From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: outdated documentation for lp5523 LED driver? Date: Fri, 15 Jul 2016 10:54:25 +0200 Message-ID: <20160715085425.GA21257@amd> References: <20160715073214.GC13429@amd> <20160715074052.GE29844@pali> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <20160715074052.GE29844@pali> Sender: linux-kernel-owner@vger.kernel.org To: Pali =?iso-8859-1?Q?Roh=E1r?= Cc: sre@kernel.org, kernel list , linux-arm-kernel , linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com, serge@hallyn.com, samu.p.onkalo@nokia.com, milo.kim@ti.com, toshik@chromium.org, j.anaszewski@samsung.com, cooloney@gmail.com List-Id: linux-omap@vger.kernel.org On Fri 2016-07-15 09:40:52, Pali Roh=E1r wrote: > On Friday 15 July 2016 09:32:14 Pavel Machek wrote: > > Hi! > >=20 > > Documentation says that load/leds are only visible in the load mode= , > > but that does not seem to be true (kernel 4.4.0 on N900). > >=20 > > # 1) Legacy interface - enginex_mode, enginex_load and enginex_leds > > # Control interface for the engines: > > # x is 1 .. 3 > > # enginex_mode : disabled, load, run > > # enginex_load : microcode load (visible only in load mode) > > # enginex_leds : led mux control (visible only in load mode) > >=20 > > pavel@n900:/sys/class/leds/lp5523:r/device$ ls -al engine* > > -rw-r--r-- 1 root root 4096 Jul 6 22:47 engine1_leds > > --w------- 1 root root 4096 Jul 6 22:47 engine1_load > > -rw-r--r-- 1 root root 4096 Jul 6 23:41 engine1_mode > > -rw-r--r-- 1 root root 4096 Jul 6 22:47 engine2_leds > > --w------- 1 root root 4096 Jul 6 22:47 engine2_load > > -rw-r--r-- 1 root root 4096 Jul 6 23:41 engine2_mode > > -rw-r--r-- 1 root root 4096 Jul 6 22:47 engine3_leds > > --w------- 1 root root 4096 Jul 6 22:47 engine3_load > > -rw-r--r-- 1 root root 4096 Jul 6 22:47 engine3_mode > > pavel@n900:/sys/class/leds/lp5523:r/device$ grep . engine*mode > > engine1_mode:run > > engine2_mode:load > > engine3_mode:run > > pavel@n900:/sys/class/leds/lp5523:r/device$ >=20 > On 2.6.28 kernel is present only legacy interface and for this versio= n > is above documentation correct. When engine is in "run" or "disabled"= , > then sysfs nodes _load and _leds are invisible. Well, I don't think 2.6.28 is suitable kernel to compare against... and I don't think hiding sysfs attributes makes any sense. Pavel --=20 (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses= /blog.html