From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kalle Valo Subject: Re: [PATCH] wlcore: Add support for optional wakeirq Date: Fri, 5 Oct 2018 08:33:58 +0000 (UTC) Message-ID: <20181005083358.C9DA6601A0@smtp.codeaurora.org> References: <20181001214110.86774-1-tony@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20181001214110.86774-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Tony Lindgren Cc: Eyal Reizer , Kishon Vijay Abraham I , Guy Mishol , Luca Coelho , Maital Hahn , Maxim Altshul , Shahar Patury , linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-omap@vger.kernel.org Tony Lindgren wrote: > Now with wlcore using PM runtime, we can also add support for Linux > generic wakeirq handling for it if configured in the dts file. > > The wakeirq can be configured as the second interrupt in the dts file > with interrupts-extended property where it is the padconf irq of the OOB > GPIO pin used for wlcore interrupt. > > Note that eventually we should also allow configuring wlcore to use the > SDIO dat1 IRQ for wake-up, and in that case the the wakeirq should be > configured to be the padconf interrupt of the dat1 pin and not the > padconf interrupt of the OOB GPIO pin. > > Cc: Eyal Reizer > Signed-off-by: Tony Lindgren Patch applied to wireless-drivers-next.git, thanks. 3c83dd577c7f wlcore: Add support for optional wakeirq -- https://patchwork.kernel.org/patch/10622795/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches