From: Lee Jones <lee.jones@linaro.org>
To: Milo Kim <woogyom.kim@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/5] mfd: tps65217: Update register interrupt mask bits instead of writing operation
Date: Tue, 22 Nov 2016 15:46:51 +0000 [thread overview]
Message-ID: <20161122154651.GC10134@dell.home> (raw)
In-Reply-To: <20161115130215.3301-4-woogyom.kim@gmail.com>
On Tue, 15 Nov 2016, Milo Kim wrote:
> TPS65217 interrupt register includes read/writeable mask bits with
> read-only status bits. (bit 4, 5, 6 are R/W, bit 0, 1, 2 are RO)
> And reserved bit is not required.
>
> Register update operation is preferred for disabling all interrupts during
> the device initialisation.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> ---
> drivers/mfd/tps65217.c | 7 +++----
> include/linux/mfd/tps65217.h | 3 ++-
> 2 files changed, 5 insertions(+), 5 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
> index 77fb812..9d76de9 100644
> --- a/drivers/mfd/tps65217.c
> +++ b/drivers/mfd/tps65217.c
> @@ -189,10 +189,9 @@ static int tps65217_irq_init(struct tps65217 *tps, int irq)
> tps->irq = irq;
>
> /* Mask all interrupt sources */
> - tps->irq_mask = (TPS65217_INT_RESERVEDM | TPS65217_INT_PBM
> - | TPS65217_INT_ACM | TPS65217_INT_USBM);
> - tps65217_reg_write(tps, TPS65217_REG_INT, tps->irq_mask,
> - TPS65217_PROTECT_NONE);
> + tps->irq_mask = TPS65217_INT_MASK;
> + tps65217_set_bits(tps, TPS65217_REG_INT, TPS65217_INT_MASK,
> + TPS65217_INT_MASK, TPS65217_PROTECT_NONE);
>
> tps->irq_domain = irq_domain_add_linear(tps->dev->of_node,
> TPS65217_NUM_IRQ, &tps65217_irq_domain_ops, tps);
> diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
> index 3cbec4b..35d8d64 100644
> --- a/include/linux/mfd/tps65217.h
> +++ b/include/linux/mfd/tps65217.h
> @@ -73,13 +73,14 @@
> #define TPS65217_PPATH_AC_CURRENT_MASK 0x0C
> #define TPS65217_PPATH_USB_CURRENT_MASK 0x03
>
> -#define TPS65217_INT_RESERVEDM BIT(7)
> #define TPS65217_INT_PBM BIT(6)
> #define TPS65217_INT_ACM BIT(5)
> #define TPS65217_INT_USBM BIT(4)
> #define TPS65217_INT_PBI BIT(2)
> #define TPS65217_INT_ACI BIT(1)
> #define TPS65217_INT_USBI BIT(0)
> +#define TPS65217_INT_MASK (TPS65217_INT_PBM | TPS65217_INT_ACM | \
> + TPS65217_INT_USBM)
>
> #define TPS65217_CHGCONFIG0_TREG BIT(7)
> #define TPS65217_CHGCONFIG0_DPPM BIT(6)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-11-22 15:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-15 13:02 [PATCH 0/5] mfd: tps65217: Improve the IRQ domain feature Milo Kim
2016-11-15 13:02 ` [PATCH 1/5] mfd: tps65217: Fix page fault on unloading modules Milo Kim
2016-11-22 15:39 ` Lee Jones
2016-11-15 13:02 ` [PATCH 2/5] mfd: tps65217: Specify the IRQ name Milo Kim
2016-11-22 15:45 ` Lee Jones
2016-11-15 13:02 ` [PATCH 3/5] mfd: tps65217: Update register interrupt mask bits instead of writing operation Milo Kim
2016-11-22 15:46 ` Lee Jones [this message]
2016-11-15 13:02 ` [PATCH 4/5] mfd: tps65217: Make an interrupt handler simpler Milo Kim
2016-11-22 15:48 ` Lee Jones
2016-11-15 13:02 ` [PATCH 5/5] mfd: tps65217: Support an interrupt pin as the system wakeup Milo Kim
2016-11-22 15:49 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161122154651.GC10134@dell.home \
--to=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
--cc=woogyom.kim@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).