Re: [PATCH v3] extcon: palmas: hide error messages if gpio returns -EPROBE_DEFER

[Ladislav Michl <ladis@linux-mips.org>]

On Mon, Feb 17, 2020 at 02:58:14PM +0100, H. Nikolaus Schaller wrote:
> 
> > Am 17.02.2020 um 14:38 schrieb H. Nikolaus Schaller <hns@goldelico.com>:
> > 
> > If the gpios are probed after this driver (e.g. if they
> > come from an i2c expander) there is no need to print an
> > error message.
> > 
> > Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> > ---
> > drivers/extcon/extcon-palmas.c | 8 ++++++--
> > 1 file changed, 6 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> > index edc5016f46f1..cea58d0cb457 100644
> > --- a/drivers/extcon/extcon-palmas.c
> > +++ b/drivers/extcon/extcon-palmas.c
> > @@ -205,14 +205,18 @@ static int palmas_usb_probe(struct platform_device *pdev)
> > 
> > 	palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
> > 							GPIOD_IN);
> > -	if (IS_ERR(palmas_usb->id_gpiod)) {
> > +	if (PTR_ERR(palmas_usb->id_gpiod) == -EPROBE_DEFER) {
> > +		return -EPROBE_DEFER;
> > +	} else if (IS_ERR(palmas_usb->id_gpiod)) {
> 
> Hm.
> 
> While looking again at that: why do we need the "{" and "} else "?
> 
> It should be sufficient to have
> 
> > 	palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
> > 							GPIOD_IN);
> > +	if (PTR_ERR(palmas_usb->id_gpiod) == -EPROBE_DEFER)
> > +		return -EPROBE_DEFER;
> > 	if (IS_ERR(palmas_usb->id_gpiod)) {
> 
> What do you think is better coding style here?

How about something like this? (just an idea with some work left for you ;-))

--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -206,8 +206,10 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
 							GPIOD_IN);
 	if (IS_ERR(palmas_usb->id_gpiod)) {
-		dev_err(&pdev->dev, "failed to get id gpio\n");
-		return PTR_ERR(palmas_usb->id_gpiod);
+		status = PTR_ERR(palmas_usb->id_gpiod);
+		if (status != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to get id gpio: %d\n", status);
+		return status;
 	}
 
 	palmas_usb->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus",