From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: N900 sleep mode (in 4.5-rc0, if that matters) Date: Sat, 30 Jan 2016 21:02:45 +0100 Message-ID: <20160130200244.GA30429@amd> References: <20160123121022.GB12497@amd> <20160125163332.GT19432@atomide.com> <20160126140010.GA29723@amd> <20160126172527.GY3500@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20160126172527.GY3500@atomide.com> Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren Cc: pali.rohar@gmail.com, sre@kernel.org, kernel list , linux-arm-kernel , linux-omap@vger.kernel.org, khilman@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com, serge@hallyn.com List-Id: linux-omap@vger.kernel.org Hi! > > ffdffe8d 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200072 > > 0000000d 48004a28 (fa004a28) cm_idlest3_core > > > > cm_idlest1_core changes periodicall often, to 00218072. The rest seems > > constant. > > For cm_idlest1_core 42 is the answer.. Here you have bits 4 and 5 > blocking which is for OTG and it's PHY. That's a known issue with > musb and setting pm_runtime_irq_safe() on the MUSB parent. > > If you do rmmod omap2430 and phy-twl4030usb chances are the LEDs will > start going off assuming the McSPI bit goes low with WLAN idling. Ok, so I tried to compile kernel without omap2430/phy-twl4030usb . That did not help. So I thought, ok, maybe rmmod is needed to trigger some powersaving? But that is not exactly easy to do: pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko pavel@n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko Error: Module phy_twl4030_usb is in use pavel@n900:/my/tui/ofone$ Any ideas what jumps to use the modules? Charger code? Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html