From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benoit Parrot Subject: [Patch v3 2/3] ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries Date: Wed, 11 Dec 2019 08:07:19 -0600 Message-ID: <20191211140720.10539-3-bparrot@ti.com> References: <20191211140720.10539-1-bparrot@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20191211140720.10539-1-bparrot@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren , Tero Kristo , linux-omap@vger.kernel.org, linux-clk@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Benoit Parrot List-Id: linux-omap@vger.kernel.org Add VPFE device nodes entries. Add OmniVision OV2659 sensor device nodes and linkage. The sensor clock (xvclk) is sourced from clkout1. Add clock entries to properly select clkout1 and set its parent clock to sys_clkin_ck. Signed-off-by: Benoit Parrot --- arch/arm/boot/dts/am437x-sk-evm.dts | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 74eaa6a3b258..25222497f828 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -272,6 +272,12 @@ >; }; + clkout1_pin: pinmux_clkout1_pin { + pinctrl-single,pins = < + 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */ + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -593,6 +599,25 @@ pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&clkout1_pin>; + + clocks = <&clkout1_mux_ck>; + clock-names = "xvclk"; + assigned-clocks = <&clkout1_mux_ck>; + assigned-clock-parents = <&clkout1_osc_div_ck>; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; + edt-ft5306@38 { status = "okay"; compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; @@ -877,7 +902,7 @@ /* Camera port */ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; -- 2.17.1