[PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros

linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros
@ 2015-11-13  4:53 Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files Javier Martinez Canillas
                   ` (39 more replies)
  0 siblings, 40 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas, linux-gpio,
	Linus Walleij, Andrew F. Davis

Hello Tony,

This series converts all the remaining OMAP boards that didn't use the
IOPAD macros to specify the padconf register addresses. The only board
that I left was arch/arm/boot/dts/am335x-boneblack.dts because Andrew
already posted a patch for that DTS [0].

I built tested all the DTBs that are build by omap2plus_defconfig and
the md5 checksum was the same before and after the patches so there's
no functional change and is only to make the DTS more readable.

Patch #1 should be acked by the pinctrl maintainer and picked through
the linux-omap tree to maintain bisectability.

[0]: https://lkml.org/lkml/2015/10/24/114

Best regards,
Javier


Javier Martinez Canillas (39):
  pinctrl: Move am4372 and dra7 macros to the the SoC header files
  ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines
  ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-bone-common: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-bonegreen: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-chiliboard: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-chilisom: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-evm: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-evmsk: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-lxm: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-nano: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-pepper: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-phycore-som: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am335x-wega: Use AM33XX_IOPAD pinmux macro
  ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: am437x-gp-evm: Use AM4372_IOPAD pinmux macro
  ARM: dts: am437x-idk-evm: Use AM4372_IOPAD pinmux macro
  ARM: dts: am437x-sk-evm: Use AM4372_IOPAD pinmux macro
  ARM: dts: am43x-epos-evm: Use AM4372_IOPAD pinmux macro
  ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD pinmux macro
  ARM: dts: dra7-evm: Use DRA7XX_CORE_IOPAD pinmux macro
  ARM: dts: dra72-evm: Use DRA7XX_CORE_IOPAD pinmux macro
  ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros
  ARM: dts: omap3-beagle-xm: Use OMAP3_*_IOPAD pinmux macros
  ARM: dts: omap3-evm-37xx: Use OMAP3_*_IOPAD pinmux macros
  ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: omap3-n900: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: omap3-n9: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros
  ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD pinmux macro
  ARM: dts: omap4-panda-common: Use OMAP4_IOPAD pinmux macro
  ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro
  ARM: dts: omap4-sdp: Use OMAP4_IOPAD pinmux macro
  ARM: dts: omap4-sdp-es23plus: Use OMAP4_IOPAD pinmux macro
  ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro
  ARM: dts: omap5-board-common: Use OMAP5_IOPAD pinmux macro
  ARM: dts: omap5-cm-t54: Use OMAP5_IOPAD pinmux macro
  ARM: dts: omap5-uevm.dts: Use OMAP5_IOPAD pinmux macro

 arch/arm/boot/dts/am335x-baltos-ir5221.dts | 186 +++++++-------
 arch/arm/boot/dts/am335x-bone-common.dtsi  | 104 ++++----
 arch/arm/boot/dts/am335x-bonegreen.dts     |   4 +-
 arch/arm/boot/dts/am335x-chiliboard.dts    |  20 +-
 arch/arm/boot/dts/am335x-chilisom.dtsi     |  80 +++---
 arch/arm/boot/dts/am335x-evm.dts           | 220 ++++++++---------
 arch/arm/boot/dts/am335x-evmsk.dts         | 278 ++++++++++-----------
 arch/arm/boot/dts/am335x-lxm.dts           | 120 ++++-----
 arch/arm/boot/dts/am335x-nano.dts          | 140 +++++------
 arch/arm/boot/dts/am335x-pepper.dts        | 200 +++++++--------
 arch/arm/boot/dts/am335x-phycore-som.dtsi  |  60 ++---
 arch/arm/boot/dts/am335x-wega.dtsi         |  58 ++---
 arch/arm/boot/dts/am3517-craneboard.dts    |   2 +-
 arch/arm/boot/dts/am437x-gp-evm.dts        | 380 ++++++++++++++---------------
 arch/arm/boot/dts/am437x-idk-evm.dts       | 128 +++++-----
 arch/arm/boot/dts/am437x-sk-evm.dts        | 298 +++++++++++-----------
 arch/arm/boot/dts/am43x-epos-evm.dts       | 246 +++++++++----------
 arch/arm/boot/dts/am57xx-beagle-x15.dts    | 198 +++++++--------
 arch/arm/boot/dts/dra7-evm.dts             | 254 +++++++++----------
 arch/arm/boot/dts/dra72-evm.dts            | 200 +++++++--------
 arch/arm/boot/dts/omap3-beagle-xm.dts      |  18 +-
 arch/arm/boot/dts/omap3-beagle.dts         |  64 ++---
 arch/arm/boot/dts/omap3-evm-37xx.dts       |  54 ++--
 arch/arm/boot/dts/omap3-ldp.dts            |  42 ++--
 arch/arm/boot/dts/omap3-n900.dts           | 106 ++++----
 arch/arm/boot/dts/omap3-n950-n9.dtsi       |  12 +-
 arch/arm/boot/dts/omap3-zoom3.dts          |  60 ++---
 arch/arm/boot/dts/omap4-panda-a4.dts       |   6 +-
 arch/arm/boot/dts/omap4-panda-common.dtsi  | 164 ++++++-------
 arch/arm/boot/dts/omap4-panda-es.dts       |  10 +-
 arch/arm/boot/dts/omap4-sdp-es23plus.dts   |   6 +-
 arch/arm/boot/dts/omap4-sdp.dts            | 110 ++++-----
 arch/arm/boot/dts/omap5-board-common.dtsi  |  94 +++----
 arch/arm/boot/dts/omap5-cm-t54.dts         |   2 +-
 arch/arm/boot/dts/omap5-uevm.dts           |   4 +-
 arch/arm/boot/dts/twl4030_omap3.dtsi       |   2 +-
 arch/arm/boot/dts/twl6030_omap4.dtsi       |   4 +-
 include/dt-bindings/pinctrl/am43xx.h       |   6 +
 include/dt-bindings/pinctrl/dra.h          |   6 +
 include/dt-bindings/pinctrl/omap.h         |   2 -
 40 files changed, 1977 insertions(+), 1971 deletions(-)

-- 
2.4.3


^ permalink raw reply	[flat|nested] 49+ messages in thread

* [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-17 13:47   ` Linus Walleij
  2015-11-13  4:53 ` [PATCH 02/39] ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines Javier Martinez Canillas
                   ` (38 subsequent siblings)
  39 siblings, 1 reply; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas, linux-gpio,
	Linus Walleij

The <dt-bindings/pinctrl/omap.h> header file defines a set of macros
for different SoCs families that falls under the OMAP sub-arch, that
allow to define the padconf register physical address instead of the
register offset from the padconf base.

But the am43xx and dra7xx SoCs families have their own pinctrl header
file so the DTS using these SoCs aren't able to use the AM4372_IOPAD()
and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is
not included.

Move the macros to the correct header files so can be used by the DTS.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 include/dt-bindings/pinctrl/am43xx.h | 6 ++++++
 include/dt-bindings/pinctrl/dra.h    | 6 ++++++
 include/dt-bindings/pinctrl/omap.h   | 2 --
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index 774dc1e843c5..344bd1eb3386 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -31,5 +31,11 @@
 #define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN	(INPUT_EN)
 
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define AM4372_IOPAD(pa, val)	(((pa) & 0xffff) - 0x0800) (val)
+
 #endif
 
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 4379e29f0460..5c75e80915fc 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -67,5 +67,11 @@
 #define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
 
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define DRA7XX_CORE_IOPAD(pa, val)	(((pa) & 0xffff) - 0x3400) (val)
+
 #endif
 
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 13949259705a..8100de13851c 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -63,8 +63,6 @@
 #define OMAP3_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
 #define DM816X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM4372_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define DRA7XX_CORE_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
 
 /*
  * Macros to allow using the offset from the padconf physical address
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 02/39] ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 03/39] ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro Javier Martinez Canillas
                   ` (37 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

When the Device Tree source file got merged, some commented pinctrl lines
were left in the file. These are already defined so seems to be a cleanup
that was missed. Delete the unneeded lines from the file.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-baltos-ir5221.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 7d36601697da..3b42635bc995 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -109,8 +109,6 @@
 		pinctrl-single,pins = <
 			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */
 			0x184 0x28      /* uart1_txd, INPUT | MODE0 */
-			/*0x178 0x28*/      /* uart1_ctsn, INPUT | MODE0 */
-			/*0x17c 0x08*/      /* uart1_rtsn, OUTPUT | MODE0 */
 			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
 			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
 			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
@@ -124,8 +122,6 @@
 		pinctrl-single,pins = <
 			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
 			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
-			/*0x188 0x2a*/      /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
-			/*0x18c 0x2a*/      /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
 			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
 			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
 			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 03/39] ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 02/39] ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 04/39] ARM: dts: am335x-bone-common: " Javier Martinez Canillas
                   ` (36 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Also, use the mux defines instead of magic numbers for the padconf
values when defining the pinctrl lines to make it more readable.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-baltos-ir5221.dts | 182 ++++++++++++++---------------
 1 file changed, 91 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 3b42635bc995..ded1eb64ea52 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -56,171 +56,171 @@
 &am33xx_pinmux {
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
-			0x024 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
-			0x028 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
-			0x02c (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
-			0x080 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
-			0x084 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
-			0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
+			AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
 		>;
 	};
 
 	tps65910_pins: pinmux_tps65910_pins {
 		pinctrl-single,pins = <
-			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
 		>;
 	};
 
 	tca6416_pins: pinmux_tca6416_pins {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
-			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
 		>;
 	};
 
 	dcan1_pins: pinmux_dcan1_pins {
 		pinctrl-single,pins = <
-			0x168 0x0a      /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
-			0x16c 0x2a      /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */
-			0x184 0x28      /* uart1_txd, INPUT | MODE0 */
-			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
-			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
-			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
-			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
-			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
 
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nandflash_pins_s0: nandflash_pins_s0 {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 04/39] ARM: dts: am335x-bone-common: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (2 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 03/39] ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 05/39] ARM: dts: am335x-bonegreen: " Javier Martinez Canillas
                   ` (35 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-bone-common.dtsi | 104 +++++++++++++++---------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 5d370d54bd30..0cc150b87b86 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -67,112 +67,112 @@
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 05/39] ARM: dts: am335x-bonegreen: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (3 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 04/39] ARM: dts: am335x-bone-common: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 06/39] ARM: dts: am335x-chiliboard: " Javier Martinez Canillas
                   ` (34 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-bonegreen.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
index 0f65bdaaa583..dce3c8657e04 100644
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -36,8 +36,8 @@
 &am33xx_pinmux {
 	uart2_pins: uart2_pins {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 06/39] ARM: dts: am335x-chiliboard: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (4 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 05/39] ARM: dts: am335x-bonegreen: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 07/39] ARM: dts: am335x-chilisom: " Javier Martinez Canillas
                   ` (33 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-chiliboard.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20a8aa7..15d47ab28865 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -37,26 +37,26 @@
 &am33xx_pinmux {
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
 		>;
 	};
 
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	led_gpio_pins: led_gpio_pins {
 		pinctrl-single,pins = <
-			0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
-			0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+			AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 07/39] ARM: dts: am335x-chilisom: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (5 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 06/39] ARM: dts: am335x-chiliboard: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 08/39] ARM: dts: am335x-evm: " Javier Martinez Canillas
                   ` (32 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-chilisom.dtsi | 80 +++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 40 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 7e9a34dffe21..857d9894103a 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -29,81 +29,81 @@
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* mdio_data.mdio_data */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
 			/* mdio_clk.mdio_clk */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nandflash_pins: nandflash_pins {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 08/39] ARM: dts: am335x-evm: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (6 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 07/39] ARM: dts: am335x-chilisom: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 09/39] ARM: dts: am335x-evmsk: " Javier Martinez Canillas
                   ` (31 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Also, use the mux defines instead of magic numbers for the padconf
values when defining the pinctrl lines to make it more readable.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-evm.dts | 220 +++++++++++++++++++--------------------
 1 file changed, 110 insertions(+), 110 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d9d00ab863a2..4caf074063fe 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -168,215 +168,215 @@
 
 	matrix_keypad_s0: matrix_keypad_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 
 	volume_keys_s0: volume_keys_s0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	nandflash_pins_s0: nandflash_pins_s0 {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM33XX_IOPAD(0x964, MUX_MODE0)	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc3_pins: pinmux_mmc3_pins {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
 		>;
 	};
 
 	wlan_pins: pinmux_wlan_pins {
 		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
 		>;
 	};
 
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 09/39] ARM: dts: am335x-evmsk: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (7 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 08/39] ARM: dts: am335x-evm: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 10/39] ARM: dts: am335x-lxm: " Javier Martinez Canillas
                   ` (30 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Also, use the mux defines instead of magic numbers for the padconf
values when defining the pinctrl lines to make it more readable.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-evmsk.dts | 278 ++++++++++++++++++-------------------
 1 file changed, 139 insertions(+), 139 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 89442e98a837..9609668919f1 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -204,234 +204,234 @@
 
 	lcd_pins_default: lcd_pins_default {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	lcd_pins_sleep: lcd_pins_sleep {
 		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+			AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
 		>;
 	};
 
 	gpio_keys_s0: gpio_keys_s0 {
 		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+			AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	ecap2_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+			AM33XX_IOPAD(0x99c, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 10/39] ARM: dts: am335x-lxm: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (8 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 09/39] ARM: dts: am335x-evmsk: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 11/39] ARM: dts: am335x-nano: " Javier Martinez Canillas
                   ` (29 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-lxm.dts | 120 +++++++++++++++++++--------------------
 1 file changed, 60 insertions(+), 60 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 5c5667a3624d..d97b0efa43f3 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -46,109 +46,109 @@
 &am33xx_pinmux {
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 11/39] ARM: dts: am335x-nano: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (9 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 10/39] ARM: dts: am335x-lxm: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 12/39] ARM: dts: am335x-pepper: " Javier Martinez Canillas
                   ` (28 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-nano.dts | 140 +++++++++++++++++++-------------------
 1 file changed, 70 insertions(+), 70 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6eaf55..f313999c503e 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -41,121 +41,121 @@
 
 	misc_pins: misc_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
 		>;
 	};
 
 	gpmc_pins: gpmc_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
 		>;
 	};
 
 	uart2_pins: uart2_pins {
 		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+			AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+			AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
 		>;
 	};
 
 	uart4_pins: uart4_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+			AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
 		>;
 	};
 
 	uart5_pins: uart5_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+			AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
 		>;
 	};
 
 	mmc1_pins: mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 12/39] ARM: dts: am335x-pepper: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (10 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 11/39] ARM: dts: am335x-nano: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 13/39] ARM: dts: am335x-phycore-som: " Javier Martinez Canillas
                   ` (27 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-pepper.dts | 200 ++++++++++++++++++------------------
 1 file changed, 100 insertions(+), 100 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114c7464..f9d7239ebdaf 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 	i2c1_pins: pinmux_i2c1 {
 		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+			AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
 		>;
 	};
 };
@@ -130,7 +130,7 @@
 &am33xx_pinmux {
 	accel_pins: pinmux_accel {
 		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+			AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
 		>;
 	};
 };
@@ -177,12 +177,12 @@
 &am33xx_pinmux {
 	audio_pins: pinmux_audio {
 		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
 		>;
 	};
 };
@@ -228,36 +228,36 @@
 &am33xx_pinmux {
 	lcd_pins: pinmux_lcd {
 		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 };
@@ -291,29 +291,29 @@
 &am33xx_pinmux {
 	ethernet_pins: pinmux_ethernet {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
 			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
 		>;
 	};
 
 	mdio_pins: pinmux_mdio {
 		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 };
@@ -363,45 +363,45 @@
 &am33xx_pinmux {
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
 		>;
 	};
 	emmc_pins: pinmux_emmc {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
 			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
 		>;
 	};
 	wireless_pins: pinmux_wireless {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
 			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
 			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 };
@@ -497,10 +497,10 @@
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
 		>;
 	};
 };
@@ -538,16 +538,16 @@
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 	uart1_pins: pinmux_uart1 {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
 		>;
 	};
 };
@@ -590,9 +590,9 @@
 	usb_pins: pinmux_usb {
 		pinctrl-single,pins = <
 			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
 			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
 		>;
 	};
 };
@@ -648,16 +648,16 @@
 &am33xx_pinmux {
 	user_leds_pins: pinmux_user_leds {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 		>;
 	};
 
 	user_buttons_pins: pinmux_user_buttons {
 		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 13/39] ARM: dts: am335x-phycore-som: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (11 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 12/39] ARM: dts: am335x-pepper: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 14/39] ARM: dts: am335x-wega: " Javier Martinez Canillas
                   ` (26 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-phycore-som.dtsi | 60 +++++++++++++++----------------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 2f43e458ea4a..c20ae6c6f6c7 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -56,22 +56,22 @@
 &am33xx_pinmux {
 	ethernet0_pins: pinmux_ethernet0 {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
 		>;
 	};
 
 	mdio_pins: pinmux_mdio {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 };
@@ -103,8 +103,8 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 };
@@ -137,20 +137,20 @@
 &am33xx_pinmux {
 		nandflash_pins: pinmux_nandflash {
 			pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
@@ -324,10 +324,10 @@
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 14/39] ARM: dts: am335x-wega: Use AM33XX_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (12 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 13/39] ARM: dts: am335x-phycore-som: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 15/39] ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD " Javier Martinez Canillas
                   ` (25 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-wega.dtsi | 58 +++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 2cecb3951e1b..282f6d4b27bc 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -28,8 +28,8 @@
 &am33xx_pinmux {
 	dcan1_pins: pinmux_dcan1 {
 		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 		>;
 	};
 };
@@ -44,20 +44,20 @@
 &am33xx_pinmux {
 	ethernet1_pins: pinmux_ethernet1 {
 		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
-			0x48 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
-			0x4c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
-			0x50 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
-			0x54 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
 		>;
 	};
 };
@@ -79,13 +79,13 @@
 &am33xx_pinmux {
 	mmc1_pins: pinmux_mmc1 {
 		pinctrl-single,pins = <
-			0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
 		>;
 	};
 };
@@ -103,17 +103,17 @@
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 15/39] ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (13 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 14/39] ARM: dts: am335x-wega: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 16/39] ARM: dts: am437x-gp-evm: Use AM4372_IOPAD " Javier Martinez Canillas
                   ` (24 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am3517-craneboard.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index 2d40b3f241cd..cb7de1d4e05f 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -77,7 +77,7 @@
 &omap3_pmx_core {
 	tps_pins: pinmux_tps_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 16/39] ARM: dts: am437x-gp-evm: Use AM4372_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (14 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 15/39] ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 17/39] ARM: dts: am437x-idk-evm: " Javier Martinez Canillas
                   ` (23 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am437x-gp-evm.dts | 380 ++++++++++++++++++------------------
 1 file changed, 190 insertions(+), 190 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index d2450ab0a380..7f00e85eebed 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -154,138 +154,138 @@
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 		>;
 	};
 
 	pixcir_ts_pins: pixcir_ts_pins {
 		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nand_flash_x8: nand_flash_x8 {
 		pinctrl-single,pins = <
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 
 		>;
 	};
@@ -293,208 +293,208 @@
 	display_mux_pins: display_mux_pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
 
 	dcan0_default: dcan0_default_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
 		>;
 	};
 
 	dcan0_sleep: dcan0_sleep_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
 		>;
 	};
 
 	dcan1_default: dcan1_default_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
-			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
 		>;
 	};
 
 	dcan1_sleep: dcan1_sleep_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
-			0x184 (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
+			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
-			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
-			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
-			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
-			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
-			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
-			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_default: vpfe1_pins_default {
 		pinctrl-single,pins = <
-			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
-			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
-			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
-			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
-			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
-			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
-			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
-			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
-			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
-			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
-			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
-			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
-			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_sleep: vpfe1_pins_sleep {
 		pinctrl-single,pins = <
-			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
-			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
-			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
-			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
-			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
-			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
-			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
-			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
-			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
-			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
-			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
-			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
-			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	mmc3_pins_default: pinmux_mmc3_pins_default {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	wlan_pins_default: pinmux_wlan_pins_default {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	wlan_pins_sleep: pinmux_wlan_pins_sleep {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
-			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
-			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_sleep_pins: mcasp1_sleep_pins {
 		pinctrl-single,pins = <
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	gpio0_pins: gpio0_pins {
 		pinctrl-single,pins = <
-			0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
 		>;
 	};
 
 	emmc_pins_default: emmc_pins_default {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 		>;
 	};
 
 	emmc_pins_sleep: emmc_pins_sleep {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
-			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
-			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
-			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
-			0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
-			0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 17/39] ARM: dts: am437x-idk-evm: Use AM4372_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (15 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 16/39] ARM: dts: am437x-gp-evm: Use AM4372_IOPAD " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 18/39] ARM: dts: am437x-sk-evm: " Javier Martinez Canillas
                   ` (22 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am437x-idk-evm.dts | 128 +++++++++++++++++------------------
 1 file changed, 64 insertions(+), 64 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 337fb91ee74c..76dcfc6d5f0d 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -122,137 +122,137 @@
 &am43xx_pinmux {
 	gpio_keys_pins_default: gpio_keys_pins_default {
 		pinctrl-single,pins = <
-			0x1b8 (PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
 		>;
 	};
 
 	i2c0_pins_default: i2c0_pins_default {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c0_pins_sleep: i2c0_pins_sleep {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	i2c2_pins_default: i2c2_pins_default {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
-			0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
 		>;
 	};
 
 	i2c2_pins_sleep: i2c2_pins_sleep {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	ecap0_pins_default: backlight_pins_default {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	qspi_pins_default: qspi_pins_default {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	qspi_pins_sleep: qspi_pins_sleep{
 		pinctrl-single,pins = <
-			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 18/39] ARM: dts: am437x-sk-evm: Use AM4372_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (16 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 17/39] ARM: dts: am437x-idk-evm: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 19/39] ARM: dts: am43x-epos-evm: " Javier Martinez Canillas
                   ` (21 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am437x-sk-evm.dts | 298 ++++++++++++++++++------------------
 1 file changed, 149 insertions(+), 149 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 63de2a1b4315..d82dd6e3f9b1 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -157,259 +157,259 @@
 &am43xx_pinmux {
 	matrix_keypad_pins: matrix_keypad_pins {
 		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
 		>;
 	};
 
 	leds_pins: leds_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
-			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
-			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 
 			/* Slave 2 */
-			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT | MUX_MODE1)
-			0x028 (PIN_OUTPUT | MUX_MODE1)
-			0x02c (PIN_OUTPUT | MUX_MODE1)
-			0x030 (PIN_OUTPUT | MUX_MODE1)
-			0x034 (PIN_OUTPUT | MUX_MODE1)
-			0x038 (PIN_OUTPUT | MUX_MODE1)
-			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)
-			0x0ac (PIN_OUTPUT | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)
-			0x0bc (PIN_OUTPUT | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)
-			0x0cc (PIN_OUTPUT | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)
-			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
 
 		>;
 	};
 
 	qspi_pins: qspi_pins {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	lcd_pins: lcd_pins {
 		pinctrl-single,pins = <
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 		>;
 	};
 
 	usb1_pins: usb1_pins {
 		pinctrl-single,pins = <
-			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 
 	usb2_pins: usb2_pins {
 		pinctrl-single,pins = <
-			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 19/39] ARM: dts: am43x-epos-evm: Use AM4372_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (17 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 18/39] ARM: dts: am437x-sk-evm: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 20/39] ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD " Javier Martinez Canillas
                   ` (20 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am43x-epos-evm.dts | 246 +++++++++++++++++------------------
 1 file changed, 123 insertions(+), 123 deletions(-)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 47954ed990f8..746fd2b17958 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -144,228 +144,228 @@
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
 			>;
 		};
 
 		cpsw_sleep: cpsw_sleep {
 			pinctrl-single,pins = <
 				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		davinci_mdio_default: davinci_mdio_default {
 			pinctrl-single,pins = <
 				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 			>;
 		};
 
 		davinci_mdio_sleep: davinci_mdio_sleep {
 			pinctrl-single,pins = <
 				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		i2c0_pins: pinmux_i2c0_pins {
 			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			>;
 		};
 
 		nand_flash_x8: nand_flash_x8 {
 			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 			>;
 		};
 
 		ecap0_pins: backlight_pins {
 			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 			>;
 		};
 
 		i2c2_pins: pinmux_i2c2_pins {
 			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
 			>;
 		};
 
 		spi0_pins: pinmux_spi0_pins {
 			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
 			>;
 		};
 
 		spi1_pins: pinmux_spi1_pins {
 			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
 			>;
 		};
 
 		mmc1_pins: pinmux_mmc1_pins {
 			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 			>;
 		};
 
 		qspi1_default: qspi1_default {
 			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
 			>;
 		};
 
 		pixcir_ts_pins: pixcir_ts_pins {
 			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
 		hdq_pins: pinmux_hdq_pins {
 			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 			>;
 		};
 
 		dss_pins: dss_pins {
 			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 			>;
 		};
 
 		display_mux_pins: display_mux_pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
 		vpfe1_pins_default: vpfe1_pins_default {
 			pinctrl-single,pins = <
-				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
-				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
-				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
-				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
-				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
-				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
-				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
-				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
-				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
-				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
-				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
-				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
-				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
 			>;
 		};
 
 		vpfe1_pins_sleep: vpfe1_pins_sleep {
 			pinctrl-single,pins = <
-				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
 
 		mcasp1_pins: mcasp1_pins {
 			pinctrl-single,pins = <
-				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
-				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
-				0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
-				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
 			>;
 		};
 
 		mcasp1_sleep_pins: mcasp1_sleep_pins {
 			pinctrl-single,pins = <
-				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 20/39] ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (18 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 19/39] ARM: dts: am43x-epos-evm: " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:53 ` [PATCH 21/39] ARM: dts: dra7-evm: " Javier Martinez Canillas
                   ` (19 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/am57xx-beagle-x15.dts | 198 ++++++++++++++++----------------
 1 file changed, 99 insertions(+), 99 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index d9ba6b879fc1..d3b2a92e3a3c 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -181,97 +181,97 @@
 &dra7_pmx_core {
 	leds_pins_default: leds_pins_default {
 		pinctrl-single,pins = <
-			0x3a8 (PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			0x3ac (PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			0x3c0 (PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			0x3c4 (PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
+			DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
+			DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
+			DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
+			DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
 		>;
 	};
 
 	i2c1_pins_default: i2c1_pins_default {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			0x404 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
 		>;
 	};
 
 	hdmi_pins: pinmux_hdmi_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
 		>;
 	};
 
 	i2c3_pins_default: i2c3_pins_default {
 		pinctrl-single,pins = <
-			0x2a4 (PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			0x2a8 (PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
 		>;
 	};
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 		>;
 	};
 
 	mmc2_pins_default: mmc2_pins_default {
 		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 		>;
 	};
 
 	cpsw_pins_default: cpsw_pins_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
 		>;
 
 	};
@@ -279,115 +279,115 @@
 	cpsw_pins_sleep: cpsw_pins_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_INPUT | MUX_MODE15)
-			0x254 (PIN_INPUT | MUX_MODE15)
-			0x258 (PIN_INPUT | MUX_MODE15)
-			0x25c (PIN_INPUT | MUX_MODE15)
-			0x260 (PIN_INPUT | MUX_MODE15)
-			0x264 (PIN_INPUT | MUX_MODE15)
-			0x268 (PIN_INPUT | MUX_MODE15)
-			0x26c (PIN_INPUT | MUX_MODE15)
-			0x270 (PIN_INPUT | MUX_MODE15)
-			0x274 (PIN_INPUT | MUX_MODE15)
-			0x278 (PIN_INPUT | MUX_MODE15)
-			0x27c (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
 
