From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 0/6] Init Clock frequences for accelerators Date: Mon, 12 Jun 2017 03:06:52 -0700 Message-ID: <20170612100652.GW3730@atomide.com> References: <20170607212730.33002-1-s-anna@ti.com> <20170612073635.GT3730@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Tero Kristo Cc: Suman Anna , Lokesh Vutla , Subhajit Paul , linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-omap@vger.kernel.org * Tero Kristo [170612 01:36]: > On 12/06/17 10:36, Tony Lindgren wrote: > > * Suman Anna [170607 14:31]: > > > Hi Tony, > > > > > > The following series configures the initial frequencies for the required > > > DPLLs and corresponding output divider clocks used by various remoteproc > > > accelerators (DSP, IVAHD) on OMAP4, OMAP5 & DRA7xx/AM57xx SoCs and the > > > GPU on DRA7xx/AM57xx SoCs. All these devices require Adaptive Voltage > > > Scaling (AVS) to be programmed at all OPPs at boot time, which is > > > programmed in the bootloader. Furthermore, DVFS is not supported on > > > these domains implying a one-time OPP clock frequency setup. > > > > Tero, care to comment or ack this series? > > These have been in use in TI releases for quite a while already, and look > fine, thus: > > Acked-by: Tero Kristo > > (Didn't quite think my ack was needed for them so didn't respond earlier, > sorry.) OK thanks applying all into omap-for-v4.13/dt. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html