[PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema

[PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit fb97f63106f3174992a22fe5e42dda96a0810750 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-boneblack-wireless.dts | 2 +-
 arch/arm/boot/dts/am335x-boneblue.dts           | 2 +-
 arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 4 ++--
 arch/arm/boot/dts/am335x-icev2.dts              | 4 ++--
 arch/arm/boot/dts/am335x-shc.dts                | 8 ++++----
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 3124d94c0b3c..3056c3e3e312 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -102,7 +102,7 @@ bluetooth {
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 2f6652ef9a15..8b98aa2d9588 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -435,7 +435,7 @@ &dcan1 {
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 4092cd193b8a..8d85c6a851c3 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -102,7 +102,7 @@ bluetooth {
 };
 
 &gpio1 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -119,7 +119,7 @@ ls_buf_en {
 /* an external pulldown on U21 pin 4.                                  */
 
 &gpio3 {
-	bt_aud_in {
+	bt-aud-in-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 204bccfcc110..1e52dfe4f2d3 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -445,14 +445,14 @@ &uart3 {
 };
 
 &gpio3 {
-	p4 {
+	pr1-mii-ctl-hog {
 		gpio-hog;
 		gpios = <4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PR1_MII_CTRL";
 	};
 
-	p10 {
+	mux-mii-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 5b0368504015..852cf61478e6 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -144,14 +144,14 @@ ehrpwm1: pwm@200 {
 };
 
 &gpio1 {
-	hmtc_rst {
+	hmtc-rst-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "homematic_reset";
 	};
 
-	hmtc_prog {
+	hmtc-prog-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		output-high;
@@ -160,14 +160,14 @@ hmtc_prog {
 };
 
 &gpio3 {
-	zgb_rst {
+	zgb-rst-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "zigbee_reset";
 	};
 
-	zgb_boot {
+	zgb-boot-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.30.2

[PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 4 ++--
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 811c8cae315b..acc4c2760f46 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -802,7 +802,7 @@ &gpio0 {
 	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
 
-	p23 {
+	sel-emmc-nand-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		/* SelEMMCorNAND selects between eMMC and NAND:
@@ -835,7 +835,7 @@ &gpio5 {
 	status = "okay";
 	ti,no-reset-on-init;
 
-	p8 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a6fbc088daa8..45a44c705a70 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -717,7 +717,7 @@ &gpio2 {
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p1 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
-- 
2.30.2

[PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: align gpio hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit cfb4ab3b5df86c6001127346d8331f5e87012f91 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-evm-processor-common.dtsi | 2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@ &uart3 {
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..9ce8d81250aa 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@ pps {
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
-- 
2.30.2

[PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: align gpio hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 4823117cb80eedf31ddbc126b9bd92e707bd9a26 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 68ac04641bdb..c73f32e8ca0f 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -149,7 +149,7 @@ sound: sound {
 
 &gpio8 {
 	/* TI trees use GPIO instead of msecure, see also muxing */
-	p234 {
+	msecure-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.30.2

[PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ]

The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dra7-evm.dts          | 2 +-
 arch/arm/boot/dts/dra71-evm.dts         | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
 arch/arm/boot/dts/dra76-evm.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index de7f85efaa51..498ccb46bca8 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -332,7 +332,7 @@ pcf_hdmi: gpio@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index fabeb7704753..88178a64b04f 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -158,7 +158,7 @@ &pcf_gpio_21 {
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8641a3d7d8ad..3638e0cefe38 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -261,7 +261,7 @@ pcf_hdmi: pcf8575@26 {
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..9bcb91841a02 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -292,7 +292,7 @@ pcf_hdmi: pcf8575@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
-- 
2.30.2

[PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 5 ++---
 arch/arm/boot/dts/dra7-l4.dtsi            | 4 ++--
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 34ca761aeded..e86d4795e024 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -611,12 +611,11 @@ &mcasp3 {
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index bc702579488b..3f845a8531f4 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1326,7 +1326,7 @@ gpio8: gpio@0 {
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1359,7 +1359,7 @@ gpio2: gpio@0 {
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
-- 
2.30.2

[PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 5 ++++-
 arch/arm/boot/dts/am437x-l4.dtsi    | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index acc4c2760f46..537c9eb8b748 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -829,11 +829,14 @@ &gpio4 {
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	sel-lcd-hdmi-hog {
 		/*
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index bbe15775fccd..6c2949991e29 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2077,7 +2077,7 @@ gpio4: gpio@0 {
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio6";
 			reg = <0x22000 0x4>,
-- 
2.30.2