From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ladislav Michl Subject: Re: [RFC 5/5] pwm: pwm-omap-dmtimer: Add capture functionality Date: Mon, 8 Jan 2018 23:06:02 +0100 Message-ID: <20180108220602.GA17615@lenoch> References: <20180108153926.GA3916@lenoch> <20180108154336.GE4077@lenoch> <20180108215931.GV3875@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20180108215931.GV3875@atomide.com> Sender: linux-pwm-owner@vger.kernel.org To: Tony Lindgren Cc: Keerthy , aaro.koskinen@iki.fi, thierry.reding@gmail.com, daniel.lezcano@linaro.org, grygorii.strashko@ti.com, linux-omap@vger.kernel.org, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org, sebastian.reichel@collabora.co.uk, t-kristo@ti.com List-Id: linux-omap@vger.kernel.org On Mon, Jan 08, 2018 at 01:59:31PM -0800, Tony Lindgren wrote: > * Ladislav Michl [180108 15:46]: > > Here it seems hardware can capture both edges, but I do not see a way > > how to tell it I want start from either low to high or high to low > > transition. Clues? > > At least dm3730 TRM documents TCM bits [9:8] for TCLR, but you > probably know that already.. > > If you're having hard time getting things starting, maybe something > like this helps: > > stop timer in TCLR register > configure timer in TCLR > write some value to TLDR, maybe 0? > set ST bit in TCLR to start Let me clarify it a bit more. I have no problem starting timer and capture events. I just didn't find a way how to tell hardware I want to start with for example rising edge, so rising edge goes to TCAR1 and failing edge to TCAR2. Substracting those gives pulse width. ladis