From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Dave Gerlach <d-gerlach@ti.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Tero Kristo <t-kristo@ti.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/12] PM / AVS: SmartReflex: Prepare to use device tree based probing
Date: Fri, 23 Feb 2018 13:00:59 -0800 [thread overview]
Message-ID: <20180223210100.86732-12-tony@atomide.com> (raw)
In-Reply-To: <20180223210100.86732-1-tony@atomide.com>
We are currently probing smartreflex with omap_device while we are
already probing smartreflex related interconnect target module with
ti-sysc driver and dts data.
Before we can flip things on for ti-sysc, we need to prepare the
smartreflex driver a bit:
1. The smartreflex clock is really for the whole interconnect target
module. So it may be configured at the parent device level with
ti-sysc
2. With ti-sysc, we have the child device manage interconnect target
module directly if pm_runtime_irq_safe() is set and there is only
one child. In that case nobody else is going to call pm_runtime_get
and put, so we need to add these calls to idle smartreflex properly
after probe if not fully configured
3. With ti-sysc, the parent driver may rebind. So we want to use
platform_driver_register() and don't want probe to be __init
Note that this patch depends on the related changes to ti-sysc driver
and omap_device probing to prevent both ti-sysc and omap_device to
try to probe smartreflex.
Cc: linux-pm@vger.kernel.org
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/power/avs/smartreflex.c | 41 ++++++++++++++++++++++++++++++++++-------
1 file changed, 34 insertions(+), 7 deletions(-)
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -132,12 +132,16 @@ static void sr_set_clk_length(struct omap_sr *sr)
struct clk *fck;
u32 fclk_speed;
- fck = clk_get(&sr->pdev->dev, "fck");
-
+ /* Try interconnect target module fck first if it already exists */
+ fck = clk_get(sr->pdev->dev.parent, "fck");
if (IS_ERR(fck)) {
- dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
- __func__, dev_name(&sr->pdev->dev));
- return;
+ fck = clk_get(&sr->pdev->dev, "fck");
+ if (IS_ERR(fck)) {
+ dev_err(&sr->pdev->dev,
+ "%s: unable to get fck for device %s\n",
+ __func__, dev_name(&sr->pdev->dev));
+ return;
+ }
}
fclk_speed = clk_get_rate(fck);
@@ -838,7 +842,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
omap_sr_autocomp_store, "%llu\n");
-static int __init omap_sr_probe(struct platform_device *pdev)
+static int omap_sr_probe(struct platform_device *pdev)
{
struct omap_sr *sr_info;
struct omap_sr_data *pdata = pdev->dev.platform_data;
@@ -898,6 +902,12 @@ static int __init omap_sr_probe(struct platform_device *pdev)
list_add(&sr_info->node, &sr_list);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
+ goto err_list_del;
+ }
+
/*
* Call into late init to do initializations that require
* both sr driver and sr class driver to be initiallized.
@@ -966,12 +976,17 @@ static int __init omap_sr_probe(struct platform_device *pdev)
}
+ pm_runtime_put_sync(&pdev->dev);
+
return ret;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
err_list_del:
list_del(&sr_info->node);
+
+ pm_runtime_put_sync(&pdev->dev);
+
return ret;
}
@@ -1025,11 +1040,23 @@ static void omap_sr_shutdown(struct platform_device *pdev)
return;
}
+static const struct of_device_id omap_sr_match[] = {
+ { .compatible = "ti,omap3-smartreflex-core", },
+ { .compatible = "ti,omap3-smartreflex-mpu-iva", },
+ { .compatible = "ti,omap4-smartreflex-core", },
+ { .compatible = "ti,omap4-smartreflex-mpu", },
+ { .compatible = "ti,omap4-smartreflex-iva", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap_sr_match);
+
static struct platform_driver smartreflex_driver = {
+ .probe = omap_sr_probe,
.remove = omap_sr_remove,
.shutdown = omap_sr_shutdown,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = omap_sr_match,
},
};
@@ -1048,7 +1075,7 @@ static int __init sr_init(void)
else
pr_warn("%s: No PMIC hook to init smartreflex\n", __func__);
- ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+ ret = platform_driver_register(&smartreflex_driver);
if (ret) {
pr_err("%s: platform driver register failed for SR\n",
__func__);
--
2.16.2
next prev parent reply other threads:[~2018-02-23 21:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 21:00 [PATCH 00/12] Use dts data for ti-sysc to configure sysconfig Tony Lindgren
2018-02-23 21:00 ` [PATCH 01/12] bus: ti-sysc: Add fck clock alias for children with notifier_block Tony Lindgren
2018-02-23 21:00 ` [PATCH 02/12] bus: ti-sysc: Add suspend and resume handling Tony Lindgren
2018-02-23 21:00 ` [PATCH 03/12] bus: ti-sysc: Handle stdout-path for debug console Tony Lindgren
2018-02-23 21:00 ` [PATCH 04/12] bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init Tony Lindgren
2018-02-23 21:00 ` [PATCH 05/12] bus: ti-sysc: Remove unnecessary debugging statements Tony Lindgren
2018-02-23 21:00 ` [PATCH 06/12] bus: ti-sysc: Add support for platform data callbacks Tony Lindgren
2018-02-23 21:00 ` [PATCH 07/12] bus: ti-sysc: Handle some devices in omap_device compatible way Tony Lindgren
2018-03-01 0:37 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 08/12] ARM: OMAP2+: Add functions to allocate module data from device tree Tony Lindgren
2018-02-23 21:00 ` [PATCH 09/12] ARM: OMAP2+: Add checks for device tree based sysconfig data Tony Lindgren
2018-02-23 21:00 ` [PATCH 10/12] ARM: OMAP2+: Try to parse earlycon from parent too Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren [this message]
2018-02-26 10:37 ` [PATCH 11/12] PM / AVS: SmartReflex: Prepare to use device tree based probing Rafael J. Wysocki
2018-02-26 21:34 ` Tony Lindgren
2018-03-01 3:07 ` Kevin Hilman
2018-03-01 3:49 ` Tony Lindgren
2018-02-23 21:01 ` [PATCH 12/12] ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflex Tony Lindgren
2018-02-23 21:41 ` [PATCH 0.5/12] ARM: OMAP2+: Prepare to pass auxdata " Tony Lindgren
2018-02-26 8:37 ` kbuild test robot
2018-02-26 22:23 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180223210100.86732-12-tony@atomide.com \
--to=tony@atomide.com \
--cc=d-gerlach@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nm@ti.com \
--cc=rafael.j.wysocki@intel.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).