From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: [RFT 5/6] wclore: Fix timout errors after recovery Date: Tue, 29 May 2018 11:06:04 -0700 Message-ID: <20180529180605.73622-6-tony@atomide.com> References: <20180529180605.73622-1-tony@atomide.com> Return-path: In-Reply-To: <20180529180605.73622-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Kalle Valo Cc: Eyal Reizer , Kishon Vijay Abraham I , Guy Mishol , Luca Coelho , Maital Hahn , Maxim Altshul , Shahar Patury , linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-omap@vger.kernel.org After enabling runtime PM, if we force hardware reset multiple times with: # echo 1 > /sys/kernel/debug/ieee80211/phy0/wlcore/start_recovery We will after few tries get the following error: wlcore: ERROR timeout waiting for the hardware to complete initialization And then wlcore is unable to reconnect until after the wlcore related modules are reloaded. Let's fix this by moving pm_runtime_put() earlier before we restart the hardware. And let's use the sync version to make sure we're done before we restart. Note that we still will get -EBUSY warning from wl12xx_sdio_set_power() but let's fix that separately once we know exactly why we get the warning. Reported-by: Eyal Reizer Signed-off-by: Tony Lindgren --- drivers/net/wireless/ti/wlcore/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -977,6 +977,7 @@ static void wl1271_recovery_work(struct work_struct *work) } wlcore_op_stop_locked(wl); + pm_runtime_put_sync(wl->dev); ieee80211_restart_hw(wl->hw); @@ -986,8 +987,6 @@ static void wl1271_recovery_work(struct work_struct *work) */ wlcore_wake_queues(wl, WLCORE_QUEUE_STOP_REASON_FW_RESTART); - pm_runtime_put(wl->dev);