linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org,
	tony@atomide.com, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/7] mfd: Fix all W=1 warnings
Date: Wed, 26 Oct 2016 13:27:10 +0100	[thread overview]
Message-ID: <20161026122710.GZ8574@dell> (raw)
In-Reply-To: <5506538.euWBouSNJd@wuerfel>

On Thu, 15 Sep 2016, Arnd Bergmann wrote:

> On Thursday, September 15, 2016 11:45:14 AM CEST Lee Jones wrote:
> > It really is as simple as it sounds!
> > 
> 
> I seem to have one that you didn't find.

Applied, thanks.

> 8<--------
> From 6c63171eba728fc6d8bc6358884deaccd4cee33d Mon Sep 17 00:00:00 2001
> From: Arnd Bergmann <arnd@arndb.de>
> Date: Thu, 4 Aug 2016 15:28:51 +0200
> Subject: [PATCH] mfd: tps65912: move regmap config into core driver
> 
> When building with extra warnings enabled, most files including
> linux/mfd/tps65912.h warn about a static variable defined in the
> header:
> 
> include/linux/mfd/tps65912.h:331:35: warning: 'tps65912_regmap_config' defined but not used [-Wunused-const-variable=]
> 
> We also duplicate the data structure between the i2c and spi front-end
> drivers. Moving it into the driver code avoids the warning and
> the duplication.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
> index a88cfa80dbc4..f33567bc428d 100644
> --- a/drivers/mfd/tps65912-core.c
> +++ b/drivers/mfd/tps65912-core.c
> @@ -77,6 +77,23 @@ static struct regmap_irq_chip tps65912_irq_chip = {
>  	.init_ack_masked = true,
>  };
>  
> +static const struct regmap_range tps65912_yes_ranges[] = {
> +	regmap_reg_range(TPS65912_INT_STS, TPS65912_GPIO5),
> +};
> +
> +static const struct regmap_access_table tps65912_volatile_table = {
> +	.yes_ranges = tps65912_yes_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(tps65912_yes_ranges),
> +};
> +
> +const struct regmap_config tps65912_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,
> +	.volatile_table = &tps65912_volatile_table,
> +};
> +EXPORT_SYMBOL_GPL(tps65912_regmap_config);
> +
>  int tps65912_device_init(struct tps65912 *tps)
>  {
>  	int ret;
> diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h
> index 1a603701550e..b25d0297ba88 100644
> --- a/include/linux/mfd/tps65912.h
> +++ b/include/linux/mfd/tps65912.h
> @@ -319,21 +319,7 @@ struct tps65912 {
>  	struct regmap_irq_chip_data *irq_data;
>  };
>  
> -static const struct regmap_range tps65912_yes_ranges[] = {
> -	regmap_reg_range(TPS65912_INT_STS, TPS65912_GPIO5),
> -};
> -
> -static const struct regmap_access_table tps65912_volatile_table = {
> -	.yes_ranges = tps65912_yes_ranges,
> -	.n_yes_ranges = ARRAY_SIZE(tps65912_yes_ranges),
> -};
> -
> -static const struct regmap_config tps65912_regmap_config = {
> -	.reg_bits = 8,
> -	.val_bits = 8,
> -	.cache_type = REGCACHE_RBTREE,
> -	.volatile_table = &tps65912_volatile_table,
> -};
> +extern const struct regmap_config tps65912_regmap_config;
>  
>  int tps65912_device_init(struct tps65912 *tps);
>  int tps65912_device_exit(struct tps65912 *tps);
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2016-10-26 12:27 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-15 10:45 [PATCH 0/7] mfd: Fix all W=1 warnings Lee Jones
2016-09-15 10:45 ` [PATCH 1/7] mfd: max8997-irq: 'inline' should be at the beginning of the declaration Lee Jones
2016-09-15 11:28   ` Arnd Bergmann
2016-09-15 10:45 ` [PATCH 2/7] mfd: ab8500-debugfs: Prevent initialised field from being over-written Lee Jones
2016-09-15 11:31   ` Arnd Bergmann
2016-09-15 10:45 ` [PATCH 3/7] mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls Lee Jones
2016-10-06 20:35   ` Ulf Hansson
2016-09-15 10:45 ` [PATCH 4/7] mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() Lee Jones
2016-09-15 10:45 ` [PATCH 5/7] mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() Lee Jones
2016-09-15 10:45 ` [PATCH 6/7] mfd: omap-usb-host: Return value is not 'const int' Lee Jones
2016-09-15 11:33   ` Arnd Bergmann
2016-09-15 10:45 ` [PATCH 7/7] mfd: cros_ec_spi: Remove unused variable 'request' Lee Jones
2016-09-15 11:35 ` [PATCH 0/7] mfd: Fix all W=1 warnings Arnd Bergmann
2016-10-26 12:27   ` Lee Jones [this message]
2016-09-15 12:44 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161026122710.GZ8574@dell \
    --to=lee.jones@linaro.org \
    --cc=arnd@arndb.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).