From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrea Gelmini Subject: [PATCH 0108/1529] Fix typo Date: Sat, 21 May 2016 13:50:32 +0200 Message-ID: <20160521115032.4966-1-andrea.gelmini@gelma.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: andrea.gelmini@gelma.net Cc: tony@atomide.com, linux-omap@vger.kernel.org, trivial@kernel.org, linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org List-Id: linux-omap@vger.kernel.org Signed-off-by: Andrea Gelmini --- arch/arm/mach-omap2/sdrc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 645a2a4..f115006 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); * don't adjust it down as your clock period increases the refresh interval * will not be met. Setting all parameters for complete worst case may work, * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists across production samples. * * Only the FULL speed values are given. Current code is such that rate * changes must be made at DPLLoutx2. The actual value adjustment for low -- 2.8.2.534.g1f66975