Re: [PATCH v2 0/3] drivers: net: cpsw: Fix bugs in fixed-link PHY DT parsing

[David Miller <davem@davemloft.net>]

From: "David Rivshin (Allworx)" <drivshin.allworx@gmail.com>
Date: Wed, 16 Dec 2015 23:02:08 -0500

> Commit 1f71e8c96fc654724723ce987e0a8b2aeb81746d ("drivers: net: cpsw:
> Add support for fixed-link PHY") added initial fixed-link PHY support
> for CPSW, but missed a few considerations.
> 
> This series is based on the tip of the net tree. The first two patches
> fix user-visible errors in different hardware configurations. The third
> patch is for an internal reference counting issue. They are logically
> independent changes, but in the same function, so must be applied in
> order to apply cleanly.
> 
> The first patch was originally submitted by Pascal Speck on December 4,
> but was not picked up by patchwork. I suspect that is because the patch
> was mangled by the mailer. I fixed the mangling and am including it in
> this series, as I believe it is the correct change.
> 
> I have tested on the following hardware configurations:
>  - (EVMSK) dual emac with two real MDIO-connected phys using RGMII-TXID
>  - single emac with fixed-link using RGMII
> Testing of other CPSW emac configurations that folks may have would
> be appreciated.

Series applied, thanks David.