From mboxrd@z Thu Jan 1 00:00:00 1970 From: Suman Anna Subject: [PATCH 3/5] ARM: dts: beagle-x15-common: Enable relevant IPU and DSP MMU nodes Date: Mon, 21 Aug 2017 18:51:56 -0500 Message-ID: <20170821235158.4968-4-s-anna@ti.com> References: <20170821235158.4968-1-s-anna@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20170821235158.4968-1-s-anna-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Tony Lindgren Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Tero Kristo , Suman Anna List-Id: linux-omap@vger.kernel.org The MMU nodes for the remote processors IPU1, IPU2, DSP1 and DSP2 have all been enabled. All these nodes are relevant and valid for all the AM57xx BeagleBoard-X15 board variants, so are added in the common dtsi file. Signed-off-by: Suman Anna --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 49aeecd312b4..be9640b6e225 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -587,3 +587,27 @@ status = "okay"; }; }; + +&mmu0_dsp1 { + status = "okay"; +}; + +&mmu1_dsp1 { + status = "okay"; +}; + +&mmu0_dsp2 { + status = "okay"; +}; + +&mmu1_dsp2 { + status = "okay"; +}; + +&mmu_ipu1 { + status = "okay"; +}; + +&mmu_ipu2 { + status = "okay"; +}; -- 2.13.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html