From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: N900 sleep mode (in 4.5-rc0, if that matters) Date: Sun, 7 Feb 2016 22:23:16 +0100 Message-ID: <20160207212316.GA6147@amd> References: <20160123121022.GB12497@amd> <20160125163332.GT19432@atomide.com> <20160126140010.GA29723@amd> <20160126172527.GY3500@atomide.com> <20160130200244.GA30429@amd> <20160130201452.GC30429@amd> <20160130221509.GA28644@amd> <20160201181316.GM19432@atomide.com> <20160201211736.GA11283@amd> <20160201221111.GP19432@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20160201221111.GP19432@atomide.com> Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren Cc: pali.rohar@gmail.com, sre@kernel.org, kernel list , linux-arm-kernel , linux-omap@vger.kernel.org, khilman@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com, serge@hallyn.com List-Id: linux-omap@vger.kernel.org Hi! > > (I assume I have to insmod and rmmod, right? Because powersave is not > > entered if I simply compile-out usb). > > Depending on what the bootloader does and probably also if > USB was used during the booting.. So yeah you may need to modprobe > and then rmmod. > > > Would you have commit ids for those rmmod fixes? It might be good to > > push them into stable, and I should try again with them applied... > > 055555fc459 ("usb: musb: core: Fix handling of the phy notifications") > 03e43528ab68 ("usb: musb: Fix unbalanced pm_runtime_enable") Ok, with that, I can insmod and rmmod. But I still get: 00001fff 48005020 (fa005020) cm_idlest_per blocking bits: 0007e000 ffdffebd 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200042 0000000d 48004a28 (fa004a28) cm_idlest3_core Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html