Re: [PATCH 3/3] ARM: dts: Add basic support for isee igepv5

From: Tony Lindgren <tony@atomide.com>
To: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: "Dmitry Lifshitz" <lifshitz@compulab.co.il>,
	"Pau Pajuel" <ppajuel@gmail.com>,
	"Dr. H. Nikolaus Schaller" <hns@goldelico.com>,
	"Agustí Fontquerni i Gorchs" <afontquerni@iseebcn.com>,
	egavin@iseebcn.com, "Grazvydas Ignotas" <notasas@gmail.com>,
	"Benoit Cousson" <bcousson@baylibre.com>,
	"Javier Martinez Canillas" <javier@dowhile0.org>,
	"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	"Robert Nelson" <robertcnelson@gmail.com>,
	"Marek Belisko" <marek@goldelico.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 3/3] ARM: dts: Add basic support for isee igepv5
Date: Fri, 16 Oct 2015 07:57:07 -0700	[thread overview]
Message-ID: <20151016145707.GU10113@atomide.com> (raw)
In-Reply-To: <CAFqH_52T8rPJp-8+Bb7Tjv-kcACU8FJGtqFWOhj02DzQ2yc7nw@mail.gmail.com>

* Enric Balletbo Serra <eballetbo@gmail.com> [151016 01:26]:
> Hi Tony,
> 
> Many thanks for the patch
> 
> 2015-10-13 19:18 GMT+02:00 Tony Lindgren <tony@atomide.com>:
> > With omap5-board-common.dtsi, we can now easily add support for various omap5
> > board variants. Let's add minimal support for isee igepv5.
> >
> > So far I've tested that basic things work, such as serial, USB Ethernet, HDMI
> > and WLAN.
> >
> > Note that like omap5-uevm, these boards seem to need to reserve 16MB for a
> > trap section as in commit 03178c66d289 ("ARM: dts: omap5-evm: Update
> > available memory to 2032 MB") and also noted in a u-boot commit at
> > http://marc.info/?l=u-boot&m=134376852603255 and also at
> > http://patchwork.ozlabs.org/patch/159881/.
> >
> > Not sure why this is not needed for omap5-cm-t54.dts, maybe because of
> > different u-boot configuration.
> >
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> >
> > Enric, can you please check if there are some critical pieces compared
> > to omap5-uevm that should be updated for this patch?
> >
> 
> Unfortunately I don't have the schematic and any IGEPv5 to verify your
> patches. From a quick view I can say that it's ok but let me cc
> Agustí, Eduard and Pau that will have access to the hardware and the
> schematics.

OK thanks. The thing to do is check against the omap5-board-common.dtsi in
this patch series so there's nothing unsuitable in omap5-board-common.dtsi
that needs an override in omap5-igep0050.dts.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel