From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz Date: Tue, 26 Apr 2016 10:52:41 -0700 Message-ID: <20160426175241.GL5995@atomide.com> References: <1461151980-28139-1-git-send-email-vigneshr@ti.com> <1461151980-28139-3-git-send-email-vigneshr@ti.com> <20160422193353.GA15316@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20160422193353.GA15316@rob-hp-laptop> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring Cc: Vignesh R , nsekhar-l0cyMroinI0@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-omap@vger.kernel.org * Rob Herring [160422 12:35]: > On Wed, Apr 20, 2016 at 05:03:00PM +0530, Vignesh R wrote: > > According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on > > DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas > > MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better > > throughput. > > > > Signed-off-by: Vignesh R > > --- > > > > v2: rebased on linux-next 20160419 to include moving to > > dra72-evm-common.dtsi > > > > > > Documentation/devicetree/bindings/spi/ti_qspi.txt | 7 +++++++ > > arch/arm/boot/dts/dra7-evm.dts | 6 ++---- > > arch/arm/boot/dts/dra72-evm-common.dtsi | 6 ++---- > > 3 files changed, 11 insertions(+), 8 deletions(-) > > Acked-by: Rob Herring Applying both into omap-for-v4.7/dt thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html