From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Russell King <rmk@arm.linux.org.uk>,
Linus Walleij <linus.walleij@linaro.org>,
Tony Lindgren <tony@atomide.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-omap@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org,
Santosh Shilimkar <ssantosh@kernel.org>,
Russell King <rmk+kernel@armlinux.org.uk>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH-next 05/20] gpio: gpio-omap: remove irq_ack method
Date: Mon, 10 Jun 2019 20:10:48 +0300 [thread overview]
Message-ID: <20190610171103.30903-6-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20190610171103.30903-1-grygorii.strashko@ti.com>
From: Russell King <rmk+kernel@armlinux.org.uk>
The irq_ack method does not fit our hardware requirements. Edge
interrupts must be cleared before we handle them, and level interrupts
must be cleared after handling them.
We handle the interrupt clearance in our interrupt handler for edge IRQs
and in the unmask method for level IRQs.
Replace the irq_ack method with the no-op method from the dummy irq
chip.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/gpio/gpio-omap.c | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 01da1c17bb20..04e3da55e39c 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -852,14 +852,6 @@ static void gpio_irq_bus_sync_unlock(struct irq_data *data)
pm_runtime_put(bank->chip.parent);
}
-static void omap_gpio_ack_irq(struct irq_data *d)
-{
- struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned offset = d->hwirq;
-
- omap_clear_gpio_irqstatus(bank, offset);
-}
-
static void omap_gpio_mask_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
@@ -1181,11 +1173,8 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
#endif
/* MPUIO is a bit different, reading IRQ status clears it */
- if (bank->is_mpuio) {
- irqc->irq_ack = dummy_irq_chip.irq_ack;
- if (!bank->regs->wkup_en)
- irqc->irq_set_wake = NULL;
- }
+ if (bank->is_mpuio && !bank->regs->wkup_en)
+ irqc->irq_set_wake = NULL;
irq = &bank->chip.irq;
irq->chip = irqc;
@@ -1531,7 +1520,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
irqc->irq_startup = omap_gpio_irq_startup,
irqc->irq_shutdown = omap_gpio_irq_shutdown,
- irqc->irq_ack = omap_gpio_ack_irq,
+ irqc->irq_ack = dummy_irq_chip.irq_ack,
irqc->irq_mask = omap_gpio_mask_irq,
irqc->irq_unmask = omap_gpio_unmask_irq,
irqc->irq_set_type = omap_gpio_irq_type,
--
2.17.1
next prev parent reply other threads:[~2019-06-10 17:10 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-10 17:10 [PATCH-next 00/20] gpio: gpio-omap: set of fixes and big clean-up Grygorii Strashko
2019-06-10 17:10 ` [PATCH-next 01/20] gpio: gpio-omap: ensure irq is enabled before wakeup Grygorii Strashko
2019-06-12 7:54 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 02/20] gpio: gpio-omap: fix lack of irqstatus_raw0 for OMAP4 Grygorii Strashko
2019-06-12 7:55 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 03/20] gpio: gpio-omap: remove remainder of list management Grygorii Strashko
2019-06-12 7:56 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 04/20] gpio: gpio-omap: clean up edge interrupt handling Grygorii Strashko
2019-06-12 7:57 ` Linus Walleij
2019-06-10 17:10 ` Grygorii Strashko [this message]
2019-06-12 8:42 ` [PATCH-next 05/20] gpio: gpio-omap: remove irq_ack method Linus Walleij
2019-06-10 17:10 ` [PATCH-next 06/20] gpio: gpio-omap: move omap_gpio_request() and omap_gpio_free() Grygorii Strashko
2019-06-12 8:43 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 07/20] gpio: gpio-omap: simplify omap_gpio_get_direction() Grygorii Strashko
2019-06-12 8:47 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 08/20] gpio: gpio-omap: simplify get() method Grygorii Strashko
2019-06-12 8:49 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 09/20] gpio: gpio-omap: simplify get_multiple() Grygorii Strashko
2019-06-12 8:50 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 10/20] gpio: gpio-omap: simplify set_multiple() Grygorii Strashko
2019-06-12 8:51 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 11/20] gpio: gpio-omap: simplify bank->level_mask Grygorii Strashko
2019-06-10 17:10 ` [PATCH-next 12/20] gpio: gpio-omap: simplify read-modify-write Grygorii Strashko
2019-06-12 8:53 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 13/20] gpio: gpio-omap: simplify omap_toggle_gpio_edge_triggering() Grygorii Strashko
2019-06-12 8:54 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 14/20] gpio: gpio-omap: simplify omap_set_gpio_irqenable() Grygorii Strashko
2019-06-12 8:54 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 15/20] gpio: gpio-omap: remove dataout variation in context handling Grygorii Strashko
2019-06-12 8:55 ` Linus Walleij
2019-06-10 17:10 ` [PATCH-next 16/20] gpio: gpio-omap: clean up omap_gpio_restore_context() Grygorii Strashko
2019-06-12 8:56 ` Linus Walleij
2019-06-10 17:11 ` [PATCH-next 17/20] gpio: gpio-omap: constify register tables Grygorii Strashko
2019-06-12 8:57 ` Linus Walleij
2019-06-10 17:11 ` [PATCH-next 18/20] gpio: gpio-omap: clean up wakeup handling Grygorii Strashko
2019-06-12 8:58 ` Linus Walleij
2019-06-10 17:11 ` [PATCH-next 19/20] gpio: gpio-omap: irq_startup() must not return error codes Grygorii Strashko
2019-06-12 8:59 ` Linus Walleij
2019-06-10 17:11 ` [PATCH-next 20/20] gpio: gpio-omap: clean up register access in omap2_set_gpio_debounce() Grygorii Strashko
2019-06-12 9:11 ` Linus Walleij
2019-06-17 18:57 ` grygorii
2019-06-18 11:28 ` Linus Walleij
2019-06-11 7:37 ` [PATCH-next 00/20] gpio: gpio-omap: set of fixes and big clean-up Tony Lindgren
2019-06-12 9:23 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190610171103.30903-6-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=rmk@arm.linux.org.uk \
--cc=ssantosh@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox