Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org, Mugunthan V N <mugunthanvnm@ti.com>,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Sekhar Nori <nsekhar@ti.com>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH v2 0/7] net: ethernet: ti: cpsw: support placing CPDMA descriptors into DDR
Date: Fri, 6 Jan 2017 14:07:28 -0600	[thread overview]
Message-ID: <20170106200735.4210-1-grygorii.strashko@ti.com> (raw)

This series intended to add support for placing CPDMA descriptors into DDR by
introducing new module parameter "descs_pool_size" to specify size of descriptor's
pool. The "descs_pool_size" defines total number of CPDMA
CPPI descriptors to be used for both ingress/egress packets
processing. If not specified - the default value 256 will be used
which will allow to place descriptor's pool into the internal CPPI
RAM.

In addition, added ability to re-split CPDMA pool of descriptors between RX and TX
path via ethtool '-G' command wich will allow to configure and fix number
of descriptors used by RX and TX path, which, then, will be split between
RX/TX channels proportionally depending on number of RX/TX channels and
its weight. 

This allows significantly to reduce UDP packets drop rate
for bandwidth >301 Mbits/sec (am57x).  

Before enabling this feature, the am437x SoC has to be fixed as it's proved
that it's not working when CPDMA descriptors placed in DDR.
So, the patch 1 fixes this issue.

Grygorii Strashko (7):
  net: ethernet: ti: cpdma: am437x: allow descs to be plased in ddr
  net: ethernet: ti: cpdma: fix desc re-queuing
  net: ethernet: ti: cpdma: minimize number of parameters in
    cpdma_desc_pool_create/destroy()
  net: ethernet: ti: cpdma: use devm_ioremap
  net: ethernet: ti: cpsw: add support for descs pool size configuration
  net: ethernet: ti: cpsw: add support for ringparam configuration
  Documentation: DT: net: cpsw: remove no_bd_ram property

 Documentation/devicetree/bindings/net/cpsw.txt |   3 -
 arch/arm/boot/dts/am33xx.dtsi                  |   1 -
 arch/arm/boot/dts/am4372.dtsi                  |   1 -
 arch/arm/boot/dts/dm814x.dtsi                  |   1 -
 arch/arm/boot/dts/dra7.dtsi                    |   1 -
 drivers/net/ethernet/ti/cpsw.c                 |  98 ++++++++++++++-
 drivers/net/ethernet/ti/davinci_cpdma.c        | 161 +++++++++++++++----------
 drivers/net/ethernet/ti/davinci_cpdma.h        |   5 +
 8 files changed, 199 insertions(+), 72 deletions(-)

-- 
2.10.1.dirty

             reply	other threads:[~2017-01-06 20:07 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-06 20:07 Grygorii Strashko [this message]
2017-01-06 20:07 ` [PATCH v2 1/7] net: ethernet: ti: cpdma: am437x: allow descs to be plased in ddr Grygorii Strashko
2017-01-06 20:07 ` [PATCH v2 2/7] net: ethernet: ti: cpdma: fix desc re-queuing Grygorii Strashko
2017-01-06 20:07 ` [PATCH v2 3/7] net: ethernet: ti: cpdma: minimize number of parameters in cpdma_desc_pool_create/destroy() Grygorii Strashko
2017-01-06 20:07 ` [PATCH v2 4/7] net: ethernet: ti: cpdma: use devm_ioremap Grygorii Strashko
2017-01-06 20:07 ` [PATCH v2 5/7] net: ethernet: ti: cpsw: add support for descs pool size configuration Grygorii Strashko
2017-01-06 20:07 ` [PATCH v2 6/7] net: ethernet: ti: cpsw: add support for ringparam configuration Grygorii Strashko
2017-01-06 20:07 ` [PATCH v2 7/7] Documentation: DT: net: cpsw: remove no_bd_ram property Grygorii Strashko
2017-01-08  1:48 ` [PATCH v2 0/7] net: ethernet: ti: cpsw: support placing CPDMA descriptors into DDR David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170106200735.4210-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=davem@davemloft.net \
    --cc=ivan.khoronzhuk@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox