Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: linux@treblig.org
Cc: aaro.koskinen@iki.fi, andreas@kemnade.info, khilman@baylibre.com,
	rogerq@kernel.org, tony@atomide.com, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mfd: twl6030-irq: Remove unused twl6030_mmc_card_detect*
Date: Fri, 13 Jun 2025 15:37:57 +0100	[thread overview]
Message-ID: <20250613143757.GL897353@google.com> (raw)
In-Reply-To: <20250607202232.265344-1-linux@treblig.org>

On Sat, 07 Jun 2025, linux@treblig.org wrote:

> From: "Dr. David Alan Gilbert" <linux@treblig.org>
> 
> twl6030_mmc_card_detect() and twl6030_mmc_card_detect_config() have
> been unused since 2013's
> commit b2ff4790612b ("ARM: OMAP2+: Remove legacy
> omap4_twl6030_hsmmc_init")

This formatting is driving the little OCD being that lives on my
shoulder crazy!  I'll fix-up and apply the patch.  Bear with.

> Remove them.
> 
> Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
> ---
>  drivers/mfd/twl6030-irq.c | 74 ---------------------------------------
>  include/linux/mfd/twl.h   | 21 -----------
>  2 files changed, 95 deletions(-)
> 
> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
> index 00b14cef1dfb..ffb4b98639c7 100644
> --- a/drivers/mfd/twl6030-irq.c
> +++ b/drivers/mfd/twl6030-irq.c
> @@ -256,80 +256,6 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
>  }
>  EXPORT_SYMBOL(twl6030_interrupt_mask);
>  
> -int twl6030_mmc_card_detect_config(void)
> -{
> -	int ret;
> -	u8 reg_val = 0;
> -
> -	/* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
> -	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> -						REG_INT_MSK_LINE_B);
> -	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> -						REG_INT_MSK_STS_B);
> -	/*
> -	 * Initially Configuring MMC_CTRL for receiving interrupts &
> -	 * Card status on TWL6030 for MMC1
> -	 */
> -	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
> -	if (ret < 0) {
> -		pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
> -		return ret;
> -	}
> -	reg_val &= ~VMMC_AUTO_OFF;
> -	reg_val |= SW_FC;
> -	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
> -	if (ret < 0) {
> -		pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
> -		return ret;
> -	}
> -
> -	/* Configuring PullUp-PullDown register */
> -	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
> -						TWL6030_CFG_INPUT_PUPD3);
> -	if (ret < 0) {
> -		pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
> -									ret);
> -		return ret;
> -	}
> -	reg_val &= ~(MMC_PU | MMC_PD);
> -	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
> -						TWL6030_CFG_INPUT_PUPD3);
> -	if (ret < 0) {
> -		pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
> -									ret);
> -		return ret;
> -	}
> -
> -	return irq_find_mapping(twl6030_irq->irq_domain,
> -				 MMCDETECT_INTR_OFFSET);
> -}
> -EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
> -
> -int twl6030_mmc_card_detect(struct device *dev, int slot)
> -{
> -	int ret = -EIO;
> -	u8 read_reg = 0;
> -	struct platform_device *pdev = to_platform_device(dev);
> -
> -	if (pdev->id) {
> -		/* TWL6030 provide's Card detect support for
> -		 * only MMC1 controller.
> -		 */
> -		pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
> -		return ret;
> -	}
> -	/*
> -	 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
> -	 * 0 - Card not present ,1 - Card present
> -	 */
> -	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
> -						TWL6030_MMCCTRL);
> -	if (ret >= 0)
> -		ret = read_reg & STS_MMC;
> -	return ret;
> -}
> -EXPORT_SYMBOL(twl6030_mmc_card_detect);
> -
>  static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
>  			      irq_hw_number_t hwirq)
>  {
> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
> index 85dc406173db..b31e07fa4d51 100644
> --- a/include/linux/mfd/twl.h
> +++ b/include/linux/mfd/twl.h
> @@ -205,27 +205,6 @@ int twl_get_hfclk_rate(void);
>  int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
>  int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
>  
> -/* Card detect Configuration for MMC1 Controller on OMAP4 */
> -#ifdef CONFIG_TWL4030_CORE
> -int twl6030_mmc_card_detect_config(void);
> -#else
> -static inline int twl6030_mmc_card_detect_config(void)
> -{
> -	pr_debug("twl6030_mmc_card_detect_config not supported\n");
> -	return 0;
> -}
> -#endif
> -
> -/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> -#ifdef CONFIG_TWL4030_CORE
> -int twl6030_mmc_card_detect(struct device *dev, int slot);
> -#else
> -static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
> -{
> -	pr_debug("Call back twl6030_mmc_card_detect not supported\n");
> -	return -EIO;
> -}
> -#endif
>  /*----------------------------------------------------------------------*/
>  
>  /*
> -- 
> 2.49.0
> 

-- 
Lee Jones [李琼斯]

  reply	other threads:[~2025-06-13 14:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-07 20:22 [PATCH] mfd: twl6030-irq: Remove unused twl6030_mmc_card_detect* linux
2025-06-13 14:37 ` Lee Jones [this message]
2025-06-13 15:27   ` Dr. David Alan Gilbert
2025-06-19 11:51     ` Lee Jones
2025-06-13 14:39 ` (subset) " Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250613143757.GL897353@google.com \
    --to=lee@kernel.org \
    --cc=aaro.koskinen@iki.fi \
    --cc=andreas@kemnade.info \
    --cc=khilman@baylibre.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@treblig.org \
    --cc=rogerq@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox