000 00026d29 d09c503c b6f0aec0 c0084c60
[ 4.540924] 3ee0: d09a8000 00026d29 000003e9 00000000 0b300002 00000000 00000000 00000000
[ 4.549468] 3f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.558044] 3f20: 00000000 00000000 00000000 00000000 00000138 00000000 b6f0aec0 00000005
[ 4.566589] 3f40: 0000017b c000ebc4 cf112000 00000000 bef58e70 c0087bec d09a8000 00026d29
[ 4.575134] 3f60: d09c4934 d09c4764 d09ce71c 00001640 000019e0 00000000 00000000 00000000
[ 4.583709] 3f80: 0000002d 0000002e 00000017 00000014 00000012 00000000 00000000 0004a898
[ 4.592254] 3fa0: 00000000 c000ea40 00000000 0004a898 00000005 b6f0aec0 00000000 00020000
[ 4.600830] 3fc0: 00000000 0004a898 00000000 0000017b 00000000 0004a898 0004aa30 bef58e70
[ 4.609374] 3fe0: bef58d98 bef58d88 b6f0399c b6e93ed0 60070010 00000005 00000000 00000000
[ 4.617950] [<c0328b5c>] (omap2_mcspi_set_cs) from [<c0326a6c>] (spi_setup+0xd4/0x10c)
[ 4.626281] [<c0326a6c>] (spi_setup) from [<bf017ac8>] (tsc2005_probe+0x108/0x5d4 [tsc2005])
[ 4.635131] [<bf017ac8>] (tsc2005_probe [tsc2005]) from [<c0326458>] (spi_drv_probe+0x50/0x6c)
[ 4.644165] [<c0326458>] (spi_drv_probe) from [<c02e7ca0>] (driver_probe_device+0xf4/0x258)
[ 4.652893] [<c02e7ca0>] (driver_probe_device) from [<c02e7e6c>] (__driver_attach+0x68/0x8c)
[ 4.661743] [<c02e7e6c>] (__driver_attach) from [<c02e6530>] (bus_for_each_dev+0x6c/0x90)
[ 4.670318] [<c02e6530>] (bus_for_each_dev) from [<c02e74e8>] (bus_add_driver+0xcc/0x1e4)
[ 4.678863] [<c02e74e8>] (bus_add_driver) from [<c02e8904>] (driver_register+0x9c/0xe0)
[ 4.687255] [<c02e8904>] (driver_register) from [<c0009640>] (do_one_initcall+0x100/0x1b0)
[ 4.695922] [<c0009640>] (do_one_initcall) from [<c046c4b8>] (do_init_module+0x58/0x1c0)
[ 4.704406] [<c046c4b8>] (do_init_module) from [<c00875b0>] (load_module+0x16ac/0x1b64)
[ 4.712799] [<c00875b0>] (load_module) from [<c0087bec>] (SyS_finit_module+0x60/0x68)
[ 4.721008] [<c0087bec>] (SyS_finit_module) from [<c000ea40>] (ret_fast_syscall+0x0/0x3c)
[ 4.729553] Code: e5823018 e5902188 e5922000 e582302c (e592302c)
[ 4.735961] ---[ end trace 375298308353557f ]---
Now to figure out why this is happening.
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2015-07-21 21:28 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 12:05 linux 4.2-rc1 broken Nokia N900 Pali Rohár
2015-07-13 6:44 ` Tony Lindgren
2015-07-13 8:09 ` Sebastian Reichel
2015-07-13 17:03 ` Michael Welling
2015-07-13 17:09 ` Pali Rohár
2015-07-13 17:56 ` Michael Welling
2015-07-13 20:28 ` Michael Welling
2015-07-13 20:34 ` Pali Rohár
2015-07-13 21:52 ` Michael Welling
2015-07-13 22:02 ` Pali Rohár
2015-07-13 22:36 ` Michael Welling
2015-07-14 7:14 ` Pali Rohár
2015-07-14 7:45 ` Tony Lindgren
2015-07-14 16:33 ` Michael Welling
2015-07-14 20:01 ` Pavel Machek
2015-07-14 20:17 ` Michael Welling
2015-07-15 19:49 ` Pavel Machek
2015-07-15 20:10 ` Michael Welling
2015-07-21 7:31 ` Pavel Machek
2015-07-21 7:33 ` Pavel Machek
2015-07-21 8:04 ` Pali Rohár
2015-07-20 20:48 ` Michael Welling
2015-07-20 20:46 ` Michael Welling
2015-07-20 20:58 ` Pali Rohár
2015-07-21 9:34 ` Pavel Machek
2015-07-21 21:28 ` Michael Welling [this message]
2015-07-22 0:17 ` Michael Welling
2015-07-22 2:03 ` Sebastian Reichel
2015-07-22 5:13 ` Michael Welling
2015-07-22 7:27 ` Pali Rohár
2015-07-22 13:33 ` Sebastian Reichel
2015-07-22 14:27 ` Pali Rohár
2015-07-22 13:30 ` Pavel Machek
2015-07-25 8:55 ` Pali Rohár
2015-07-28 8:39 ` Pali Rohár
2015-07-28 12:26 ` Sebastian Reichel
2015-07-28 12:32 ` Pali Rohár
2015-07-13 11:10 ` Pali Rohár
2015-07-13 13:26 ` Tony Lindgren
2015-07-13 15:51 ` Sebastian Reichel
2015-07-13 16:05 ` Pali Rohár
2015-07-13 19:32 ` Sebastian Reichel
2015-07-14 0:18 ` Krzysztof Kozlowski
2015-07-24 8:18 ` Dave Young
2015-07-24 8:30 ` Ivaylo Dimitrov
2015-07-24 10:28 ` Dave Young
2015-07-24 10:53 ` Pali Rohár
2015-07-24 8:40 ` Pali Rohár
2015-07-24 10:33 ` Dave Young
2015-07-24 10:52 ` Pali Rohár
2015-07-24 15:50 ` Pali Rohár
2015-07-24 8:51 ` Pavel Machek
2015-07-24 10:39 ` Dave Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150721212852.GA29640@deathstar \
--to=mwelling@ieee.org \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).