From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Dave Gerlach <d-gerlach@ti.com>, Faiz Abbas <faiz_abbas@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Keerthy <j-keerthy@ti.com>, Nishanth Menon <nm@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Roger Quadros <rogerq@ti.com>, Suman Anna <s-anna@ti.com>,
Tero Kristo <t-kristo@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
Date: Tue, 23 Jul 2019 04:28:08 -0700 [thread overview]
Message-ID: <20190723112811.44381-6-tony@atomide.com> (raw)
In-Reply-To: <20190723112811.44381-1-tony@atomide.com>
The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7.
Otherwise we get the following warning on beagle-x15:
ti-sysc 48468000.target-module: could not add child clock ahclkr: -19
Fixes: 5241ccbf2819 ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports")
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 25 ++++++++++---------------
1 file changed, 10 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -2818,9 +2818,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x68000 0x2000>,
@@ -2854,9 +2853,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6c000 0x2000>,
@@ -2890,9 +2888,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x70000 0x2000>,
@@ -2926,9 +2923,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x74000 0x2000>,
@@ -2962,9 +2958,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
- <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
- clock-names = "fck", "ahclkx", "ahclkr";
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+ clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x78000 0x2000>,
--
2.21.0
next prev parent reply other threads:[~2019-07-23 11:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-23 11:28 [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle Tony Lindgren
2019-07-23 11:28 ` [PATCH 1/8] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss Tony Lindgren
2019-07-23 18:16 ` Suman Anna
2019-07-23 11:28 ` [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc Tony Lindgren
2019-07-23 19:03 ` Suman Anna
2019-07-24 5:50 ` Keerthy
2019-07-24 6:31 ` Tony Lindgren
2019-07-24 18:28 ` Suman Anna
2019-08-13 10:47 ` Tony Lindgren
2019-08-13 11:04 ` Jyri Sarha
2019-08-13 11:29 ` Tony Lindgren
2019-07-23 11:28 ` [PATCH 3/8] bus: ti-sysc: Fix handling of forced idle Tony Lindgren
2019-07-23 18:31 ` Suman Anna
2019-07-23 11:28 ` [PATCH 4/8] bus: ti-sysc: Fix using configured sysc mask value Tony Lindgren
2019-07-23 11:28 ` Tony Lindgren [this message]
2019-07-23 21:01 ` [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8 Suman Anna
2019-07-24 6:47 ` Tony Lindgren
2019-09-17 7:21 ` Tero Kristo
2019-09-18 15:51 ` Tony Lindgren
2019-07-23 11:28 ` [PATCH 6/8] ARM: dts: Fix flags for gpio7 Tony Lindgren
2019-07-23 21:58 ` Suman Anna
2019-07-23 11:28 ` [PATCH 7/8] ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 Tony Lindgren
2019-07-23 11:28 ` [PATCH 8/8] ARM: dts: Fix lcdc sysc flags for am3 Tony Lindgren
2019-07-24 5:52 ` [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190723112811.44381-6-tony@atomide.com \
--to=tony@atomide.com \
--cc=d-gerlach@ti.com \
--cc=faiz_abbas@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=rogerq@ti.com \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).