From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Helgaas Subject: Re: [PATCH v2] dwc: dra7xx: Print link state to console for debug Date: Tue, 24 Oct 2017 14:59:50 -0500 Message-ID: <20171024195950.GD21840@bhelgaas-glaptop.roam.corp.google.com> References: <1508417009-30869-1-git-send-email-faiz_abbas@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1508417009-30869-1-git-send-email-faiz_abbas@ti.com> Sender: linux-pci-owner@vger.kernel.org To: Faiz Abbas Cc: kishon@ti.com, bhelgaas@google.com, linux-omap@vger.kernel.org, linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-omap@vger.kernel.org On Thu, Oct 19, 2017 at 06:13:29PM +0530, Faiz Abbas wrote: > Enable support for printing the LTSSM link state for debugging PCI > when link is down. > > Signed-off-by: Faiz Abbas Applied with Kishon's ack to pci/host-dra7xx for v4.15, thanks! I tweaked the "link up" testing as follows (what I suggested before): @@ -118,8 +157,18 @@ static int dra7xx_pcie_link_up(struct dw_pcie *pci) { struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci); u32 reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS); + int link_up = !!(reg & LINK_UP); + u32 cmd_reg; + u32 ltssm_state; + + if (!link_up) { + cmd_reg = dra7xx_pcie_readl(dra7xx, + PCIECTRL_DRA7XX_CONF_DEVICE_CMD); + ltssm_state = (cmd_reg & GENMASK(7, 2)) >> 2; + dev_dbg(pci->dev, "Link state: %s\n", state[ltssm_state]); + } - return !!(reg & LINK_UP); + return link_up; } static void dra7xx_pcie_stop_link(struct dw_pcie *pci)