 			/* Slave 2 */
-			0x198 (PIN_INPUT | MUX_MODE15)
-			0x19c (PIN_INPUT | MUX_MODE15)
-			0x1a0 (PIN_INPUT | MUX_MODE15)
-			0x1a4 (PIN_INPUT | MUX_MODE15)
-			0x1a8 (PIN_INPUT | MUX_MODE15)
-			0x1ac (PIN_INPUT | MUX_MODE15)
-			0x1b0 (PIN_INPUT | MUX_MODE15)
-			0x1b4 (PIN_INPUT | MUX_MODE15)
-			0x1b8 (PIN_INPUT | MUX_MODE15)
-			0x1bc (PIN_INPUT | MUX_MODE15)
-			0x1c0 (PIN_INPUT | MUX_MODE15)
-			0x1c4 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_pins_default: davinci_mdio_pins_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
 		>;
 	};
 
 	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 		pinctrl-single,pins = <
-			0x23c (PIN_INPUT | MUX_MODE15)
-			0x240 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
-			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
 		>;
 	};
 
 	tmp102_pins_default: tmp102_pins_default {
 		pinctrl-single,pins = <
-			0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
+			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
 		>;
 	};
 
 	mcp79410_pins_default: mcp79410_pins_default {
 		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
+			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
 		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
 
 	extcon_usb1_pins: extcon_usb1_pins {
 		pinctrl-single,pins = <
-			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x3b0 (PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			0x370 (PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
+			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
+			DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
 		>;
 	};
 
 	clkout2_pins_default: clkout2_pins_default {
 		pinctrl-single,pins = <
-			0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
+			DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
 		>;
 	};
 
 	clkout2_pins_sleep: clkout2_pins_sleep {
 		pinctrl-single,pins = <
-			0x294 (PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
+			DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
 		>;
 	};
 
 	mcasp3_pins_default: mcasp3_pins_default {
 		pinctrl-single,pins = <
-			0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
-			0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
-			0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
-			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
 		>;
 	};
 
 	mcasp3_pins_sleep: mcasp3_pins_sleep {
 		pinctrl-single,pins = <
-			0x324 (PIN_INPUT | MUX_MODE15)
-			0x328 (PIN_INPUT | MUX_MODE15)
-			0x32c (PIN_INPUT | MUX_MODE15)
-			0x330 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 21/39] ARM: dts: dra7-evm: Use DRA7XX_CORE_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (19 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 20/39] ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD " Javier Martinez Canillas
@ 2015-11-13  4:53 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 22/39] ARM: dts: dra72-evm: " Javier Martinez Canillas
                   ` (18 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:53 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/dra7-evm.dts | 254 ++++++++++++++++++++---------------------
 1 file changed, 127 insertions(+), 127 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 864f60020124..53b3a4b97086 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -154,100 +154,100 @@
 
 	vtt_pin: pinmux_vtt_pin {
 		pinctrl-single,pins = <
-			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+			DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
-			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
+			DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
+			DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+			DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+			DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+			DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+			DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 		>;
 	};
 
 	mcspi2_pins: pinmux_mcspi2_pins {
 		pinctrl-single,pins = <
-			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+			DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 		>;
 	};
 
 	qspi1_pins: pinmux_qspi1_pins {
 		pinctrl-single,pins = <
-			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
-			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
-			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
-			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+			DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
+			DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
+			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
+			DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
                 pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
                 >;
         };
 
 	usb2_pins: pinmux_usb2_pins {
                 pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
                 >;
         };
 
@@ -257,60 +257,60 @@
 		 * SW5.9 (GPMC_WPN) = LOW
 		 * SW5.1 (NAND_BOOTn) = HIGH */
 		pinctrl-single,pins = <
-			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
+			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
+			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
+			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
+			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
+			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
+			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
+			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
+			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
+			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
+			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
+			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
+			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
+			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
+			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
+			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
+			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
+			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
+			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
+			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
+			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
+			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
+			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
 
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
 		>;
 
 	};
@@ -318,85 +318,85 @@
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (MUX_MODE15)
-			0x254 (MUX_MODE15)
-			0x258 (MUX_MODE15)
-			0x25c (MUX_MODE15)
-			0x260 (MUX_MODE15)
-			0x264 (MUX_MODE15)
-			0x268 (MUX_MODE15)
-			0x26c (MUX_MODE15)
-			0x270 (MUX_MODE15)
-			0x274 (MUX_MODE15)
-			0x278 (MUX_MODE15)
-			0x27c (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
 
 			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 
 	atl_pins: pinmux_atl_pins {
 		pinctrl-single,pins = <
-			0x298 (PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
-			0x29c (PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
 		>;
 	};
 
 	mcasp3_pins: pinmux_mcasp3_pins {
 		pinctrl-single,pins = <
-			0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
-			0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
-			0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
-			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
 		>;
 	};
 
 	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
 		pinctrl-single,pins = <
-			0x324 (MUX_MODE15)
-			0x328 (MUX_MODE15)
-			0x32c (MUX_MODE15)
-			0x330 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 22/39] ARM: dts: dra72-evm: Use DRA7XX_CORE_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (20 preceding siblings ...)
  2015-11-13  4:53 ` [PATCH 21/39] ARM: dts: dra7-evm: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 23/39] ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros Javier Martinez Canillas
                   ` (17 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/dra72-evm.dts | 200 ++++++++++++++++++++--------------------
 1 file changed, 100 insertions(+), 100 deletions(-)

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index d6104d5f0c01..e5cc5d307f97 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -142,158 +142,158 @@
 &dra7_pmx_core {
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
 		>;
 	};
 
 	i2c5_pins: pinmux_i2c5_pins {
 		pinctrl-single,pins = <
-			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
 		>;
 	};
 
 	i2c5_pins: pinmux_i2c5_pins {
 		pinctrl-single,pins = <
-			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
 		>;
 	};
 
 	nand_default: nand_default {
 		pinctrl-single,pins = <
-			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
-			0x4	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
-			0x8	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
-			0xc	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
-			0x10	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
-			0x14	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
-			0x18	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
-			0x1c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
-			0x20	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
-			0x24	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
-			0x28	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
-			0x2c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
-			0x30	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
-			0x34	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
-			0x38	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
-			0x3c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
-			0xb4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
-			0xc4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
-			0xcc	(PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
-			0xc8	(PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
-			0xd0	(PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
-			0xd8	(PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
+			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
+			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
+			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
+			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
+			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
+			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
+			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
+			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
+			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
+			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
+			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
+			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
+			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
+			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
+			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
+			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
+			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
 		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
 
 	usb2_pins: pinmux_usb2_pins {
 		pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 		>;
 	};
 
 	tps65917_pins_default: tps65917_pins_default {
 		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
 		>;
 	};
 
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 		>;
 	};
 
 	mmc2_pins_default: mmc2_pins_default {
 		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 
 	qspi1_pins: pinmux_qspi1_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
+			DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
 		>;
 	};
 
 	hdmi_pins: pinmux_hdmi_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
 		>;
 	};
 
 	atl_pins: pinmux_atl_pins {
 		pinctrl-single,pins = <
-			0x298 (PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
-			0x29c (PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
 		>;
 	};
 
 	mcasp3_pins: pinmux_mcasp3_pins {
 		pinctrl-single,pins = <
-			0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
-			0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
-			0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
-			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
 		>;
 	};
 
 	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
 		pinctrl-single,pins = <
-			0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15)
-			0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15)
-			0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15)
-			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
 		>;
 	};
 };
@@ -627,18 +627,18 @@
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
 		>;
 
 	};
@@ -646,33 +646,33 @@
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 23/39] ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (21 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 22/39] ARM: dts: dra72-evm: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 24/39] ARM: dts: omap3-beagle-xm: " Javier Martinez Canillas
                   ` (16 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-beagle.dts | 64 +++++++++++++++++++-------------------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 274c2c482aaa..8dcf84ac79bb 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -171,7 +171,7 @@
 &omap3_pmx_wkup {
 	gpio1_pins: pinmux_gpio1_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
 		>;
 	};
 };
@@ -195,47 +195,47 @@
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 24/39] ARM: dts: omap3-beagle-xm: Use OMAP3_*_IOPAD pinmux macros
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (22 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 23/39] ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 25/39] ARM: dts: omap3-evm-37xx: " Javier Martinez Canillas
                   ` (15 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-beagle-xm.dts | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 73f1e3a8f62c..5e0bf475051e 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -176,18 +176,18 @@
 &omap3_pmx_wkup {
 	gpio1_pins: pinmux_gpio1_pins {
 		pinctrl-single,pins = <
-			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
 		>;
 	};
 
 	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 		>;
 	};
 };
@@ -200,8 +200,8 @@
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
 		>;
 	};
 
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 25/39] ARM: dts: omap3-evm-37xx: Use OMAP3_*_IOPAD pinmux macros
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (23 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 24/39] ARM: dts: omap3-beagle-xm: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 26/39] ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro Javier Martinez Canillas
                   ` (14 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-evm-37xx.dts | 54 ++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index bb339d1648e0..ac188657a95d 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -66,48 +66,48 @@
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
 		>;
 	};
 
 	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
-			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
 		>;
 	};
 
 	smsc911x_pins: pinmux_smsc911x_pins {
 		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
 };
@@ -115,12 +115,12 @@
 &omap3_pmx_wkup {
 	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 26/39] ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (24 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 25/39] ARM: dts: omap3-evm-37xx: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 27/39] ARM: dts: omap3-n900: " Javier Martinez Canillas
                   ` (13 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-ldp.dts | 42 ++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index d2fab8c0d4f8..0d0f1a7444f7 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -224,32 +224,32 @@
 &omap3_pmx_core {
 	gpio_key_pins: pinmux_gpio_key_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
 		>;
 	};
 
 	musb_pins: pinmux_musb_pins {
 		pinctrl-single,pins = <
-			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
 		>;
 	};
 
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 27/39] ARM: dts: omap3-n900: Use OMAP3_CORE1_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (25 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 26/39] ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 28/39] ARM: dts: omap3-n9: " Javier Martinez Canillas
                   ` (12 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-n900.dts | 106 +++++++++++++++++++--------------------
 1 file changed, 53 insertions(+), 53 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3d5b64..f8a20f32e26c 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -149,15 +149,15 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
 		>;
 	};
 
@@ -198,22 +198,22 @@
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x18e (PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
-			0x190 (PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
 		>;
 	};
 
@@ -225,85 +225,85 @@
 
 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
-			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
-			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
 		>;
 	};
 
 	acx565akm_pins: pinmux_acx565akm_pins {
 		pinctrl-single,pins = <
-			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
 
 	dss_sdi_pins: pinmux_dss_sdi_pins {
 		pinctrl-single,pins = <
-			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
-			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
-			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
-			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 
-			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
-			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 		>;
 	};
 
 	wl1251_pins: pinmux_wl1251 {
 		pinctrl-single,pins = <
-			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
-			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
 		>;
 	};
 
 	ssi_pins: pinmux_ssi {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
-			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
-			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
-			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
-			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
-			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
-			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
-			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
 		>;
 	};
 
 	modem_pins: pinmux_modem {
 		pinctrl-single,pins = <
-			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
-			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
-			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
-			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
-			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
-			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 28/39] ARM: dts: omap3-n9: Use OMAP3_CORE1_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (26 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 27/39] ARM: dts: omap3-n900: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 29/39] ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros Javier Martinez Canillas
                   ` (11 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-n950-n9.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index e9ee1df0e467..a2c2b8d8dd2c 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -36,12 +36,12 @@
 &omap3_pmx_core {
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 29/39] ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (27 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 28/39] ARM: dts: omap3-n9: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 30/39] ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro Javier Martinez Canillas
                   ` (10 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap3-zoom3.dts | 60 +++++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 7bc5fdd6981e..f19170bdcc1f 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -54,27 +54,27 @@
 	/* REVISIT: twl gpio0 is mmc0_cd */
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
 		>;
 	};
 
@@ -87,35 +87,35 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
-                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
 		>;
 	};
 };
@@ -135,7 +135,7 @@
 &omap3_pmx_wkup {
 	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
 		pinctrl-single,pins = <
-			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 30/39] ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (28 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 29/39] ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 31/39] ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD " Javier Martinez Canillas
                   ` (9 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/twl4030_omap3.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index 3537ae5b2146..5288e6dffef7 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -19,7 +19,7 @@
 	 */
 	twl4030_pins: pinmux_twl4030_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 31/39] ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (29 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 30/39] ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 32/39] ARM: dts: omap4-panda-common: " Javier Martinez Canillas
                   ` (8 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap4-panda-a4.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index 133f1b74e8ae..78d363177762 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 32/39] ARM: dts: omap4-panda-common: Use OMAP4_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (30 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 31/39] ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 33/39] ARM: dts: omap4-panda-es: " Javier Martinez Canillas
                   ` (7 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap4-panda-common.dtsi | 164 +++++++++++++++---------------
 1 file changed, 82 insertions(+), 82 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 18d096696fc0..df2e356ec089 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -199,129 +199,129 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
 		>;
 	};
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	hsusbb1_pins: pinmux_hsusbb1_pins {
 		pinctrl-single,pins = <
-			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
@@ -331,24 +331,24 @@
 	 */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
-			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
@@ -356,8 +356,8 @@
 &omap4_pmx_wkup {
 	led_wkgpio_pins: pinmux_leds_wkpins {
 		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 33/39] ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (31 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 32/39] ARM: dts: omap4-panda-common: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 34/39] ARM: dts: omap4-sdp: " Javier Martinez Canillas
                   ` (6 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap4-panda-es.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabcc6adf..119f8e657edc 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
 /* PandaboardES has external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
 
 &omap4_pmx_core {
 	led_gpio_pins: gpio_led_pmx {
 		pinctrl-single,pins = <
-			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
 		>;
 	};
 };
 
 &led_wkgpio_pins {
 	pinctrl-single,pins = <
-		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 	>;
 };
 
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 34/39] ARM: dts: omap4-sdp: Use OMAP4_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (32 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 33/39] ARM: dts: omap4-panda-es: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 35/39] ARM: dts: omap4-sdp-es23plus: " Javier Martinez Canillas
                   ` (5 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap4-sdp.dts | 110 ++++++++++++++++++++--------------------
 1 file changed, 55 insertions(+), 55 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index f0bdc41f8eff..aae513265dc2 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -212,143 +212,143 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	uart4_pins: pinmux_uart4_pins {
 		pinctrl-single,pins = <
-			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
+			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	dmic_pins: pinmux_dmic_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
+			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 35/39] ARM: dts: omap4-sdp-es23plus: Use OMAP4_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (33 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 34/39] ARM: dts: omap4-sdp: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 36/39] ARM: dts: twl6030: " Javier Martinez Canillas
                   ` (4 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap4-sdp-es23plus.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index aad5dda0f469..b4d19a7ae393 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
 /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 36/39] ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (34 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 35/39] ARM: dts: omap4-sdp-es23plus: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 37/39] ARM: dts: omap5-board-common: Use OMAP5_IOPAD " Javier Martinez Canillas
                   ` (3 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/twl6030_omap4.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa5703c42b..e373f59cea9c 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
 &omap4_pmx_wkup {
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -32,7 +32,7 @@
 &omap4_pmx_core {
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 37/39] ARM: dts: omap5-board-common: Use OMAP5_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (35 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 36/39] ARM: dts: twl6030: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 38/39] ARM: dts: omap5-cm-t54: " Javier Martinez Canillas
                   ` (2 subsequent siblings)
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap5-board-common.dtsi | 94 +++++++++++++++----------------
 1 file changed, 47 insertions(+), 47 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 5cf76a1c5c75..888412c63f97 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -139,60 +139,60 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
-			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
-			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
-			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
-			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
-			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
-			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	mcspi2_pins: pinmux_mcspi2_pins {
 		pinctrl-single,pins = <
-			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
-			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
 		>;
 	};
 
 	mcspi3_pins: pinmux_mcspi3_pins {
 		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
 		>;
 	};
 
@@ -215,59 +215,59 @@
 
 	usbhost_pins: pinmux_usbhost_pins {
 		pinctrl-single,pins = <
-			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
-			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
 
-			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
-			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
 
-			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
-			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
 		>;
 	};
 
 	led_gpio_pins: pinmux_led_gpio_pins {
 		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
-			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
-			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
 		>;
 	};
 
 	uart5_pins: pinmux_uart5_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
-			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
-			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
-			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+			OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
 		>;
 	};
 };
@@ -280,13 +280,13 @@
 
 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 		pinctrl-single,pins = <
-			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
 		>;
 	};
 
 	wlcore_irq_pin: pinmux_wlcore_irq_pin {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+			OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 38/39] ARM: dts: omap5-cm-t54: Use OMAP5_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (36 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 37/39] ARM: dts: omap5-board-common: Use OMAP5_IOPAD " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13  4:54 ` [PATCH 39/39] ARM: dts: omap5-uevm.dts: " Javier Martinez Canillas
  2015-11-13 14:47 ` [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Tony Lindgren
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 3774b37be6c8..0c03dca9ea04 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -175,7 +175,7 @@
 
 	ads7846_pins: pinmux_ads7846_pins {
 		pinctrl-single,pins = <
-			0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* [PATCH 39/39] ARM: dts: omap5-uevm.dts: Use OMAP5_IOPAD pinmux macro
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (37 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 38/39] ARM: dts: omap5-cm-t54: " Javier Martinez Canillas
@ 2015-11-13  4:54 ` Javier Martinez Canillas
  2015-11-13 14:47 ` [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Tony Lindgren
  39 siblings, 0 replies; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-13  4:54 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-omap, Tony Lindgren, Javier Martinez Canillas

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 arch/arm/boot/dts/omap5-uevm.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 05b1c1ebded8..60b3fbb3bf07 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -40,8 +40,8 @@
 &omap5_pmx_core {
 	i2c5_pins: pinmux_i2c5_pins {
 		pinctrl-single,pins = <
-			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
-			0x188 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
 		>;
 	};
 };
-- 
2.4.3

^ permalink raw reply related	[flat|nested] 49+ messages in thread

* Re: [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros
  2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
                   ` (38 preceding siblings ...)
  2015-11-13  4:54 ` [PATCH 39/39] ARM: dts: omap5-uevm.dts: " Javier Martinez Canillas
@ 2015-11-13 14:47 ` Tony Lindgren
  2015-11-16 16:38   ` Andrew F. Davis
  39 siblings, 1 reply; 49+ messages in thread
From: Tony Lindgren @ 2015-11-13 14:47 UTC (permalink / raw)
  To: Javier Martinez Canillas
  Cc: linux-kernel, linux-omap, linux-gpio, Linus Walleij,
	Andrew F. Davis

* Javier Martinez Canillas <javier@osg.samsung.com> [151112 20:55]:
> Hello Tony,
> 
> This series converts all the remaining OMAP boards that didn't use the
> IOPAD macros to specify the padconf register addresses. The only board
> that I left was arch/arm/boot/dts/am335x-boneblack.dts because Andrew
> already posted a patch for that DTS [0].
> 
> I built tested all the DTBs that are build by omap2plus_defconfig and
> the md5 checksum was the same before and after the patches so there's
> no functional change and is only to make the DTS more readable.

Yes great. Being able to compare the register against the documentation
helps quite a bit. I plan on applying this series before anything else
after -rc1 as it may require other patches to be rebased.

> Patch #1 should be acked by the pinctrl maintainer and picked through
> the linux-omap tree to maintain bisectability.
> 
> [0]: https://lkml.org/lkml/2015/10/24/114

OK let's wait for Linus to take a look at it.

Tony



> Javier Martinez Canillas (39):
>   pinctrl: Move am4372 and dra7 macros to the the SoC header files
>   ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines
>   ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-bone-common: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-bonegreen: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-chiliboard: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-chilisom: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-evm: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-evmsk: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-lxm: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-nano: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-pepper: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-phycore-som: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am335x-wega: Use AM33XX_IOPAD pinmux macro
>   ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD pinmux macro
>   ARM: dts: am437x-gp-evm: Use AM4372_IOPAD pinmux macro
>   ARM: dts: am437x-idk-evm: Use AM4372_IOPAD pinmux macro
>   ARM: dts: am437x-sk-evm: Use AM4372_IOPAD pinmux macro
>   ARM: dts: am43x-epos-evm: Use AM4372_IOPAD pinmux macro
>   ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD pinmux macro
>   ARM: dts: dra7-evm: Use DRA7XX_CORE_IOPAD pinmux macro
>   ARM: dts: dra72-evm: Use DRA7XX_CORE_IOPAD pinmux macro
>   ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros
>   ARM: dts: omap3-beagle-xm: Use OMAP3_*_IOPAD pinmux macros
>   ARM: dts: omap3-evm-37xx: Use OMAP3_*_IOPAD pinmux macros
>   ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro
>   ARM: dts: omap3-n900: Use OMAP3_CORE1_IOPAD pinmux macro
>   ARM: dts: omap3-n9: Use OMAP3_CORE1_IOPAD pinmux macro
>   ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros
>   ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro
>   ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD pinmux macro
>   ARM: dts: omap4-panda-common: Use OMAP4_IOPAD pinmux macro
>   ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro
>   ARM: dts: omap4-sdp: Use OMAP4_IOPAD pinmux macro
>   ARM: dts: omap4-sdp-es23plus: Use OMAP4_IOPAD pinmux macro
>   ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro
>   ARM: dts: omap5-board-common: Use OMAP5_IOPAD pinmux macro
>   ARM: dts: omap5-cm-t54: Use OMAP5_IOPAD pinmux macro
>   ARM: dts: omap5-uevm.dts: Use OMAP5_IOPAD pinmux macro
> 
>  arch/arm/boot/dts/am335x-baltos-ir5221.dts | 186 +++++++-------
>  arch/arm/boot/dts/am335x-bone-common.dtsi  | 104 ++++----
>  arch/arm/boot/dts/am335x-bonegreen.dts     |   4 +-
>  arch/arm/boot/dts/am335x-chiliboard.dts    |  20 +-
>  arch/arm/boot/dts/am335x-chilisom.dtsi     |  80 +++---
>  arch/arm/boot/dts/am335x-evm.dts           | 220 ++++++++---------
>  arch/arm/boot/dts/am335x-evmsk.dts         | 278 ++++++++++-----------
>  arch/arm/boot/dts/am335x-lxm.dts           | 120 ++++-----
>  arch/arm/boot/dts/am335x-nano.dts          | 140 +++++------
>  arch/arm/boot/dts/am335x-pepper.dts        | 200 +++++++--------
>  arch/arm/boot/dts/am335x-phycore-som.dtsi  |  60 ++---
>  arch/arm/boot/dts/am335x-wega.dtsi         |  58 ++---
>  arch/arm/boot/dts/am3517-craneboard.dts    |   2 +-
>  arch/arm/boot/dts/am437x-gp-evm.dts        | 380 ++++++++++++++---------------
>  arch/arm/boot/dts/am437x-idk-evm.dts       | 128 +++++-----
>  arch/arm/boot/dts/am437x-sk-evm.dts        | 298 +++++++++++-----------
>  arch/arm/boot/dts/am43x-epos-evm.dts       | 246 +++++++++----------
>  arch/arm/boot/dts/am57xx-beagle-x15.dts    | 198 +++++++--------
>  arch/arm/boot/dts/dra7-evm.dts             | 254 +++++++++----------
>  arch/arm/boot/dts/dra72-evm.dts            | 200 +++++++--------
>  arch/arm/boot/dts/omap3-beagle-xm.dts      |  18 +-
>  arch/arm/boot/dts/omap3-beagle.dts         |  64 ++---
>  arch/arm/boot/dts/omap3-evm-37xx.dts       |  54 ++--
>  arch/arm/boot/dts/omap3-ldp.dts            |  42 ++--
>  arch/arm/boot/dts/omap3-n900.dts           | 106 ++++----
>  arch/arm/boot/dts/omap3-n950-n9.dtsi       |  12 +-
>  arch/arm/boot/dts/omap3-zoom3.dts          |  60 ++---
>  arch/arm/boot/dts/omap4-panda-a4.dts       |   6 +-
>  arch/arm/boot/dts/omap4-panda-common.dtsi  | 164 ++++++-------
>  arch/arm/boot/dts/omap4-panda-es.dts       |  10 +-
>  arch/arm/boot/dts/omap4-sdp-es23plus.dts   |   6 +-
>  arch/arm/boot/dts/omap4-sdp.dts            | 110 ++++-----
>  arch/arm/boot/dts/omap5-board-common.dtsi  |  94 +++----
>  arch/arm/boot/dts/omap5-cm-t54.dts         |   2 +-
>  arch/arm/boot/dts/omap5-uevm.dts           |   4 +-
>  arch/arm/boot/dts/twl4030_omap3.dtsi       |   2 +-
>  arch/arm/boot/dts/twl6030_omap4.dtsi       |   4 +-
>  include/dt-bindings/pinctrl/am43xx.h       |   6 +
>  include/dt-bindings/pinctrl/dra.h          |   6 +
>  include/dt-bindings/pinctrl/omap.h         |   2 -
>  40 files changed, 1977 insertions(+), 1971 deletions(-)
> 
> -- 
> 2.4.3
> 

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros
  2015-11-13 14:47 ` [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Tony Lindgren
@ 2015-11-16 16:38   ` Andrew F. Davis
  2015-11-30 16:49     ` Tony Lindgren
  0 siblings, 1 reply; 49+ messages in thread
From: Andrew F. Davis @ 2015-11-16 16:38 UTC (permalink / raw)
  To: Tony Lindgren, Javier Martinez Canillas
  Cc: linux-kernel, linux-omap, linux-gpio, Linus Walleij

On 11/13/2015 08:47 AM, Tony Lindgren wrote:
> * Javier Martinez Canillas <javier@osg.samsung.com> [151112 20:55]:
>> Hello Tony,
>>
>> This series converts all the remaining OMAP boards that didn't use the
>> IOPAD macros to specify the padconf register addresses. The only board
>> that I left was arch/arm/boot/dts/am335x-boneblack.dts because Andrew
>> already posted a patch for that DTS [0].
>>
>> I built tested all the DTBs that are build by omap2plus_defconfig and
>> the md5 checksum was the same before and after the patches so there's
>> no functional change and is only to make the DTS more readable.
>
> Yes great. Being able to compare the register against the documentation
> helps quite a bit. I plan on applying this series before anything else
> after -rc1 as it may require other patches to be rebased.
>
>> Patch #1 should be acked by the pinctrl maintainer and picked through
>> the linux-omap tree to maintain bisectability.
>>
>> [0]: https://lkml.org/lkml/2015/10/24/114
>

v3 of my little contribution also out when you pull:
https://lkml.org/lkml/2015/11/13/480

> OK let's wait for Linus to take a look at it.
>
> Tony
>
>
>
>> Javier Martinez Canillas (39):
>>    pinctrl: Move am4372 and dra7 macros to the the SoC header files
>>    ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines
>>    ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-bone-common: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-bonegreen: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-chiliboard: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-chilisom: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-evm: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-evmsk: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-lxm: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-nano: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-pepper: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-phycore-som: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am335x-wega: Use AM33XX_IOPAD pinmux macro
>>    ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD pinmux macro
>>    ARM: dts: am437x-gp-evm: Use AM4372_IOPAD pinmux macro
>>    ARM: dts: am437x-idk-evm: Use AM4372_IOPAD pinmux macro
>>    ARM: dts: am437x-sk-evm: Use AM4372_IOPAD pinmux macro
>>    ARM: dts: am43x-epos-evm: Use AM4372_IOPAD pinmux macro
>>    ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD pinmux macro
>>    ARM: dts: dra7-evm: Use DRA7XX_CORE_IOPAD pinmux macro
>>    ARM: dts: dra72-evm: Use DRA7XX_CORE_IOPAD pinmux macro
>>    ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros
>>    ARM: dts: omap3-beagle-xm: Use OMAP3_*_IOPAD pinmux macros
>>    ARM: dts: omap3-evm-37xx: Use OMAP3_*_IOPAD pinmux macros
>>    ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro
>>    ARM: dts: omap3-n900: Use OMAP3_CORE1_IOPAD pinmux macro
>>    ARM: dts: omap3-n9: Use OMAP3_CORE1_IOPAD pinmux macro
>>    ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros
>>    ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro
>>    ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD pinmux macro
>>    ARM: dts: omap4-panda-common: Use OMAP4_IOPAD pinmux macro
>>    ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro
>>    ARM: dts: omap4-sdp: Use OMAP4_IOPAD pinmux macro
>>    ARM: dts: omap4-sdp-es23plus: Use OMAP4_IOPAD pinmux macro
>>    ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro
>>    ARM: dts: omap5-board-common: Use OMAP5_IOPAD pinmux macro
>>    ARM: dts: omap5-cm-t54: Use OMAP5_IOPAD pinmux macro
>>    ARM: dts: omap5-uevm.dts: Use OMAP5_IOPAD pinmux macro
>>
>>   arch/arm/boot/dts/am335x-baltos-ir5221.dts | 186 +++++++-------
>>   arch/arm/boot/dts/am335x-bone-common.dtsi  | 104 ++++----
>>   arch/arm/boot/dts/am335x-bonegreen.dts     |   4 +-
>>   arch/arm/boot/dts/am335x-chiliboard.dts    |  20 +-
>>   arch/arm/boot/dts/am335x-chilisom.dtsi     |  80 +++---
>>   arch/arm/boot/dts/am335x-evm.dts           | 220 ++++++++---------
>>   arch/arm/boot/dts/am335x-evmsk.dts         | 278 ++++++++++-----------
>>   arch/arm/boot/dts/am335x-lxm.dts           | 120 ++++-----
>>   arch/arm/boot/dts/am335x-nano.dts          | 140 +++++------
>>   arch/arm/boot/dts/am335x-pepper.dts        | 200 +++++++--------
>>   arch/arm/boot/dts/am335x-phycore-som.dtsi  |  60 ++---
>>   arch/arm/boot/dts/am335x-wega.dtsi         |  58 ++---
>>   arch/arm/boot/dts/am3517-craneboard.dts    |   2 +-
>>   arch/arm/boot/dts/am437x-gp-evm.dts        | 380 ++++++++++++++---------------
>>   arch/arm/boot/dts/am437x-idk-evm.dts       | 128 +++++-----
>>   arch/arm/boot/dts/am437x-sk-evm.dts        | 298 +++++++++++-----------
>>   arch/arm/boot/dts/am43x-epos-evm.dts       | 246 +++++++++----------
>>   arch/arm/boot/dts/am57xx-beagle-x15.dts    | 198 +++++++--------
>>   arch/arm/boot/dts/dra7-evm.dts             | 254 +++++++++----------
>>   arch/arm/boot/dts/dra72-evm.dts            | 200 +++++++--------
>>   arch/arm/boot/dts/omap3-beagle-xm.dts      |  18 +-
>>   arch/arm/boot/dts/omap3-beagle.dts         |  64 ++---
>>   arch/arm/boot/dts/omap3-evm-37xx.dts       |  54 ++--
>>   arch/arm/boot/dts/omap3-ldp.dts            |  42 ++--
>>   arch/arm/boot/dts/omap3-n900.dts           | 106 ++++----
>>   arch/arm/boot/dts/omap3-n950-n9.dtsi       |  12 +-
>>   arch/arm/boot/dts/omap3-zoom3.dts          |  60 ++---
>>   arch/arm/boot/dts/omap4-panda-a4.dts       |   6 +-
>>   arch/arm/boot/dts/omap4-panda-common.dtsi  | 164 ++++++-------
>>   arch/arm/boot/dts/omap4-panda-es.dts       |  10 +-
>>   arch/arm/boot/dts/omap4-sdp-es23plus.dts   |   6 +-
>>   arch/arm/boot/dts/omap4-sdp.dts            | 110 ++++-----
>>   arch/arm/boot/dts/omap5-board-common.dtsi  |  94 +++----
>>   arch/arm/boot/dts/omap5-cm-t54.dts         |   2 +-
>>   arch/arm/boot/dts/omap5-uevm.dts           |   4 +-
>>   arch/arm/boot/dts/twl4030_omap3.dtsi       |   2 +-
>>   arch/arm/boot/dts/twl6030_omap4.dtsi       |   4 +-
>>   include/dt-bindings/pinctrl/am43xx.h       |   6 +
>>   include/dt-bindings/pinctrl/dra.h          |   6 +
>>   include/dt-bindings/pinctrl/omap.h         |   2 -
>>   40 files changed, 1977 insertions(+), 1971 deletions(-)
>>
>> --
>> 2.4.3
>>

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-13  4:53 ` [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files Javier Martinez Canillas
@ 2015-11-17 13:47   ` Linus Walleij
  2015-11-17 13:50     ` Javier Martinez Canillas
  0 siblings, 1 reply; 49+ messages in thread
From: Linus Walleij @ 2015-11-17 13:47 UTC (permalink / raw)
  To: Javier Martinez Canillas
  Cc: linux-kernel@vger.kernel.org, Linux-OMAP, Tony Lindgren,
	linux-gpio@vger.kernel.org

On Fri, Nov 13, 2015 at 5:53 AM, Javier Martinez Canillas
<javier@osg.samsung.com> wrote:

> The <dt-bindings/pinctrl/omap.h> header file defines a set of macros
> for different SoCs families that falls under the OMAP sub-arch, that
> allow to define the padconf register physical address instead of the
> register offset from the padconf base.
>
> But the am43xx and dra7xx SoCs families have their own pinctrl header
> file so the DTS using these SoCs aren't able to use the AM4372_IOPAD()
> and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is
> not included.
>
> Move the macros to the correct header files so can be used by the DTS.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

I need Tony's ACK on this.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-17 13:47   ` Linus Walleij
@ 2015-11-17 13:50     ` Javier Martinez Canillas
  2015-11-19  0:23       ` Tony Lindgren
  0 siblings, 1 reply; 49+ messages in thread
From: Javier Martinez Canillas @ 2015-11-17 13:50 UTC (permalink / raw)
  To: Linus Walleij
  Cc: linux-kernel@vger.kernel.org, Linux-OMAP, Tony Lindgren,
	linux-gpio@vger.kernel.org

Hello Linus,

On 11/17/2015 10:47 AM, Linus Walleij wrote:
> On Fri, Nov 13, 2015 at 5:53 AM, Javier Martinez Canillas
> <javier@osg.samsung.com> wrote:
> 
>> The <dt-bindings/pinctrl/omap.h> header file defines a set of macros
>> for different SoCs families that falls under the OMAP sub-arch, that
>> allow to define the padconf register physical address instead of the
>> register offset from the padconf base.
>>
>> But the am43xx and dra7xx SoCs families have their own pinctrl header
>> file so the DTS using these SoCs aren't able to use the AM4372_IOPAD()
>> and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is
>> not included.
>>
>> Move the macros to the correct header files so can be used by the DTS.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 
> I need Tony's ACK on this.
>

OK, I believe he was waiting for yours to pick the series though ;)
 
> Yours,
> Linus Walleij
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-17 13:50     ` Javier Martinez Canillas
@ 2015-11-19  0:23       ` Tony Lindgren
  2015-11-25 18:39         ` Tony Lindgren
  0 siblings, 1 reply; 49+ messages in thread
From: Tony Lindgren @ 2015-11-19  0:23 UTC (permalink / raw)
  To: Javier Martinez Canillas
  Cc: Linus Walleij, linux-kernel@vger.kernel.org, Linux-OMAP,
	linux-gpio@vger.kernel.org

* Javier Martinez Canillas <javier@osg.samsung.com> [151117 05:51]:
> Hello Linus,
> 
> On 11/17/2015 10:47 AM, Linus Walleij wrote:
> > On Fri, Nov 13, 2015 at 5:53 AM, Javier Martinez Canillas
> > <javier@osg.samsung.com> wrote:
> > 
> >> The <dt-bindings/pinctrl/omap.h> header file defines a set of macros
> >> for different SoCs families that falls under the OMAP sub-arch, that
> >> allow to define the padconf register physical address instead of the
> >> register offset from the padconf base.
> >>
> >> But the am43xx and dra7xx SoCs families have their own pinctrl header
> >> file so the DTS using these SoCs aren't able to use the AM4372_IOPAD()
> >> and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is
> >> not included.
> >>
> >> Move the macros to the correct header files so can be used by the DTS.
> >>
> >> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> > 
> > I need Tony's ACK on this.
> >
> 
> OK, I believe he was waiting for yours to pick the series though ;)

Yeah probably best to keep this series together if you're OK with that.

Regards,

Tony

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-19  0:23       ` Tony Lindgren
@ 2015-11-25 18:39         ` Tony Lindgren
  2015-11-30 16:46           ` Tony Lindgren
  2015-12-10 16:48           ` Linus Walleij
  0 siblings, 2 replies; 49+ messages in thread
From: Tony Lindgren @ 2015-11-25 18:39 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Javier Martinez Canillas, linux-kernel@vger.kernel.org,
	Linux-OMAP, linux-gpio@vger.kernel.org

Linus,

* Tony Lindgren <tony@atomide.com> [151118 16:25]:
> * Javier Martinez Canillas <javier@osg.samsung.com> [151117 05:51]:
> > Hello Linus,
> > 
> > On 11/17/2015 10:47 AM, Linus Walleij wrote:
> > > On Fri, Nov 13, 2015 at 5:53 AM, Javier Martinez Canillas
> > > <javier@osg.samsung.com> wrote:
> > > 
> > >> The <dt-bindings/pinctrl/omap.h> header file defines a set of macros
> > >> for different SoCs families that falls under the OMAP sub-arch, that
> > >> allow to define the padconf register physical address instead of the
> > >> register offset from the padconf base.
> > >>
> > >> But the am43xx and dra7xx SoCs families have their own pinctrl header
> > >> file so the DTS using these SoCs aren't able to use the AM4372_IOPAD()
> > >> and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is
> > >> not included.
> > >>
> > >> Move the macros to the correct header files so can be used by the DTS.
> > >>
> > >> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> > > 
> > > I need Tony's ACK on this.
> > >
> > 
> > OK, I believe he was waiting for yours to pick the series though ;)
> 
> Yeah probably best to keep this series together if you're OK with that.

Care to ack this one? I'd like to apply this series for v4.5 within next
few days..

Regards,

Tony

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-25 18:39         ` Tony Lindgren
@ 2015-11-30 16:46           ` Tony Lindgren
  2015-12-10 16:48           ` Linus Walleij
  1 sibling, 0 replies; 49+ messages in thread
From: Tony Lindgren @ 2015-11-30 16:46 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Javier Martinez Canillas, linux-kernel@vger.kernel.org,
	Linux-OMAP, linux-gpio@vger.kernel.org

* Tony Lindgren <tony@atomide.com> [151125 10:40]:
> Linus,
> 
> * Tony Lindgren <tony@atomide.com> [151118 16:25]:
> > * Javier Martinez Canillas <javier@osg.samsung.com> [151117 05:51]:
> > > Hello Linus,
> > > 
> > > On 11/17/2015 10:47 AM, Linus Walleij wrote:
> > > > On Fri, Nov 13, 2015 at 5:53 AM, Javier Martinez Canillas
> > > > <javier@osg.samsung.com> wrote:
> > > > 
> > > >> The <dt-bindings/pinctrl/omap.h> header file defines a set of macros
> > > >> for different SoCs families that falls under the OMAP sub-arch, that
> > > >> allow to define the padconf register physical address instead of the
> > > >> register offset from the padconf base.
> > > >>
> > > >> But the am43xx and dra7xx SoCs families have their own pinctrl header
> > > >> file so the DTS using these SoCs aren't able to use the AM4372_IOPAD()
> > > >> and DRA7XX_CORE_IOPAD() macros since <dt-bindings/pinctrl/omap.h> is
> > > >> not included.
> > > >>
> > > >> Move the macros to the correct header files so can be used by the DTS.
> > > >>
> > > >> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> > > > 
> > > > I need Tony's ACK on this.
> > > >
> > > 
> > > OK, I believe he was waiting for yours to pick the series though ;)
> > 
> > Yeah probably best to keep this series together if you're OK with that.
> 
> Care to ack this one? I'd like to apply this series for v4.5 within next
> few days..

Applying this series today into omap-for-v4.5/dt.

Regards,

Tony

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros
  2015-11-16 16:38   ` Andrew F. Davis
@ 2015-11-30 16:49     ` Tony Lindgren
  0 siblings, 0 replies; 49+ messages in thread
From: Tony Lindgren @ 2015-11-30 16:49 UTC (permalink / raw)
  To: Andrew F. Davis
  Cc: Javier Martinez Canillas, linux-kernel, linux-omap, linux-gpio,
	Linus Walleij

* Andrew F. Davis <afd@ti.com> [151116 08:39]:
> On 11/13/2015 08:47 AM, Tony Lindgren wrote:
> >* Javier Martinez Canillas <javier@osg.samsung.com> [151112 20:55]:
> >>Hello Tony,
> >>
> >>This series converts all the remaining OMAP boards that didn't use the
> >>IOPAD macros to specify the padconf register addresses. The only board
> >>that I left was arch/arm/boot/dts/am335x-boneblack.dts because Andrew
> >>already posted a patch for that DTS [0].
> >>
> >>I built tested all the DTBs that are build by omap2plus_defconfig and
> >>the md5 checksum was the same before and after the patches so there's
> >>no functional change and is only to make the DTS more readable.
> >
> >Yes great. Being able to compare the register against the documentation
> >helps quite a bit. I plan on applying this series before anything else
> >after -rc1 as it may require other patches to be rebased.
> >
> >>Patch #1 should be acked by the pinctrl maintainer and picked through
> >>the linux-omap tree to maintain bisectability.
> >>
> >>[0]: https://lkml.org/lkml/2015/10/24/114
> >
> 
> v3 of my little contribution also out when you pull:
> https://lkml.org/lkml/2015/11/13/480

Applying that one too into omap-for-v4.5/dt thanks.

Tony

^ permalink raw reply	[flat|nested] 49+ messages in thread

* Re: [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files
  2015-11-25 18:39         ` Tony Lindgren
  2015-11-30 16:46           ` Tony Lindgren
@ 2015-12-10 16:48           ` Linus Walleij
  1 sibling, 0 replies; 49+ messages in thread
From: Linus Walleij @ 2015-12-10 16:48 UTC (permalink / raw)
  To: Tony Lindgren
  Cc: Javier Martinez Canillas, linux-kernel@vger.kernel.org,
	Linux-OMAP, linux-gpio@vger.kernel.org

On Wed, Nov 25, 2015 at 7:39 PM, Tony Lindgren <tony@atomide.com> wrote:
> Linus,
(...)
>> > OK, I believe he was waiting for yours to pick the series though ;)
>>
>> Yeah probably best to keep this series together if you're OK with that.
>
> Care to ack this one? I'd like to apply this series for v4.5 within next
> few days..

Sorry for the delay. ACK.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 49+ messages in thread

end of thread, other threads:[~2015-12-10 16:48 UTC | newest]

Thread overview: 49+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-13  4:53 [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 01/39] pinctrl: Move am4372 and dra7 macros to the the SoC header files Javier Martinez Canillas
2015-11-17 13:47   ` Linus Walleij
2015-11-17 13:50     ` Javier Martinez Canillas
2015-11-19  0:23       ` Tony Lindgren
2015-11-25 18:39         ` Tony Lindgren
2015-11-30 16:46           ` Tony Lindgren
2015-12-10 16:48           ` Linus Walleij
2015-11-13  4:53 ` [PATCH 02/39] ARM: dts: am335x-baltos-ir5221: Remove leftover pinctrl lines Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 03/39] ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 04/39] ARM: dts: am335x-bone-common: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 05/39] ARM: dts: am335x-bonegreen: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 06/39] ARM: dts: am335x-chiliboard: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 07/39] ARM: dts: am335x-chilisom: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 08/39] ARM: dts: am335x-evm: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 09/39] ARM: dts: am335x-evmsk: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 10/39] ARM: dts: am335x-lxm: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 11/39] ARM: dts: am335x-nano: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 12/39] ARM: dts: am335x-pepper: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 13/39] ARM: dts: am335x-phycore-som: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 14/39] ARM: dts: am335x-wega: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 15/39] ARM: dts: am3517-craneboard: Use OMAP3_CORE1_IOPAD " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 16/39] ARM: dts: am437x-gp-evm: Use AM4372_IOPAD " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 17/39] ARM: dts: am437x-idk-evm: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 18/39] ARM: dts: am437x-sk-evm: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 19/39] ARM: dts: am43x-epos-evm: " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 20/39] ARM: dts: am57xx-beagle-x15: Use DRA7XX_CORE_IOPAD " Javier Martinez Canillas
2015-11-13  4:53 ` [PATCH 21/39] ARM: dts: dra7-evm: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 22/39] ARM: dts: dra72-evm: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 23/39] ARM: dts: omap3-beagle: Use OMAP3_*_IOPAD pinmux macros Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 24/39] ARM: dts: omap3-beagle-xm: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 25/39] ARM: dts: omap3-evm-37xx: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 26/39] ARM: dts: omap3-ldp: Use OMAP3_CORE1_IOPAD pinmux macro Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 27/39] ARM: dts: omap3-n900: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 28/39] ARM: dts: omap3-n9: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 29/39] ARM: dts: omap3-zoom3: Use OMAP3_*_IOPAD pinmux macros Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 30/39] ARM: dts: twl4030: Use OMAP3_CORE1_IOPAD pinmux macro Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 31/39] ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 32/39] ARM: dts: omap4-panda-common: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 33/39] ARM: dts: omap4-panda-es: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 34/39] ARM: dts: omap4-sdp: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 35/39] ARM: dts: omap4-sdp-es23plus: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 36/39] ARM: dts: twl6030: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 37/39] ARM: dts: omap5-board-common: Use OMAP5_IOPAD " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 38/39] ARM: dts: omap5-cm-t54: " Javier Martinez Canillas
2015-11-13  4:54 ` [PATCH 39/39] ARM: dts: omap5-uevm.dts: " Javier Martinez Canillas
2015-11-13 14:47 ` [PATCH 00/39] ARM: dts: Convert OMAP boards to use IOPAD pinmux macros Tony Lindgren
2015-11-16 16:38   ` Andrew F. Davis
2015-11-30 16:49     ` Tony Lindgren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).