From: Lukasz Majewski <l.majewski@majess.pl>
To: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Problem with early debugging (arch/arm/boot/compressed/head.S)
Date: Fri, 16 Dec 2016 07:34:48 +0100 [thread overview]
Message-ID: <20161216073448.1da2d374@jawa> (raw)
[-- Attachment #1: Type: text/plain, Size: 3253 bytes --]
Dear All,
My SoC: Cortex-A15, TI (AM57xx)
My setup: Linux v4.9: tag v4.9-rc8
Toolchain: TI's SDK:
ti-am572x-idk-sdk/linux-devkit/sysroots/x86_64-arago-linux/usr/bin/arm-linux-gnueabihf-
I'm trying to get early print messages on UART1 (0x4806a000).
Relevant .config defines:
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/omap2plus.S"
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_OMAP2UART1=y
've enabled debugging in the arch/arm/boot/compressed/head.S file (#define DEBUG).
Unfortunately I do have following errors:
CC arch/arm/boot/compressed/decompress.o
arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `sub ,r3,r1'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `ldr r3,[,#0]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `ldr r1,[,#4]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `str r3,[,#0]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `str r3,[,#4]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `str r3,[,#8]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `str r3,[,#0]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `str r3,[,#4]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `str r3,[,#8]'
arch/arm/boot/compressed/head.S:1286: Error: ARM register expected -- `ldr ,[,#8]'
arch/arm/boot/compressed/head.S:1286: Error: shift expression expected -- `add r3,r3,'
arch/arm/boot/compressed/head.S:1286: Error: shift expression expected -- `add r1,r1,'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `sub ,r3,r1'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `ldr r3,[,#0]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `ldr r1,[,#4]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `str r3,[,#0]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `str r3,[,#4]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `str r3,[,#8]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `str r3,[,#0]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `str r3,[,#4]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `str r3,[,#8]'
arch/arm/boot/compressed/head.S:1304: Error: ARM register expected -- `ldr ,[,#8]'
arch/arm/boot/compressed/head.S:1304: Error: shift expression expected -- `add r3,r3,'
arch/arm/boot/compressed/head.S:1304: Error: shift expression expected -- `add r1,r1,'
scripts/Makefile.build:393: recipe for target 'arch/arm/boot/compressed/head.o' failed
Those are related to loadsp macro (also defined in head.S file), which
is very short:
.macro loadsp, rb, tmp
push {r7}
addruart r7, \rb, \tmp
pop {r7}
.endm
Any ideas how to fix this issue? Any hints?
I initially thought that this is compiler configuration issue - but
those errors are on many compilers (also incliding TI's SDK compiler).
Any ideas or hints how to proceed?
Best regards,
Łukasz Majewski
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
reply other threads:[~2016-12-16 6:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161216073448.1da2d374@jawa \
--to=l.majewski@majess.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).