[PATCH 0/4] Make ohci-platform usable for omap3/4/5

[PATCH 0/4] Make ohci-platform usable for omap3/4/5

[Tony Lindgren]

Hi all,

Here are patches I promised several months ago so we can eventually
get rid of ohci-omap3 in favor of ohci-platform as suggested by
Alan Stern.

I think we need to wait a while before removing ohci-omap3, so
I just added a warning for now to urge people to move to use
ohci-platform instead.

Regards,

Tony

Tony Lindgren (4):
  usb: host: ohci-platform: Add basic runtime PM support
  usb: host: ohci-platform: Add support for omap3 and later
  usb: host: ohci-omap3: Print warning to get people to use
    ohci-platform
  ARM: dts: Add remote-wakeup-connected for omap OHCI

 Documentation/devicetree/bindings/usb/usb-ohci.txt |  1 +
 arch/arm/boot/dts/omap3.dtsi                       |  1 +
 arch/arm/boot/dts/omap4.dtsi                       |  1 +
 arch/arm/boot/dts/omap5.dtsi                       |  1 +
 drivers/usb/host/ohci-omap3.c                      |  3 +++
 drivers/usb/host/ohci-platform.c                   | 16 ++++++++++++++++
 6 files changed, 23 insertions(+)

-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support

[Tony Lindgren]

This is needed in preparation of adding support for omap3 and
later OHCI. The runtime PM will only do something on platforms
that implement it.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/host/ohci-platform.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/usb.h>
@@ -51,6 +52,10 @@ static int ohci_platform_power_on(struct platform_device *dev)
 	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
 	int clk, ret, phy_num;
 
+	ret = pm_runtime_get_sync(&dev->dev);
+	if (ret < 0)
+		return ret;
+
 	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
 		ret = clk_prepare_enable(priv->clks[clk]);
 		if (ret)
@@ -96,6 +101,8 @@ static void ohci_platform_power_off(struct platform_device *dev)
 	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
 		if (priv->clks[clk])
 			clk_disable_unprepare(priv->clks[clk]);
+
+	pm_runtime_put_sync(&dev->dev);
 }
 
 static struct hc_driver __read_mostly ohci_platform_hc_driver;
@@ -242,6 +249,7 @@ static int ohci_platform_probe(struct platform_device *dev)
 	}
 #endif
 
+	pm_runtime_enable(&dev->dev);
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
@@ -271,6 +279,7 @@ static int ohci_platform_probe(struct platform_device *dev)
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
+	pm_runtime_disable(&dev->dev);
 	while (--rst >= 0)
 		reset_control_assert(priv->resets[rst]);
 err_put_clks:
@@ -305,6 +314,8 @@ static int ohci_platform_remove(struct platform_device *dev)
 
 	usb_put_hcd(hcd);
 
+	pm_runtime_disable(&dev->dev);
+
 	if (pdata == &ohci_platform_defaults)
 		dev->dev.platform_data = NULL;
 
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support

[Roger Quadros]

On 18/05/17 01:59, Tony Lindgren wrote:
> This is needed in preparation of adding support for omap3 and
> later OHCI. The runtime PM will only do something on platforms
> that implement it.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Acked-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>

> ---
>  drivers/usb/host/ohci-platform.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -24,6 +24,7 @@
>  #include <linux/err.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/usb/ohci_pdriver.h>
>  #include <linux/usb.h>
> @@ -51,6 +52,10 @@ static int ohci_platform_power_on(struct platform_device *dev)
>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
>  	int clk, ret, phy_num;
>  
> +	ret = pm_runtime_get_sync(&dev->dev);
> +	if (ret < 0)
> +		return ret;
> +
>  	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
>  		ret = clk_prepare_enable(priv->clks[clk]);
>  		if (ret)
> @@ -96,6 +101,8 @@ static void ohci_platform_power_off(struct platform_device *dev)
>  	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
>  		if (priv->clks[clk])
>  			clk_disable_unprepare(priv->clks[clk]);
> +
> +	pm_runtime_put_sync(&dev->dev);
>  }
>  
>  static struct hc_driver __read_mostly ohci_platform_hc_driver;
> @@ -242,6 +249,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	}
>  #endif
>  
> +	pm_runtime_enable(&dev->dev);
>  	if (pdata->power_on) {
>  		err = pdata->power_on(dev);
>  		if (err < 0)
> @@ -271,6 +279,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  err_reset:
> +	pm_runtime_disable(&dev->dev);
>  	while (--rst >= 0)
>  		reset_control_assert(priv->resets[rst]);
>  err_put_clks:
> @@ -305,6 +314,8 @@ static int ohci_platform_remove(struct platform_device *dev)
>  
>  	usb_put_hcd(hcd);
>  
> +	pm_runtime_disable(&dev->dev);
> +
>  	if (pdata == &ohci_platform_defaults)
>  		dev->dev.platform_data = NULL;
>  
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support

