From: Pavel Machek <pavel@ucw.cz>
To: pali.rohar@gmail.com, sre@kernel.org,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
patrikbachan@gmail.com, serge@hallyn.com
Subject: N900 sleep mode (in 4.5-rc0, if that matters)
Date: Sat, 23 Jan 2016 13:10:22 +0100 [thread overview]
Message-ID: <20160123121022.GB12497@amd> (raw)
Hi!
I enabled the sleep leds, and am using following script to set the
machine up for power management:
#!/bin/bash
uarts=$(find /sys/class/tty/ttyO*/device/power/ -type d)
for uart in $uarts; do
echo 3000 > $uart/autosuspend_delay_ms
done
uarts=$(find /sys/class/tty/ttyO*/power/ -type d)
for uart in $uarts; do
echo enabled > $uart/wakeup
echo auto > $uart/control
done
sudo mount /dev/zero -t debugfs /sys/kernel/debug/
echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode
So far, the LEDs stubbornly stay on :-(. Machine is booted off
sd-card, and I'm connected to it over wifi. GSM is active, X is
running.
Normally, ping looks like this:
64 bytes from 192.168.43.15: icmp_seq=371 ttl=64 time=2.18 ms
64 bytes from 192.168.43.15: icmp_seq=372 ttl=64 time=2.21 ms
64 bytes from 192.168.43.15: icmp_seq=373 ttl=64 time=2.94 ms
When I enable the off mode:
echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode
Wifi is no longer happy:
64 bytes from 192.168.43.15: icmp_seq=426 ttl=64 time=351 ms
64 bytes from 192.168.43.15: icmp_seq=427 ttl=64 time=178 ms
64 bytes from 192.168.43.15: icmp_seq=428 ttl=64 time=2.36 ms
and touchscreen stops working:
[99480.564910] tsc2005 spi1.0: TSC200X not responding - resetting
[99486.995758] bq27xxx-battery 2-0055: battery is not calibrated!
ignoring capacity values
[99488.564147] tsc2005 spi1.0: TSC200X not responding - resetting
[99495.550018] bq27xxx-battery 2-0055: battery is not calibrated!
ignoring capacity values
[99496.564208] tsc2005 spi1.0: TSC200X not responding - resetting
[99504.129852] bq27xxx-battery 2-0055: battery is not calibrated!
ignoring capacity values
[99504.564208] tsc2005 spi1.0: TSC200X not responding - resetting
echo 0 > /sys/kernel/debug/pm_debug/enable_off_mode
Fixes both wifi and touchscreen. Is off_mode expected to break
touchscreen? Any ideas what needs to be shut down so that the sleep
leds go off?
Power consumption seems to be in 500mA range, regardless of
off_mode. That would mean about 2 hours of battery life, AFAICT.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2016-01-23 12:10 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-23 12:10 Pavel Machek [this message]
2016-01-25 16:33 ` N900 sleep mode (in 4.5-rc0, if that matters) Tony Lindgren
2016-01-25 22:23 ` Pavel Machek
2016-01-25 22:50 ` Tony Lindgren
2016-01-26 14:00 ` Pavel Machek
2016-01-26 17:25 ` Tony Lindgren
2016-01-26 22:51 ` Tony Lindgren
2016-01-30 20:02 ` Pavel Machek
2016-01-30 20:14 ` Pavel Machek
2016-01-30 22:15 ` Pavel Machek
2016-02-01 18:13 ` Tony Lindgren
2016-02-01 21:17 ` Pavel Machek
2016-02-01 22:11 ` Tony Lindgren
2016-02-04 5:35 ` Tony Lindgren
2016-02-07 21:37 ` Pavel Machek
2016-02-08 8:51 ` Pali Rohár
2016-02-07 21:23 ` Pavel Machek
2016-02-09 17:24 ` Tony Lindgren
2016-02-09 17:38 ` Tony Lindgren
2016-03-20 8:38 ` Pavel Machek
2016-02-11 1:08 ` Tony Lindgren
2016-03-23 14:37 ` Pavel Machek
2016-03-20 8:33 ` Pavel Machek
2016-03-23 12:38 ` Pavel Machek
2016-03-30 19:12 ` Tony Lindgren
2016-04-04 11:09 ` Pali Rohár
2016-04-04 22:31 ` Tony Lindgren
2016-04-04 21:30 ` Pavel Machek
2016-04-04 22:07 ` Tony Lindgren
2016-04-05 10:09 ` Pavel Machek
2016-04-05 13:17 ` Pavel Machek
2016-04-05 14:22 ` 4.4: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode) Pavel Machek
2016-04-05 15:29 ` Tony Lindgren
2016-04-05 20:51 ` Pavel Machek
2016-04-07 17:40 ` Tony Lindgren
2016-04-07 19:48 ` 4.4, 4.6: " Pavel Machek
2016-04-07 21:32 ` Tony Lindgren
2016-04-07 23:01 ` Pavel Machek
2016-04-07 23:41 ` Tony Lindgren
2016-04-08 9:19 ` Pavel Machek
2016-04-11 8:27 ` 4.6-rc2: regression with omap video and lockdep (was Re: 4.4, 4.6: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode)) Pavel Machek
2016-04-11 9:30 ` 4.4, 4.6: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode) Pavel Machek
2016-04-11 9:41 ` Pavel Machek
2016-04-11 21:10 ` Tony Lindgren
2016-04-12 12:16 ` Nokia N900 retention mode in v4.6, camera buttons fun Pavel Machek
2016-04-12 12:30 ` Pavel Machek
2016-04-12 16:30 ` Tony Lindgren
2016-04-13 5:52 ` Tomi Valkeinen
2016-04-13 15:15 ` Tony Lindgren
2016-04-17 17:55 ` Pavel Machek
2016-04-18 23:47 ` Tony Lindgren
2016-04-21 13:04 ` Pali Rohár
2016-04-21 21:28 ` Pavel Machek
2016-04-22 7:05 ` Pali Rohár
2016-04-29 20:06 ` Sebastian Reichel
2016-05-01 8:52 ` Pavel Machek
2016-05-01 15:48 ` Sebastian Reichel
2016-05-02 20:12 ` Sebastian Reichel
2016-05-28 11:09 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160123121022.GB12497@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=patrikbachan@gmail.com \
--cc=serge@hallyn.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).