From: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
To: b-liu-l0cyMroinI0@public.gmane.org
Cc: nsekhar-l0cyMroinI0@public.gmane.org,
khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
ptitiano-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org,
Alexandre Bailon
<abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v4 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
Date: Tue, 24 Jan 2017 11:11:47 +0100 [thread overview]
Message-ID: <20170124101149.14920-4-abailon@baylibre.com> (raw)
In-Reply-To: <20170124101149.14920-1-abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Currently, only the PIO mode is supported.
This add support of CPPI 4.1 to DA8xx.
As the In DA8xx the CPPI 4.1 DMA is a part of the USB.
Create the CPPI 4.1 device as a child of USB.
Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
drivers/usb/musb/Kconfig | 4 ++--
drivers/usb/musb/da8xx.c | 35 ++++++++++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 72a2a50..5506a9c 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -160,8 +160,8 @@ config USB_TI_CPPI_DMA
Enable DMA transfers when TI CPPI DMA is available.
config USB_TI_CPPI41_DMA
- bool 'TI CPPI 4.1 (AM335x)'
- depends on ARCH_OMAP && DMADEVICES
+ bool 'TI CPPI 4.1'
+ depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
select TI_CPPI41
config USB_TUSB_OMAP_DMA
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index cd3d763..d279438 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -33,6 +33,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -457,12 +458,40 @@ static inline u8 get_vbus_power(struct device *dev)
return current_uA / 1000 / 2;
}
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+static void da8xx_dma_controller_callback(struct dma_controller *c)
+{
+ struct musb *musb = c->musb;
+ void __iomem *reg_base = musb->ctrl_base;
+
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+static struct dma_controller *
+da8xx_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+ struct dma_controller *controller;
+
+ controller = cppi41_dma_controller_create(musb, base);
+ if (IS_ERR_OR_NULL(controller))
+ return controller;
+
+ controller->dma_callback = da8xx_dma_controller_callback;
+
+ return controller;
+}
+#endif
+
static const struct musb_platform_ops da8xx_ops = {
- .quirks = MUSB_INDEXED_EP,
+ .quirks = MUSB_INDEXED_EP | MUSB_DMA_CPPI41,
.init = da8xx_musb_init,
.exit = da8xx_musb_exit,
.fifo_mode = 2,
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+ .dma_init = da8xx_dma_controller_create,
+ .dma_exit = cppi41_dma_controller_destroy,
+#endif
.enable = da8xx_musb_enable,
.disable = da8xx_musb_disable,
@@ -534,6 +563,10 @@ static int da8xx_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, glue);
+ ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ if (ret)
+ return ret;
+
memset(musb_resources, 0x00, sizeof(*musb_resources) *
ARRAY_SIZE(musb_resources));
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-24 10:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 10:11 [PATCH v4 0/5] usb: musb: da8xx: Add DMA support Alexandre Bailon
[not found] ` <20170124101149.14920-1-abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-24 10:11 ` [PATCH v4 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods Alexandre Bailon
2017-01-24 10:11 ` [PATCH v4 2/5] usb: musb: Use shared irq Alexandre Bailon
2017-01-24 10:11 ` Alexandre Bailon [this message]
2017-01-24 10:11 ` [PATCH v4 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown Alexandre Bailon
[not found] ` <20170124101149.14920-5-abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-24 12:22 ` Sergei Shtylyov
2017-01-24 10:11 ` [PATCH v4 5/5] usb: musb: da8xx: Add a primary support of PM runtime Alexandre Bailon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170124101149.14920-4-abailon@baylibre.com \
--to=abailon-rdvid1duhrbwk0htik3j/w@public.gmane.org \
--cc=b-liu-l0cyMroinI0@public.gmane.org \
--cc=khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=ptitiano-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).