From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
devicetree@vger.kernel.org, "Merlijn Wajer" <merlijn@wizzup.org>,
"Pavel Machek" <pavel@ucw.cz>
Subject: [PATCH] ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
Date: Sun, 19 Jan 2020 11:45:01 -0800 [thread overview]
Message-ID: <20200119194501.17125-1-tony@atomide.com> (raw)
We added coulomb counter calibration support With commit 0cb90f071f73
("power: supply: cpcap-battery: Add basic coulomb counter calibrate
support"), but we also need to configure the related interrupt.
Without the interrupt calibration happens based on a timeout after two
seconds, with the interrupt the calibration just gets done a bit faster.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -27,11 +27,12 @@
compatible = "motorola,cpcap-battery";
interrupts-extended = <
&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
- &cpcap 20 0 &cpcap 54 0
+ &cpcap 20 0 &cpcap 54 0 &cpcap 57 0
>;
interrupt-names =
"eol", "lowbph", "lowbpl",
- "chrgcurr1", "battdetb";
+ "chrgcurr1", "battdetb",
+ "cccal";
io-channels = <&cpcap_adc 0 &cpcap_adc 1
&cpcap_adc 5 &cpcap_adc 6>;
io-channel-names = "battdetb", "battp",
--
2.24.1
next reply other threads:[~2020-01-19 19:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-19 19:45 Tony Lindgren [this message]
[not found] ` <20200119194501.17125-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2020-01-21 9:16 ` [PATCH] ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200119194501.17125-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).