[PATCH net-next 9/9] net: ethernet: ti: am65-cpsw: remove cpsw_ale_classifier_setup_default()

[Roger Quadros <rogerq@kernel.org>]

The RX classifier can now be configured by user using ethtool -N.
So drop cpsw_ale_classifier_setup_default().

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c |  3 --
 drivers/net/ethernet/ti/cpsw_ale.c       | 52 --------------------------------
 drivers/net/ethernet/ti/cpsw_ale.h       |  1 -
 3 files changed, 56 deletions(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 700eb42dd381..12edf2a3bea7 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -2497,9 +2497,6 @@ static int am65_cpsw_nuss_init_rx_chns(struct am65_cpsw_common *common)
 			       am65_cpsw_nuss_rx_poll);
 	}
 
-	/* setup classifier to route priorities to flows */
-	cpsw_ale_classifier_setup_default(common->ale, common->rx_ch_num_flows);
-
 	return 0;
 
 err_flow:
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 48592441085a..6058c0125af4 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -1695,58 +1695,6 @@ void cpsw_ale_policer_reset(struct cpsw_ale *ale)
 		cpsw_ale_policer_reset_entry(ale, i);
 }
 
-/* Default classifier is to map 8 user priorities to N receive channels */
-void cpsw_ale_classifier_setup_default(struct cpsw_ale *ale, int num_rx_ch)
-{
-	int pri, idx;
-
-	/* Reference:
-	 * IEEE802.1Q-2014, Standard for Local and metropolitan area networks
-	 *    Table I-2 - Traffic type acronyms
-	 *    Table I-3 - Defining traffic types
-	 * Section I.4 Traffic types and priority values, states:
-	 * "0 is thus used both for default priority and for Best Effort, and
-	 *  Background is associated with a priority value of 1. This means
-	 * that the value 1 effectively communicates a lower priority than 0."
-	 *
-	 * In the table below, Priority Code Point (PCP) 0 is assigned
-	 * to a higher priority thread than PCP 1 wherever possible.
-	 * The table maps which thread the PCP traffic needs to be
-	 * sent to for a given number of threads (RX channels). Upper threads
-	 * have higher priority.
-	 * e.g. if number of threads is 8 then user priority 0 will map to
-	 * pri_thread_map[8-1][0] i.e. thread 1
-	 */
-
-	int pri_thread_map[8][8] = {   /* BK,BE,EE,CA,VI,VO,IC,NC */
-					{ 0, 0, 0, 0, 0, 0, 0, 0, },
-					{ 0, 0, 0, 0, 1, 1, 1, 1, },
-					{ 0, 0, 0, 0, 1, 1, 2, 2, },
-					{ 0, 0, 1, 1, 2, 2, 3, 3, },
-					{ 0, 0, 1, 1, 2, 2, 3, 4, },
-					{ 1, 0, 2, 2, 3, 3, 4, 5, },
-					{ 1, 0, 2, 3, 4, 4, 5, 6, },
-					{ 1, 0, 2, 3, 4, 5, 6, 7 } };
-
-	cpsw_ale_policer_reset(ale);
-
-	/* use first 8 classifiers to map 8 (DSCP/PCP) priorities to channels */
-	for (pri = 0; pri < 8; pri++) {
-		idx = pri;
-
-		/* Classifier 'idx' match on priority 'pri' */
-		cpsw_ale_policer_read_idx(ale, idx);
-		regmap_field_write(ale->fields[POL_PRI_VAL], pri);
-		regmap_field_write(ale->fields[POL_PRI_MEN], 1);
-		cpsw_ale_policer_write_idx(ale, idx);
-
-		/* Map Classifier 'idx' to thread provided by the map */
-		cpsw_ale_policer_thread_idx_enable(ale, idx,
-						   pri_thread_map[num_rx_ch - 1][pri],
-						   1);
-	}
-}
-
 #define HOST_PORT_NUM 0
 
 /* Clear Policer and associated ALE table entries */
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index dbc095397389..5c9614730998 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -223,7 +223,6 @@ int cpsw_ale_vlan_add_modify(struct cpsw_ale *ale, u16 vid, int port_mask,
 int cpsw_ale_vlan_del_modify(struct cpsw_ale *ale, u16 vid, int port_mask);
 void cpsw_ale_set_unreg_mcast(struct cpsw_ale *ale, int unreg_mcast_mask,
 			      bool add);
-void cpsw_ale_classifier_setup_default(struct cpsw_ale *ale, int num_rx_ch);
 void cpsw_ale_policer_reset(struct cpsw_ale *ale);
 int cpsw_ale_policer_set_entry(struct cpsw_ale *ale, u32 policer_idx,
 			       struct cpsw_ale_policer_cfg *cfg);

-- 
2.34.1