[Alan Stern]

On Wed, 17 May 2017, Tony Lindgren wrote:

> This is needed in preparation of adding support for omap3 and
> later OHCI. The runtime PM will only do something on platforms
> that implement it.

This patch isn't correct.  See below.

> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/usb/host/ohci-platform.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -24,6 +24,7 @@
>  #include <linux/err.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/usb/ohci_pdriver.h>
>  #include <linux/usb.h>
> @@ -51,6 +52,10 @@ static int ohci_platform_power_on(struct platform_device *dev)
>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
>  	int clk, ret, phy_num;
>  
> +	ret = pm_runtime_get_sync(&dev->dev);
> +	if (ret < 0)
> +		return ret;
> +
>  	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
>  		ret = clk_prepare_enable(priv->clks[clk]);
>  		if (ret)
> @@ -96,6 +101,8 @@ static void ohci_platform_power_off(struct platform_device *dev)
>  	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
>  		if (priv->clks[clk])
>  			clk_disable_unprepare(priv->clks[clk]);
> +
> +	pm_runtime_put_sync(&dev->dev);
>  }

ohci_platform_power_on() is invoked (by default) by the runtime-resume
callback routine ohci_platform_resume(), through the pdata->power_on
method pointer.  Likewise, ohci_platform_power_off() is invoked by the
runtime-suspend callback routine.

This means you shouldn't do pm_runtime_get/put calls from within these 
routines.

Is there any particular reason you wanted to add these calls?  In
general, USB host controllers are expected to go into runtime suspend
whenever there aren't any children keeping them awake.  Hence they
usually don't need to worry about initiating their own suspends and
resumes.

>  static struct hc_driver __read_mostly ohci_platform_hc_driver;
> @@ -242,6 +249,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	}
>  #endif
>  
> +	pm_runtime_enable(&dev->dev);

There should be a pm_runtime_set_active() just before this.

>  	if (pdata->power_on) {
>  		err = pdata->power_on(dev);
>  		if (err < 0)
> @@ -271,6 +279,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  err_reset:
> +	pm_runtime_disable(&dev->dev);
>  	while (--rst >= 0)
>  		reset_control_assert(priv->resets[rst]);
>  err_put_clks:
> @@ -305,6 +314,8 @@ static int ohci_platform_remove(struct platform_device *dev)
>  
>  	usb_put_hcd(hcd);
>  
> +	pm_runtime_disable(&dev->dev);
> +
>  	if (pdata == &ohci_platform_defaults)
>  		dev->dev.platform_data = NULL;

These changes make sense.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support

[Tony Lindgren]

* Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> [170518 08:28]:
> On Wed, 17 May 2017, Tony Lindgren wrote:
> 
> > This is needed in preparation of adding support for omap3 and
> > later OHCI. The runtime PM will only do something on platforms
> > that implement it.
> 
> This patch isn't correct.  See below.
> 
> > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> > Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> > Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> > ---
> >  drivers/usb/host/ohci-platform.c | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> > --- a/drivers/usb/host/ohci-platform.c
> > +++ b/drivers/usb/host/ohci-platform.c
> > @@ -24,6 +24,7 @@
> >  #include <linux/err.h>
> >  #include <linux/phy/phy.h>
> >  #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> >  #include <linux/reset.h>
> >  #include <linux/usb/ohci_pdriver.h>
> >  #include <linux/usb.h>
> > @@ -51,6 +52,10 @@ static int ohci_platform_power_on(struct platform_device *dev)
> >  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> >  	int clk, ret, phy_num;
> >  
> > +	ret = pm_runtime_get_sync(&dev->dev);
> > +	if (ret < 0)
> > +		return ret;
> > +
> >  	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
> >  		ret = clk_prepare_enable(priv->clks[clk]);
> >  		if (ret)
> > @@ -96,6 +101,8 @@ static void ohci_platform_power_off(struct platform_device *dev)
> >  	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
> >  		if (priv->clks[clk])
> >  			clk_disable_unprepare(priv->clks[clk]);
> > +
> > +	pm_runtime_put_sync(&dev->dev);
> >  }
> 
> ohci_platform_power_on() is invoked (by default) by the runtime-resume
> callback routine ohci_platform_resume(), through the pdata->power_on
> method pointer.  Likewise, ohci_platform_power_off() is invoked by the
> runtime-suspend callback routine.
> 
> This means you shouldn't do pm_runtime_get/put calls from within these 
> routines.

Oh OK great, so the above should not be needed at all.

> Is there any particular reason you wanted to add these calls?  In
> general, USB host controllers are expected to go into runtime suspend
> whenever there aren't any children keeping them awake.  Hence they
> usually don't need to worry about initiating their own suspends and
> resumes.

No particular reason as it sounds things work without it :) I'll check.

> >  static struct hc_driver __read_mostly ohci_platform_hc_driver;
> > @@ -242,6 +249,7 @@ static int ohci_platform_probe(struct platform_device *dev)
> >  	}
> >  #endif
> >  
> > +	pm_runtime_enable(&dev->dev);
> 
> There should be a pm_runtime_set_active() just before this.

OK

> >  	if (pdata->power_on) {
> >  		err = pdata->power_on(dev);
> >  		if (err < 0)
> > @@ -271,6 +279,7 @@ static int ohci_platform_probe(struct platform_device *dev)
> >  	if (pdata->power_off)
> >  		pdata->power_off(dev);
> >  err_reset:
> > +	pm_runtime_disable(&dev->dev);
> >  	while (--rst >= 0)
> >  		reset_control_assert(priv->resets[rst]);
> >  err_put_clks:
> > @@ -305,6 +314,8 @@ static int ohci_platform_remove(struct platform_device *dev)
> >  
> >  	usb_put_hcd(hcd);
> >  
> > +	pm_runtime_disable(&dev->dev);
> > +
> >  	if (pdata == &ohci_platform_defaults)
> >  		dev->dev.platform_data = NULL;
> 
> These changes make sense.

OK thanks for looking.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support

[Alan Stern]

On Wed, 17 May 2017, Tony Lindgren wrote:

> This is needed in preparation of adding support for omap3 and
> later OHCI. The runtime PM will only do something on platforms
> that implement it.

> @@ -51,6 +52,10 @@ static int ohci_platform_power_on(struct platform_device *dev)
>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
>  	int clk, ret, phy_num;
>  
> +	ret = pm_runtime_get_sync(&dev->dev);
> +	if (ret < 0)
> +		return ret;
> +

I don't remember how probing for platform device drivers is set up.    
So although this is definitely the wrong place for 
pm_runtime_get_sync(), it may turn out that you need to do a 
pm_runtime_get_noresume() before calling pm_runtime_enable(), and a 
pm_runtime_put() at the end of ohci_platform_probe().  Otherwise 
runtime PM might kick in during the middle of the probe sequence -- not 
what you want.

Similarly, you may need pm_runtime_get_sync() at the start of 
ohci_platform_remove() and pm_runtime_put_noidle() at the end.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support

[Tony Lindgren]

* Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> [170518 10:24]:
> On Wed, 17 May 2017, Tony Lindgren wrote:
> 
> > This is needed in preparation of adding support for omap3 and
> > later OHCI. The runtime PM will only do something on platforms
> > that implement it.
> 
> > @@ -51,6 +52,10 @@ static int ohci_platform_power_on(struct platform_device *dev)
> >  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> >  	int clk, ret, phy_num;
> >  
> > +	ret = pm_runtime_get_sync(&dev->dev);
> > +	if (ret < 0)
> > +		return ret;
> > +
> 
> I don't remember how probing for platform device drivers is set up.    
> So although this is definitely the wrong place for 
> pm_runtime_get_sync(), it may turn out that you need to do a 
> pm_runtime_get_noresume() before calling pm_runtime_enable(), and a 
> pm_runtime_put() at the end of ohci_platform_probe().  Otherwise 
> runtime PM might kick in during the middle of the probe sequence -- not 
> what you want.

Just removing those parts seems to work for probing.

> Similarly, you may need pm_runtime_get_sync() at the start of 
> ohci_platform_remove() and pm_runtime_put_noidle() at the end.

Yup that I noticed that too trying to rmmod it with no devices
connected.

While testing I also saw once "external abort on non-linefetch":

(ohci_hub_status_data [ohci_hcd]) from [<bf0298bc>]
(usb_hcd_poll_rh_status+0x3c/0x128 [usbcore])
(usb_hcd_poll_rh_status [usbcore]) from [<c01c790c>]
(call_timer_fn+0xb0/0x3f8)
(call_timer_fn) from [<c01c7d38>] (expire_timers+0xe4/0x220)
(expire_timers) from [<c01c7f08>] (run_timer_softirq+0x94/0x19c)
(run_timer_softirq) from [<c0141cf8>] (__do_softirq+0x140/0x570)

Also I'm still checking if legacy usb_phy vs phy needs handling.
So far it seems that no need to do anything because most devices
need a USB hub anyways unless they have USB serial transceiver
configured with drivers/mfd/omap-usb-host.c for LS/FS.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later

[Tony Lindgren]

With the runtime PM implemented for ohci-platform driver, we can
now support omap3 and later OHCI by adding one device tree
property.

Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 +
 drivers/usb/host/ohci-platform.c                   | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -10,6 +10,7 @@ Optional properties:
 - big-endian-desc : boolean, set this for hcds with big-endian descriptors
 - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
 - no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
+- remote-wakeup-connected: remote wakeup is wired on the platform
 - num-ports : u32, to override the detected port count
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -170,6 +170,10 @@ static int ohci_platform_probe(struct platform_device *dev)
 		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
 			ohci->flags |= OHCI_QUIRK_FRAME_NO;
 
+		if (of_property_read_bool(dev->dev.of_node,
+					  "remote-wakeup-connected"))
+			ohci->hc_control = OHCI_CTRL_RWC;
+
 		of_property_read_u32(dev->dev.of_node, "num-ports",
 				     &ohci->num_ports);
 
@@ -361,6 +365,7 @@ static int ohci_platform_resume(struct device *dev)
 static const struct of_device_id ohci_platform_ids[] = {
 	{ .compatible = "generic-ohci", },
 	{ .compatible = "cavium,octeon-6335-ohci", },
+	{ .compatible = "ti,ohci-omap3", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ohci_platform_ids);
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later

[Roger Quadros]

On 18/05/17 01:59, Tony Lindgren wrote:
> With the runtime PM implemented for ohci-platform driver, we can
> now support omap3 and later OHCI by adding one device tree
> property.
> 
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Acked-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>

> ---
>  Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 +
>  drivers/usb/host/ohci-platform.c                   | 5 +++++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> @@ -10,6 +10,7 @@ Optional properties:
>  - big-endian-desc : boolean, set this for hcds with big-endian descriptors
>  - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
>  - no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
> +- remote-wakeup-connected: remote wakeup is wired on the platform
>  - num-ports : u32, to override the detected port count
>  - clocks : a list of phandle + clock specifier pairs
>  - phys : phandle + phy specifier pair
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -170,6 +170,10 @@ static int ohci_platform_probe(struct platform_device *dev)
>  		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
>  			ohci->flags |= OHCI_QUIRK_FRAME_NO;
>  
> +		if (of_property_read_bool(dev->dev.of_node,
> +					  "remote-wakeup-connected"))
> +			ohci->hc_control = OHCI_CTRL_RWC;
> +
>  		of_property_read_u32(dev->dev.of_node, "num-ports",
>  				     &ohci->num_ports);
>  
> @@ -361,6 +365,7 @@ static int ohci_platform_resume(struct device *dev)
>  static const struct of_device_id ohci_platform_ids[] = {
>  	{ .compatible = "generic-ohci", },
>  	{ .compatible = "cavium,octeon-6335-ohci", },
> +	{ .compatible = "ti,ohci-omap3", },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, ohci_platform_ids);
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later

