From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
linux-omap@vger.kernel.org
Subject: [PATCH AUTOSEL 4.4 10/33] ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE
Date: Wed, 5 Dec 2018 04:51:08 -0500 [thread overview]
Message-ID: <20181205095131.7685-10-sashal@kernel.org> (raw)
In-Reply-To: <20181205095131.7685-1-sashal@kernel.org>
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
[ Upstream commit 373a500e34aea97971c9d71e45edad458d3da98f ]
We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/omap/omap-mcpdm.c | 43 ++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index 8d0d45d330e7..8eb2d12b6a34 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -54,6 +54,8 @@ struct omap_mcpdm {
unsigned long phys_base;
void __iomem *io_base;
int irq;
+ struct pm_qos_request pm_qos_req;
+ int latency[2];
struct mutex mutex;
@@ -273,6 +275,9 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+ int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+ int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
mutex_lock(&mcpdm->mutex);
@@ -285,6 +290,14 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
}
}
+ if (mcpdm->latency[stream2])
+ pm_qos_update_request(&mcpdm->pm_qos_req,
+ mcpdm->latency[stream2]);
+ else if (mcpdm->latency[stream1])
+ pm_qos_remove_request(&mcpdm->pm_qos_req);
+
+ mcpdm->latency[stream1] = 0;
+
mutex_unlock(&mcpdm->mutex);
}
@@ -296,7 +309,7 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
int stream = substream->stream;
struct snd_dmaengine_dai_dma_data *dma_data;
u32 threshold;
- int channels;
+ int channels, latency;
int link_mask = 0;
channels = params_channels(params);
@@ -336,14 +349,25 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
dma_data->maxburst =
(MCPDM_DN_THRES_MAX - threshold) * channels;
+ latency = threshold;
} else {
/* If playback is not running assume a stereo stream to come */
if (!mcpdm->config[!stream].link_mask)
mcpdm->config[!stream].link_mask = (0x3 << 3);
dma_data->maxburst = threshold * channels;
+ latency = (MCPDM_DN_THRES_MAX - threshold);
}
+ /*
+ * The DMA must act to a DMA request within latency time (usec) to avoid
+ * under/overflow
+ */
+ mcpdm->latency[stream] = latency * USEC_PER_SEC / params_rate(params);
+
+ if (!mcpdm->latency[stream])
+ mcpdm->latency[stream] = 10;
+
/* Check if we need to restart McPDM with this stream */
if (mcpdm->config[stream].link_mask &&
mcpdm->config[stream].link_mask != link_mask)
@@ -358,6 +382,20 @@ static int omap_mcpdm_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+ struct pm_qos_request *pm_qos_req = &mcpdm->pm_qos_req;
+ int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+ int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+ int latency = mcpdm->latency[stream2];
+
+ /* Prevent omap hardware from hitting off between FIFO fills */
+ if (!latency || mcpdm->latency[stream1] < latency)
+ latency = mcpdm->latency[stream1];
+
+ if (pm_qos_request_active(pm_qos_req))
+ pm_qos_update_request(pm_qos_req, latency);
+ else if (latency)
+ pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, latency);
if (!omap_mcpdm_active(mcpdm)) {
omap_mcpdm_start(mcpdm);
@@ -419,6 +457,9 @@ static int omap_mcpdm_remove(struct snd_soc_dai *dai)
free_irq(mcpdm->irq, (void *)mcpdm);
pm_runtime_disable(mcpdm->dev);
+ if (pm_qos_request_active(&mcpdm->pm_qos_req))
+ pm_qos_remove_request(&mcpdm->pm_qos_req);
+
return 0;
}
--
2.17.1
next prev parent reply other threads:[~2018-12-05 9:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-05 9:50 [PATCH AUTOSEL 4.4 01/33] ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup Sasha Levin
2018-12-05 9:51 ` [PATCH AUTOSEL 4.4 02/33] ARM: OMAP1: ams-delta: Fix possible use of uninitialized field Sasha Levin
2018-12-05 9:51 ` Sasha Levin [this message]
2018-12-05 9:51 ` [PATCH AUTOSEL 4.4 11/33] ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181205095131.7685-10-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).