From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
"H . Nikolaus Schaller" <hns@goldelico.com>,
Sicelo Mhlongo <absicsz@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH 3/3] ARM: OMAP2+: Drop legacy hwmod data for omap3 otg
Date: Fri, 18 Nov 2022 12:42:26 +0200 [thread overview]
Message-ID: <20221118104226.46223-4-tony@atomide.com> (raw)
In-Reply-To: <20221118104226.46223-1-tony@atomide.com>
With complete devicetree data available to probe with ti-sysc interconnect
target module driver, we can now drop the related SoC data.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Sicelo Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 99 ----------------------
1 file changed, 99 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1135,65 +1135,6 @@ static struct omap_hwmod omap34xx_mcspi4 = {
.class = &omap34xx_mcspi_class,
};
-/* usbhsotg */
-static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
- .rev_offs = 0x0400,
- .sysc_offs = 0x0404,
- .syss_offs = 0x0408,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
- .name = "usbotg",
- .sysc = &omap3xxx_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
- .name = "usb_otg_hs",
- .main_clk = "hsotgusb_ick",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
- },
- },
- .class = &usbotg_class,
-
- /*
- * Erratum ID: i479 idle_req / idle_ack mechanism potentially
- * broken when autoidle is enabled
- * workaround is to disable the autoidle bit at module level.
- *
- * Enabling the device in any other MIDLEMODE setting but force-idle
- * causes core_pwrdm not enter idle states at least on OMAP3630.
- * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
- * signal when MIDLEMODE is set to force-idle.
- */
- .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE |
- HWMOD_FORCE_MSTANDBY | HWMOD_RECONFIG_IO_CHAIN,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod_class am35xx_usbotg_class = {
- .name = "am35xx_usbotg",
-};
-
-static struct omap_hwmod am35xx_usbhsotg_hwmod = {
- .name = "am35x_otg_hs",
- .main_clk = "hsotgusb_fck",
- .class = &am35xx_usbotg_class,
- .flags = HWMOD_NO_IDLEST,
-};
-
/* MMC/SD/SDIO common */
static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
.rev_offs = 0x1fc,
@@ -1561,22 +1502,6 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
- .master = &omap3xxx_usbhsotg_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
- .user = OCP_USER_MPU,
-};
-
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
- .master = &am35xx_usbhsotg_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .clk = "hsotgusb_ick",
- .user = OCP_USER_MPU,
-};
-
/* l3_core -> sad2d interface */
static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
.master = &omap3xxx_sad2d_hwmod,
@@ -1758,24 +1683,6 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
.user = OCP_USER_MPU,
};
-
-/* l4_core -> usbhsotg */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_usbhsotg_hwmod,
- .clk = "l4_ick",
- .user = OCP_USER_MPU,
-};
-
-
-/* l4_core -> usbhsotg */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &am35xx_usbhsotg_hwmod,
- .clk = "hsotgusb_ick",
- .user = OCP_USER_MPU,
-};
-
/* L4_WKUP -> L4_SEC interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
.master = &omap3xxx_l4_wkup_hwmod,
@@ -2465,8 +2372,6 @@ static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_dss__l3,
&omap3xxx_l4_core__dss,
- &omap3xxx_usbhsotg__l3,
- &omap3xxx_l4_core__usbhsotg,
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
&omap3xxx_l4_core__usb_tll_hs,
@@ -2509,8 +2414,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__dss,
&omap36xx_l4_core__sr1,
&omap36xx_l4_core__sr2,
- &omap3xxx_usbhsotg__l3,
- &omap3xxx_l4_core__usbhsotg,
&omap3xxx_l4_core__mailbox,
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
@@ -2528,8 +2431,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_dss__l3,
&omap3xxx_l4_core__dss,
- &am35xx_usbhsotg__l3,
- &am35xx_l4_core__usbhsotg,
&am35xx_l4_core__uart4,
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
--
2.38.1
next prev parent reply other threads:[~2022-11-18 10:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 10:42 [PATCH 0/3] Update musb to probe with ti-sysc for omap3 Tony Lindgren
2022-11-18 10:42 ` [PATCH 1/3] bus: ti-sysc: Add otg quirk flags for omap3 musb Tony Lindgren
2022-11-19 4:09 ` Sicelo
2022-11-18 10:42 ` [PATCH 2/3] ARM: dts: Update omap3 musb to probe with ti-sysc Tony Lindgren
2022-11-19 4:11 ` Sicelo
2022-11-18 10:42 ` Tony Lindgren [this message]
2022-11-19 4:12 ` [PATCH 3/3] ARM: OMAP2+: Drop legacy hwmod data for omap3 otg Sicelo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118104226.46223-4-tony@atomide.com \
--to=tony@atomide.com \
--cc=absicsz@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hns@goldelico.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox