linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-omap@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 22/33] bus: ti-sysc: Add module enable quirk for audio AESS
Date: Thu, 23 Jan 2020 20:16:57 -0500	[thread overview]
Message-ID: <20200124011708.18232-22-sashal@kernel.org> (raw)
In-Reply-To: <20200124011708.18232-1-sashal@kernel.org>

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 020003f763e24e4ed0bb3d8909f3940891536d5d ]

We must set the autogating bit on enable for AESS (Audio Engine SubSystem)
when probed with ti-sysc interconnect target module driver. Otherwise it
won't idle properly.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c                 | 14 +++++++++++++-
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index c072a7fe709c3..6dc9d460e3065 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1242,6 +1242,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE),
 
 	/* Quirks that need to be set based on detected module */
+	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
+		   SYSC_MODULE_QUIRK_AESS),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
@@ -1270,7 +1272,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 #ifdef DEBUG
 	SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
 	SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
-	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0),
 	SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
 	SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
@@ -1402,6 +1403,14 @@ static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
 	sysc_write(ddata, offset, val);
 }
 
+/* AESS (Audio Engine SubSystem) needs autogating set after enable */
+static void sysc_module_enable_quirk_aess(struct sysc *ddata)
+{
+	int offset = 0x7c;	/* AESS_AUTO_GATING_ENABLE */
+
+	sysc_write(ddata, offset, 1);
+}
+
 /* I2C needs extra enable bit toggling for reset */
 static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable)
 {
@@ -1484,6 +1493,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_AESS)
+		ddata->module_enable_quirk = sysc_module_enable_quirk_aess;
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
 		ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
 
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index b5b7a3423ca81..0b93804751444 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)
 #define SYSC_MODULE_QUIRK_HDQ1W		BIT(17)
 #define SYSC_MODULE_QUIRK_I2C		BIT(16)
-- 
2.20.1

  parent reply	other threads:[~2020-01-24  1:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200124011708.18232-1-sashal@kernel.org>
2020-01-24  1:16 ` [PATCH AUTOSEL 5.4 10/33] bus: ti-sysc: Handle mstandby quirk and use it for musb Sasha Levin
2020-01-24  1:16 ` [PATCH AUTOSEL 5.4 11/33] bus: ti-sysc: Use swsup quirks also for am335x musb Sasha Levin
2020-01-24  1:16 ` Sasha Levin [this message]
2020-01-24  1:17 ` [PATCH AUTOSEL 5.4 29/33] bus: ti-sysc: Fix missing force mstandby quirk handling Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200124011708.18232-22-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=stable@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).