From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: Re: [PATCH] rtc: ds1307: Fix alarm programming for mcp794xx Date: Tue, 27 Oct 2015 23:53:29 +0100 Message-ID: <20151027225329.GK22331@piout.net> References: <1445581797-19693-1-git-send-email-t-kristo@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1445581797-19693-1-git-send-email-t-kristo@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Tero Kristo Cc: a.zummo@towertech.it, linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org List-Id: linux-omap@vger.kernel.org On 23/10/2015 at 09:29:57 +0300, Tero Kristo wrote : > mcp794xx alarm registers must be written in BCD format. However, the > alarm programming logic neglected this by adding one to the value > after bin2bcd conversion has been already done, writing bad values > to month register in case the alarm being set is in October. In this > case, the alarm month value becomes 0x0a instead of the expected 0x10. > > Fix by moving the +1 addition within the bin2bcd call also. > > Fixes: 1d1945d261a2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips") > > Signed-off-by: Tero Kristo > --- > drivers/rtc/rtc-ds1307.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > Applied, thanks. -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com