[Alan Stern]

On Wed, 17 May 2017, Tony Lindgren wrote:

> With the runtime PM implemented for ohci-platform driver, we can
> now support omap3 and later OHCI by adding one device tree
> property.
> 
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 +
>  drivers/usb/host/ohci-platform.c                   | 5 +++++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
> @@ -10,6 +10,7 @@ Optional properties:
>  - big-endian-desc : boolean, set this for hcds with big-endian descriptors
>  - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
>  - no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
> +- remote-wakeup-connected: remote wakeup is wired on the platform
>  - num-ports : u32, to override the detected port count
>  - clocks : a list of phandle + clock specifier pairs
>  - phys : phandle + phy specifier pair
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -170,6 +170,10 @@ static int ohci_platform_probe(struct platform_device *dev)
>  		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
>  			ohci->flags |= OHCI_QUIRK_FRAME_NO;
>  
> +		if (of_property_read_bool(dev->dev.of_node,
> +					  "remote-wakeup-connected"))
> +			ohci->hc_control = OHCI_CTRL_RWC;
> +
>  		of_property_read_u32(dev->dev.of_node, "num-ports",
>  				     &ohci->num_ports);
>  
> @@ -361,6 +365,7 @@ static int ohci_platform_resume(struct device *dev)
>  static const struct of_device_id ohci_platform_ids[] = {
>  	{ .compatible = "generic-ohci", },
>  	{ .compatible = "cavium,octeon-6335-ohci", },
> +	{ .compatible = "ti,ohci-omap3", },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, ohci_platform_ids);

Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later

[Tony Lindgren]

* Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> [170518 08:41]:
> On Wed, 17 May 2017, Tony Lindgren wrote:
> 
> > With the runtime PM implemented for ohci-platform driver, we can
> > now support omap3 and later OHCI by adding one device tree
> > property.
...
> > diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> > --- a/drivers/usb/host/ohci-platform.c
> > +++ b/drivers/usb/host/ohci-platform.c
> > @@ -170,6 +170,10 @@ static int ohci_platform_probe(struct platform_device *dev)
> >  		if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
> >  			ohci->flags |= OHCI_QUIRK_FRAME_NO;
> >  
> > +		if (of_property_read_bool(dev->dev.of_node,
> > +					  "remote-wakeup-connected"))
> > +			ohci->hc_control = OHCI_CTRL_RWC;
> > +
> >  		of_property_read_u32(dev->dev.of_node, "num-ports",
> >  				     &ohci->num_ports);
> >  
> > @@ -361,6 +365,7 @@ static int ohci_platform_resume(struct device *dev)
> >  static const struct of_device_id ohci_platform_ids[] = {
> >  	{ .compatible = "generic-ohci", },
> >  	{ .compatible = "cavium,octeon-6335-ohci", },
> > +	{ .compatible = "ti,ohci-omap3", },
> >  	{ }
> >  };
> >  MODULE_DEVICE_TABLE(of, ohci_platform_ids);
> 
> Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>

FYI, this depends on the patch1/4 PM runtime issue getting sorted out
first as otherwise the USB controller is powered off on omaps. So let's
not apply this yet.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform

[Tony Lindgren]

We can't just remove ohci-omap3 as that could make some people's
systems unusable for keyboard and mouse. Let's print a warning for
now, and then remove the driver in a year or so.

Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/host/ohci-omap3.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -130,6 +130,9 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
 		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
 	}
+
+	WARN(1, "ohci-omap3 is deprecated, please use ohci-platform instead\n");
+
 	device_wakeup_enable(hcd->self.controller);
 
 	return 0;
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1670 bytes --]

Hi,

On Wed, May 17, 2017 at 03:59:21PM -0700, Tony Lindgren wrote:
> We can't just remove ohci-omap3 as that could make some people's
> systems unusable for keyboard and mouse. Let's print a warning for
> now, and then remove the driver in a year or so.
> 
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

I guess you could drop the driver and modify the Kconfig entry,
so that it selects USB_OHCI_HCD_PLATFORM? I just checked and
there are already a few examples of this in the USB host Kconfig :)

-- Sebastian

> ---
>  drivers/usb/host/ohci-omap3.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
> --- a/drivers/usb/host/ohci-omap3.c
> +++ b/drivers/usb/host/ohci-omap3.c
> @@ -130,6 +130,9 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
>  		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
>  		goto err_add_hcd;
>  	}
> +
> +	WARN(1, "ohci-omap3 is deprecated, please use ohci-platform instead\n");
> +
>  	device_wakeup_enable(hcd->self.controller);
>  
>  	return 0;
> -- 
> 2.13.0
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform

[Tony Lindgren]

* Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170518 02:18]:
> On Wed, May 17, 2017 at 03:59:21PM -0700, Tony Lindgren wrote:
> > We can't just remove ohci-omap3 as that could make some people's
> > systems unusable for keyboard and mouse. Let's print a warning for
> > now, and then remove the driver in a year or so.
>
> I guess you could drop the driver and modify the Kconfig entry,
> so that it selects USB_OHCI_HCD_PLATFORM? I just checked and
> there are already a few examples of this in the USB host Kconfig :)

Right but there's still nothing telling people to load ohci-platform
instead of ohci-omap3 if we just remove ohci-omap3 without any warnings.
I don't think there's any need to rush to remove ohci-omap3.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1014 bytes --]

Hi,

On Thu, May 18, 2017 at 07:08:58AM -0700, Tony Lindgren wrote:
> * Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170518 02:18]:
> > On Wed, May 17, 2017 at 03:59:21PM -0700, Tony Lindgren wrote:
> > > We can't just remove ohci-omap3 as that could make some people's
> > > systems unusable for keyboard and mouse. Let's print a warning for
> > > now, and then remove the driver in a year or so.
> >
> > I guess you could drop the driver and modify the Kconfig entry,
> > so that it selects USB_OHCI_HCD_PLATFORM? I just checked and
> > there are already a few examples of this in the USB host Kconfig :)
> 
> Right but there's still nothing telling people to load ohci-platform
> instead of ohci-omap3 if we just remove ohci-omap3 without any warnings.

Shouldn't the driver be loaded automatically due to the DT
compatible value?

> I don't think there's any need to rush to remove ohci-omap3.

Just looked like it can be dropped with trivial changes.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform

[Tony Lindgren]

* Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170518 10:25]:
> Hi,
> 
> On Thu, May 18, 2017 at 07:08:58AM -0700, Tony Lindgren wrote:
> > * Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170518 02:18]:
> > > On Wed, May 17, 2017 at 03:59:21PM -0700, Tony Lindgren wrote:
> > > > We can't just remove ohci-omap3 as that could make some people's
> > > > systems unusable for keyboard and mouse. Let's print a warning for
> > > > now, and then remove the driver in a year or so.
> > >
> > > I guess you could drop the driver and modify the Kconfig entry,
> > > so that it selects USB_OHCI_HCD_PLATFORM? I just checked and
> > > there are already a few examples of this in the USB host Kconfig :)
> > 
> > Right but there's still nothing telling people to load ohci-platform
> > instead of ohci-omap3 if we just remove ohci-omap3 without any warnings.
> 
> Shouldn't the driver be loaded automatically due to the DT
> compatible value?

Doesn't that depend on a collection of user space software of
varying quality and usability? :)

But I think we can actually ohci-omap3 once the issues are sorted
out. That's because for OHCI omaps need an OHCI PHY. In most cases
there is just EHCI PHY and an external hub is needed. I'll do some
more testing.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform

[Alan Stern]

On Wed, 17 May 2017, Tony Lindgren wrote:

> We can't just remove ohci-omap3 as that could make some people's
> systems unusable for keyboard and mouse. Let's print a warning for
> now, and then remove the driver in a year or so.
> 
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/usb/host/ohci-omap3.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
> --- a/drivers/usb/host/ohci-omap3.c
> +++ b/drivers/usb/host/ohci-omap3.c
> @@ -130,6 +130,9 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
>  		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
>  		goto err_add_hcd;
>  	}
> +
> +	WARN(1, "ohci-omap3 is deprecated, please use ohci-platform instead\n");
> +
>  	device_wakeup_enable(hcd->self.controller);
>  
>  	return 0;

Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/4] ARM: dts: Add remote-wakeup-connected for omap OHCI

[Tony Lindgren]

Add remote-wakeup-connected for omap OHCI as that's needed by
ehci-platform driver.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/boot/dts/omap3.dtsi | 1 +
 arch/arm/boot/dts/omap4.dtsi | 1 +
 arch/arm/boot/dts/omap5.dtsi | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -715,6 +715,7 @@
 				reg = <0x48064400 0x400>;
 				interrupt-parent = <&intc>;
 				interrupts = <76>;
+				remote-wakeup-connected;
 			};
 
 			usbhsehci: ehci@48064800 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -863,6 +863,7 @@
 				reg = <0x4a064800 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				remote-wakeup-connected;
 			};
 
 			usbhsehci: ehci@4a064c00 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -939,6 +939,7 @@
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				remote-wakeup-connected;
 			};
 
 			usbhsehci: ehci@4a064c00 {
-- 
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 4/4] ARM: dts: Add remote-wakeup-connected for omap OHCI

[Roger Quadros]

On 18/05/17 01:59, Tony Lindgren wrote:
> Add remote-wakeup-connected for omap OHCI as that's needed by
> ehci-platform driver.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Acked-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>

> ---
>  arch/arm/boot/dts/omap3.dtsi | 1 +
>  arch/arm/boot/dts/omap4.dtsi | 1 +
>  arch/arm/boot/dts/omap5.dtsi | 1 +
>  3 files changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -715,6 +715,7 @@
>  				reg = <0x48064400 0x400>;
>  				interrupt-parent = <&intc>;
>  				interrupts = <76>;
> +				remote-wakeup-connected;
>  			};
>  
>  			usbhsehci: ehci@48064800 {
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -863,6 +863,7 @@
>  				reg = <0x4a064800 0x400>;
>  				interrupt-parent = <&gic>;
>  				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +				remote-wakeup-connected;
>  			};
>  
>  			usbhsehci: ehci@4a064c00 {
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -939,6 +939,7 @@
>  				compatible = "ti,ohci-omap3";
>  				reg = <0x4a064800 0x400>;
>  				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +				remote-wakeup-connected;
>  			};
>  
>  			usbhsehci: ehci@4a064c00 {
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 4/4] ARM: dts: Add remote-wakeup-connected for omap OHCI

[Alan Stern]

On Wed, 17 May 2017, Tony Lindgren wrote:

> Add remote-wakeup-connected for omap OHCI as that's needed by
> ehci-platform driver.

This should be "ohci", not "ehci".  Otherwise,

Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>

> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  arch/arm/boot/dts/omap3.dtsi | 1 +
>  arch/arm/boot/dts/omap4.dtsi | 1 +
>  arch/arm/boot/dts/omap5.dtsi | 1 +
>  3 files changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -715,6 +715,7 @@
>  				reg = <0x48064400 0x400>;
>  				interrupt-parent = <&intc>;
>  				interrupts = <76>;
> +				remote-wakeup-connected;
>  			};
>  
>  			usbhsehci: ehci@48064800 {
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -863,6 +863,7 @@
>  				reg = <0x4a064800 0x400>;
>  				interrupt-parent = <&gic>;
>  				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +				remote-wakeup-connected;
>  			};
>  
>  			usbhsehci: ehci@4a064c00 {
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -939,6 +939,7 @@
>  				compatible = "ti,ohci-omap3";
>  				reg = <0x4a064800 0x400>;
>  				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +				remote-wakeup-connected;
>  			};
>  
>  			usbhsehci: ehci@4a064c00 {
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html