Re: [PATCH] usb: dwc3: omap: Fix imprecise external abort and oops on boot

[Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>]

* Felipe Balbi <balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [161208 01:45]:
> 
> Hi,
> 
> Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> writes:
> > Somehow starting with v4.9-rc7 there have been imprecise
> 
> There's nothing touching dwc3 since v4.9-rc5.

Right, nothing obvious has changed. I think it's just a slight timing
change in the code that started triggering it.

> > external aborts on omap5-uevm dwc3 controller. I have not been
> > able to bisect what exactly triggered this as it does not always
> > happen. It seems that something changed with probing that
> > now exposes the issue:
> >
> > Unhandled fault: imprecise external abort (0x1406) at 0x00000000
> 
> hmmm, clock disabled... dwc3-omap shouldn't have pm runtime at all.

It does for the interconnect target module clkctrl register via PM
runtime. That's the "usb_otg_ss" module.

> > ...
> > PC is at dwc3_omap_interrupt_thread+0x20/0x80
> > LR is at irq_thread_fn+0x1c/0x54
> > ...
> > [<c0989fa8>] (dwc3_omap_interrupt_thread) from [<c038a4d8>]
> > (irq_thread_fn+0x1c/0x54)
> > [<c038a4d8>] (irq_thread_fn) from [<c038a7b0>] (irq_thread+0x12c/0x1f0)
> > [<c038a7b0>] (irq_thread) from [<c035d6f0>] (kthread+0xdc/0xf4)
> > [<c035d6f0>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
> > ...
> >
> > Unable to handle kernel paging request at virtual address ffffffec
> > ...
> > Internal error: Oops: 37 [#2] SMP ARM
> > PC is at kthread_data+0x4/0xc
> > LR is at irq_thread_dtor+0x28/0xd0
> > ...
> > [<c035e0b4>] (kthread_data) from [<c038a5dc>] (irq_thread_dtor+0x28/0xd0)
> > [<c038a5dc>] (irq_thread_dtor) from [<c035bef0>] (task_work_run+0xb8/0xdc)
> > [<c035bef0>] (task_work_run) from [<c03448d4>] (do_exit+0x314/0xa20)
> > [<c03448d4>] (do_exit) from [<c030bea8>] (die+0x410/0x474)
> > [<c030bea8>] (die) from [<c0301350>] (do_DataAbort+0xb4/0xb8)
> > [<c0301350>] (do_DataAbort) from [<c030c578>] (__dabt_svc+0x58/0x80)
> > Exception stack(0xee777ec8 to 0xee777f10)
> > 7ec0:                   0000014d ee6e6f10 00000034 fc020034 ee6e6f10 ee1eec00
> > 7ee0: 00000000 00000000 ee6ec640 c038a4bc 00000000 00000000 00000000 ee777f18
> > 7f00: c038a4d8 c0989fa8 60000013 ffffffff
> > [<c030c578>] (__dabt_svc) from [<c0989fa8>] (dwc3_omap_interrupt_thread+0x20/0x80)
> > [<c0989fa8>] (dwc3_omap_interrupt_thread) from [<c038a4d8>] (irq_thread_fn+0x1c/0x54)
> > [<c038a4d8>] (irq_thread_fn) from [<c038a7b0>] (irq_thread+0x12c/0x1f0)
> > [<c038a7b0>] (irq_thread) from [<c035d6f0>] (kthread+0xdc/0xf4)
> > [<c035d6f0>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
> >
> > Fix the issue by making sure the dwc3 interrupts are disabled
> > before we call devm_request_threaded_irq().
> 
> that should already be the case. Are you sure that register isn't zero
> in probe?

Looks like irq0_status = 0 and irqmisc_status = 0x2121. Also just
clearing irqmisc with dwc3_omap_write_irqmisc_clr(omap, 0xffffffff)
stops the issue from happening.

There is some deferred probing happening but irqmisc is always 0x2121.

Regards,

Tony

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html