From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, javierm@redhat.com, sam@ravnborg.org,
deller@gmx.de, geert+renesas@glider.be, lee@kernel.org,
daniel.thompson@linaro.org, jingoohan1@gmail.com
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-sh@vger.kernel.org, linux-omap@vger.kernel.org,
linux-staging@lists.linux.dev,
Thomas Zimmermann <tzimmermann@suse.de>
Subject: [PATCH 00/30] fbdev: Make userspace interfaces optional
Date: Mon, 5 Jun 2023 16:47:42 +0200 [thread overview]
Message-ID: <20230605144812.15241-1-tzimmermann@suse.de> (raw)
Add the new config option FB_DEVICE. If enabled, fbdev provides
traditional userspace interfaces in devfs, sysfs and procfs, such
as /dev/fb0 or /proc/fb.
Modern Linux distrobutions have adopted DRM drivers for graphics
output and use fbdev only for the kernel's framebuffer console.
Userspace has also moved on, with no new fbdev code being written
and existing support being removed.
OTOH, fbdev provides userspace a way of accessing kernel or I/O
memory, which might compromise the system's security. See the recent
commit c8687694bb1f ("drm/fbdev-generic: prohibit potential
out-of-bounds access") for an example. Disabling fbdev userspace
interfaces is therefore a useful feature to limit unecessary
exposure of fbdev code to processes of low privilegues.
Patches 1 to 24 fix various bugs and issues in fbdev-related code.
In most cases the code uses the fbdev device where is should use
the Linux hardware device or someing else. Most of these patches
fix existing problems and should therefore be considered in any case.
Patches 25 to 29 refactor the fbdev core code. The patches move
support for backlights, sysfs, procfs and devfs into separate files
and hide it behind simple interfaces. These changes will allow to
easily build the userspace support conditionally.
Patch 30 introduces the config option FB_DEVICE and adapts the
fbdev core to support it. The field struct fb_info.dev is now also
optional, hence the name of the config option.
Tested on simpledrm and i915, including the device handover.
Future directions: With the support for disabling fbdev userspace
interfaces in place, it will be possible to make mosti fbdev drivers'
file-I/O code optional as well.
Thomas Zimmermann (30):
backlight/bd6107: Compare against struct fb_info.device
backlight/gpio_backlight: Compare against struct fb_info.device
backlight/lv5207lp: Compare against struct fb_info.device
fbdev/atyfb: Reorder backlight and framebuffer init/cleanup
fbdev/atyfb: Use hardware device as backlight parent
fbdev/aty128fb: Reorder backlight and framebuffer init/cleanup
fbdev/aty128fb: Use hardware device as backlight parent
fbdev/broadsheetfb: Call device_remove_file() with hardware device
fbdev/ep93xx-fb: Alloc DMA memory from hardware device
fbdev/ep93xx-fb: Output messages with fb_info() and fb_err()
fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
fbdev/mb862xxfb: Output messages with fb_dbg() and fb_err()
fbdev/metronomefb: Use hardware device for dev_err()
fbdev/nvidiafb: Reorder backlight and framebuffer init/cleanup
fbdev/nvidiafb: Use hardware device as backlight parent
fbdev/pxa168fb: Do not assign to struct fb_info.dev
fbdev/radeonfb: Reorder backlight and framebuffer cleanup
fbdev/radeonfb: Use hardware device as backlight parent
fbdev/rivafb: Reorder backlight and framebuffer init/cleanup
fbdev/rivafb: Use hardware device as backlight parent
fbdev/sm501fb: Output message with fb_err()
fbdev/smscufx: Detect registered fb_info from refcount
fbdev/tdfxfb: Set i2c adapter parent to hardware device
fbdev/core: Pass Linux device to pm_vt_switch_*() functions
fbdev/core: Move framebuffer and backlight helpers into separate files
fbdev/core: Add fb_device_{create,destroy}()
fbdev/core: Move procfs code to separate file
fbdev/core: Move file-I/O code into separate file
fbdev/core: Rework fb init code
fbdev: Make support for userspace interfaces configurable
arch/sh/boards/mach-ecovec24/setup.c | 2 +-
arch/sh/boards/mach-kfr2r09/setup.c | 2 +-
drivers/staging/fbtft/Kconfig | 1 +
drivers/video/backlight/bd6107.c | 2 +-
drivers/video/backlight/gpio_backlight.c | 6 +-
drivers/video/backlight/lv5207lp.c | 2 +-
drivers/video/fbdev/Kconfig | 12 +
drivers/video/fbdev/aty/aty128fb.c | 12 +-
drivers/video/fbdev/aty/atyfb_base.c | 18 +-
drivers/video/fbdev/aty/radeon_backlight.c | 2 +-
drivers/video/fbdev/aty/radeon_base.c | 3 +-
drivers/video/fbdev/broadsheetfb.c | 2 +-
drivers/video/fbdev/core/Makefile | 7 +-
drivers/video/fbdev/core/fb_backlight.c | 32 +
drivers/video/fbdev/core/fb_devfs.c | 484 +++++++++++++++
drivers/video/fbdev/core/fb_info.c | 76 +++
drivers/video/fbdev/core/fb_internal.h | 61 ++
drivers/video/fbdev/core/fb_procfs.c | 62 ++
drivers/video/fbdev/core/fbcon.c | 1 +
drivers/video/fbdev/core/fbmem.c | 594 +------------------
drivers/video/fbdev/core/fbsysfs.c | 134 +----
drivers/video/fbdev/ep93xx-fb.c | 21 +-
drivers/video/fbdev/mb862xx/mb862xxfbdrv.c | 7 +-
drivers/video/fbdev/metronomefb.c | 2 +-
drivers/video/fbdev/nvidia/nv_backlight.c | 2 +-
drivers/video/fbdev/nvidia/nvidia.c | 8 +-
drivers/video/fbdev/omap2/omapfb/Kconfig | 2 +-
drivers/video/fbdev/pxa168fb.c | 2 +-
drivers/video/fbdev/riva/fbdev.c | 10 +-
drivers/video/fbdev/sm501fb.c | 2 +-
drivers/video/fbdev/smscufx.c | 4 +-
drivers/video/fbdev/tdfxfb.c | 4 +-
include/linux/fb.h | 6 +-
include/linux/platform_data/bd6107.h | 2 +-
include/linux/platform_data/gpio_backlight.h | 2 +-
include/linux/platform_data/lv5207lp.h | 2 +-
36 files changed, 859 insertions(+), 732 deletions(-)
create mode 100644 drivers/video/fbdev/core/fb_backlight.c
create mode 100644 drivers/video/fbdev/core/fb_devfs.c
create mode 100644 drivers/video/fbdev/core/fb_info.c
create mode 100644 drivers/video/fbdev/core/fb_internal.h
create mode 100644 drivers/video/fbdev/core/fb_procfs.c
--
2.40.1
next reply other threads:[~2023-06-05 14:48 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 14:47 Thomas Zimmermann [this message]
2023-06-05 14:47 ` [PATCH 01/30] backlight/bd6107: Compare against struct fb_info.device Thomas Zimmermann
2023-06-07 7:30 ` Javier Martinez Canillas
2023-06-07 7:34 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 02/30] backlight/gpio_backlight: " Thomas Zimmermann
2023-06-05 20:19 ` Ruhl, Michael J
2023-06-05 20:23 ` Sam Ravnborg
2023-06-05 20:41 ` Ruhl, Michael J
2023-06-06 7:24 ` Thomas Zimmermann
2023-06-06 7:49 ` Dan Carpenter
2023-06-06 8:05 ` Thomas Zimmermann
2023-06-05 14:47 ` [PATCH 03/30] backlight/lv5207lp: " Thomas Zimmermann
2023-06-07 7:35 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 04/30] fbdev/atyfb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 7:36 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 05/30] fbdev/atyfb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 7:41 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 06/30] fbdev/aty128fb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 7:42 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 07/30] fbdev/aty128fb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 7:55 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 08/30] fbdev/broadsheetfb: Call device_remove_file() with hardware device Thomas Zimmermann
2023-06-07 7:55 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 09/30] fbdev/ep93xx-fb: Alloc DMA memory from " Thomas Zimmermann
2023-06-07 8:47 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 10/30] fbdev/ep93xx-fb: Output messages with fb_info() and fb_err() Thomas Zimmermann
2023-06-07 8:59 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 11/30] fbdev/ep93xx-fb: Do not assign to struct fb_info.dev Thomas Zimmermann
2023-06-06 5:26 ` Dan Carpenter
2023-06-07 9:00 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 12/30] fbdev/mb862xxfb: Output messages with fb_dbg() and fb_err() Thomas Zimmermann
2023-06-07 9:00 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 13/30] fbdev/metronomefb: Use hardware device for dev_err() Thomas Zimmermann
2023-06-07 9:01 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 14/30] fbdev/nvidiafb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 9:02 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 15/30] fbdev/nvidiafb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 9:02 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 16/30] fbdev/pxa168fb: Do not assign to struct fb_info.dev Thomas Zimmermann
2023-06-07 9:09 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 17/30] fbdev/radeonfb: Reorder backlight and framebuffer cleanup Thomas Zimmermann
2023-06-07 9:09 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 18/30] fbdev/radeonfb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-06 5:28 ` Dan Carpenter
2023-06-06 7:30 ` Thomas Zimmermann
2023-06-07 9:10 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 19/30] fbdev/rivafb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 9:11 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 20/30] fbdev/rivafb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 9:11 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 21/30] fbdev/sm501fb: Output message with fb_err() Thomas Zimmermann
2023-06-07 9:12 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 22/30] fbdev/smscufx: Detect registered fb_info from refcount Thomas Zimmermann
2023-06-07 22:22 ` Javier Martinez Canillas
2023-06-12 10:19 ` Thomas Zimmermann
2023-06-12 10:40 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 23/30] fbdev/tdfxfb: Set i2c adapter parent to hardware device Thomas Zimmermann
2023-06-07 22:23 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 24/30] fbdev/core: Pass Linux device to pm_vt_switch_*() functions Thomas Zimmermann
2023-06-07 19:25 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 25/30] fbdev/core: Move framebuffer and backlight helpers into separate files Thomas Zimmermann
2023-06-07 19:38 ` Sam Ravnborg
2023-06-09 7:19 ` Thomas Zimmermann
2023-06-05 14:48 ` [PATCH 26/30] fbdev/core: Add fb_device_{create,destroy}() Thomas Zimmermann
2023-06-07 19:45 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 27/30] fbdev/core: Move procfs code to separate file Thomas Zimmermann
2023-06-07 20:33 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 28/30] fbdev/core: Move file-I/O code into " Thomas Zimmermann
2023-06-05 21:35 ` kernel test robot
2023-06-07 20:48 ` Sam Ravnborg
2023-06-12 10:35 ` Thomas Zimmermann
2023-06-07 22:28 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 29/30] fbdev/core: Rework fb init code Thomas Zimmermann
2023-06-07 20:51 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 30/30] fbdev: Make support for userspace interfaces configurable Thomas Zimmermann
2023-06-05 15:03 ` Greg KH
2023-06-05 21:45 ` kernel test robot
2023-06-07 8:48 ` Geert Uytterhoeven
2023-06-07 15:15 ` Thomas Zimmermann
2023-06-07 15:24 ` Geert Uytterhoeven
2023-06-07 23:07 ` Javier Martinez Canillas
2023-06-09 7:09 ` Thomas Zimmermann
2023-06-09 7:29 ` Geert Uytterhoeven
2023-06-09 8:00 ` Thomas Zimmermann
2023-06-09 9:14 ` Geert Uytterhoeven
2023-06-09 11:04 ` Thomas Zimmermann
2023-06-09 11:22 ` Geert Uytterhoeven
2023-06-09 9:59 ` Javier Martinez Canillas
2023-06-09 10:10 ` Geert Uytterhoeven
2023-06-09 10:24 ` Javier Martinez Canillas
2023-06-09 11:27 ` Javier Martinez Canillas
2023-06-11 16:37 ` Sam Ravnborg
2023-06-12 6:47 ` Thomas Zimmermann
2023-06-12 7:00 ` Thomas Zimmermann
2023-06-07 8:35 ` [PATCH 00/30] fbdev: Make userspace interfaces optional Geert Uytterhoeven
2023-06-12 10:46 ` Thomas Zimmermann
[not found] ` <16a8f34a-d4f9-2e1d-02cf-e4c53f89c006@web.de>
2023-06-07 12:21 ` Thomas Zimmermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230605144812.15241-1-tzimmermann@suse.de \
--to=tzimmermann@suse.de \
--cc=daniel.thompson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=javierm@redhat.com \
--cc=jingoohan1@gmail.com \
--cc=lee@kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox