Re: [PATCH v2 01/20] dt-bindings: display: tilcdc: Convert to DT schema

[Krzysztof Kozlowski <krzk@kernel.org>]

On Thu, Dec 11, 2025 at 05:38:45PM +0100, Kory Maincent (TI.com) wrote:
> diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.yaml b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.yaml
> new file mode 100644
> index 0000000000000..34ac1fd04d5c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.yaml

Filename based on compatible, so for example ti,am33xx-tilcdc.yaml or
worse case ti,tilcdc.yaml (see writing bindings and writing schema docs)


> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/tilcdc/tilcdc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI LCD Controller, found on AM335x, DA850, AM18x and OMAP-L138
> +
> +maintainers:
> +  - Kory Maincent <kory.maincent@bootlin.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,am33xx-tilcdc
> +      - ti,da850-tilcdc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +
> +  ti,hwmods:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Name of the hwmod associated to the LCDC
> +
> +  max-bandwidth:

constraints? Is '1' valid? Is INT_MAX valid as well?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The maximum pixels per second that the memory interface / lcd
> +      controller combination can sustain
> +
> +  max-width:
> +    $ref: /schemas/types.yaml#/definitions/uint32

constraints?

> +    description:
> +      The maximum horizontal pixel width supported by the lcd controller.
> +
> +  max-pixelclock:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The maximum pixel clock that can be supported by the lcd controller
> +      in KHz.
> +
> +  blue-and-red-wiring:
> +    enum: [straight, crossed]
> +    description:
> +      This property deals with the LCDC revision 2 (found on AM335x)
> +      color errata [1].
> +       - "straight" indicates normal wiring that supports RGB565,
> +         BGR888, and XBGR8888 color formats.
> +       - "crossed" indicates wiring that has blue and red wires
> +         crossed. This setup supports BGR565, RGB888 and XRGB8888
> +         formats.
> +       - If the property is not present or its value is not recognized
> +         the legacy mode is assumed. This configuration supports RGB565,
> +         RGB888 and XRGB8888 formats. However, depending on wiring, the red
> +         and blue colors are swapped in either 16 or 24-bit color modes.
> +
> +       [1] There is an errata about AM335x color wiring. For 16-bit color
> +       mode the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
> +       but for 24 bit color modes the wiring of blue and red components is
> +       crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
> +       for Blue[3-7]. For more details see section 3.1.1 in AM335x
> +       Silicon Errata
> +       https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
> +
> +required:
> +  - compatible
> +  - interrupts
> +  - reg
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    tilcdc: tilcdc@4830e000 {

Drop unused label. Generic node name, e.g. "display-controller" or
"lcd-controller".


Best regards,
Krzysztof