From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benoit Parrot Subject: [Patch v4 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes Date: Wed, 11 Dec 2019 08:05:56 -0600 Message-ID: <20191211140558.10407-9-bparrot@ti.com> References: <20191211140558.10407-1-bparrot@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20191211140558.10407-1-bparrot@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren , Tero Kristo , linux-omap@vger.kernel.org, linux-clk@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Benoit Parrot List-Id: linux-omap@vger.kernel.org Add device nodes for CSI2 camera board OV5640. Add the CAL port nodes with the necessary linkage to the ov5640 nodes. Signed-off-by: Benoit Parrot --- arch/arm/boot/dts/dra76-evm.dts | 35 +++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 1fb6f13fb5e2..a17d4875bb2e 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -116,6 +116,12 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &i2c1 { @@ -317,6 +323,27 @@ }; }; +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + &cpu0 { vdd-supply = <&buck10_reg>; }; @@ -447,3 +474,11 @@ max-bitrate = <5000000>; }; }; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; -- 2.17.1