From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
devicetree@vger.kernel.org, "Roger Quadros" <rogerq@ti.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Santosh Shilimkar" <ssantosh@kernel.org>,
"Stephen Boyd" <sboyd@kernel.org>, "Suman Anna" <s-anna@ti.com>,
"Tero Kristo" <t-kristo@ti.com>,
linux-clk@vger.kernel.org
Subject: [PATCH 5/8] ARM: OMAP2+: Drop legacy platform data for dra7 gpmc
Date: Thu, 19 Nov 2020 15:12:56 +0200 [thread overview]
Message-ID: <20201119131259.63829-6-tony@atomide.com> (raw)
In-Reply-To: <20201119131259.63829-1-tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dra7.dtsi | 48 +++++++++++++++-------
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 49 -----------------------
2 files changed, 33 insertions(+), 64 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -724,22 +724,40 @@ sata: sata@4a141100 {
/* OCP2SCP1 */
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- reg = <0x50000000 0x37c>; /* device IO registers */
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 4 0>;
- dma-names = "rxtx";
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <2>;
- #address-cells = <2>;
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
#size-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- status = "disabled";
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ reg = <0x50000000 0x37c>; /* device IO registers */
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 4 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
};
target-module@56000000 {
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -242,46 +242,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
},
};
-/*
- * 'gpmc' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_gpmc_hwmod_class = {
- .name = "gpmc",
- .sysc = &dra7xx_gpmc_sysc,
-};
-
-/* gpmc */
-
-static struct omap_hwmod dra7xx_gpmc_hwmod = {
- .name = "gpmc",
- .class = &dra7xx_gpmc_hwmod_class,
- .clkdm_name = "l3main1_clkdm",
- /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
- .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS,
- .main_clk = "l3_iclk_div",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET,
- .context_offs = DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
-};
-
-
-
/*
* 'mpu' class
*
@@ -611,14 +571,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_main_1 -> gpmc */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
- .master = &dra7xx_l3_main_1_hwmod,
- .slave = &dra7xx_gpmc_hwmod,
- .clk = "l3_iclk_div",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
/* l4_cfg -> mpu */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
.master = &dra7xx_l4_cfg_hwmod,
@@ -722,7 +674,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per2__atl,
&dra7xx_l3_main_1__bb2d,
&dra7xx_l4_wkup__ctrl_module_wkup,
- &dra7xx_l3_main_1__gpmc,
&dra7xx_l4_cfg__mpu,
&dra7xx_l3_main_1__pciess1,
&dra7xx_l4_cfg__pciess1,
--
2.29.2
next prev parent reply other threads:[~2020-11-19 13:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-19 13:12 [PATCH 0/8] Configure genpd domains for dra7 and omap5 Tony Lindgren
2020-11-19 13:12 ` [PATCH 1/8] clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks Tony Lindgren
2020-12-09 2:19 ` Stephen Boyd
2020-11-19 13:12 ` [PATCH 2/8] soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances Tony Lindgren
2020-11-19 13:12 ` [PATCH 3/8] ARM: dts: dra7: add " Tony Lindgren
2020-11-19 13:12 ` [PATCH 4/8] ARM: dts: Configure interconnect target module for dra7 iva Tony Lindgren
2020-11-19 13:12 ` Tony Lindgren [this message]
2020-11-19 13:12 ` [PATCH 6/8] soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances Tony Lindgren
2020-11-19 13:12 ` [PATCH 7/8] ARM: dts: omap5: add " Tony Lindgren
2020-11-19 13:12 ` [PATCH 8/8] ARM: dts: Configure power domain for omap5 dss Tony Lindgren
2020-11-19 13:20 ` [PATCH 0/8] Configure genpd domains for dra7 and omap5 Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201119131259.63829-6-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rogerq@ti.com \
--cc=s-anna@ti.com \
--cc=sboyd@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox