From: Hans Zhang <18255117159@163.com>
To: bhelgaas@google.com, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, vigneshr@ti.com,
jingoohan1@gmail.com, thomas.petazzoni@bootlin.com,
pali@kernel.org, ryder.lee@mediatek.com,
claudiu.beznea.uj@bp.renesas.com, mpillai@cadence.com
Cc: robh@kernel.org, s-vadapalli@ti.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, claudiu.beznea@tuxon.dev,
linux-mediatek@lists.infradead.org,
linux-renesas-soc@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, Hans Zhang <18255117159@163.com>
Subject: [PATCH v3 2/7] PCI: cadence: Add post-link delay for LGA and j721e glue driver
Date: Mon, 11 May 2026 13:59:18 +0800 [thread overview]
Message-ID: <20260511055923.37117-3-18255117159@163.com> (raw)
In-Reply-To: <20260511055923.37117-1-18255117159@163.com>
The Cadence LGA (Legacy Architecture IP) PCIe host controller currently
lacks the mandatory 100 ms delay after link training completes for speeds
> 5.0 GT/s, as required by PCIe r6.0 sec 6.6.1.
Add a 'max_link_speed' field to struct cdns_pcie. In the common host
layer function cdns_pcie_host_start_link(), after the link has been
successfully established, call pci_host_common_link_train_delay() to
insert the required delay.
For the j721e glue driver, set cdns_pcie.max_link_speed from the existing
link speed logic. For other LGA-based glue drivers (sky1, sg2042), the
common LGA host setup (pcie-cadence-host.c) provides a fallback reading
of the device tree property "max-link-speed" when available. This ensures
that the delay is not missed on those platforms once they enable the
property.
Signed-off-by: Hans Zhang <18255117159@163.com>
---
drivers/pci/controller/cadence/pci-j721e.c | 1 +
drivers/pci/controller/cadence/pcie-cadence-host-common.c | 4 ++++
drivers/pci/controller/cadence/pcie-cadence-host.c | 4 ++++
drivers/pci/controller/cadence/pcie-cadence.h | 2 ++
4 files changed, 11 insertions(+)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index bfdfe98d5aba..ee85b8e04f5b 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -206,6 +206,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
(pcie_get_link_speed(link_speed) == PCI_SPEED_UNKNOWN))
link_speed = 2;
+ pcie->cdns_pcie.max_link_speed = link_speed;
val = link_speed - 1;
ret = regmap_update_bits(syscon, offset, GENERATION_SEL_MASK, val);
if (ret)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host-common.c b/drivers/pci/controller/cadence/pcie-cadence-host-common.c
index 2b0211870f02..18e4b6c760b5 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host-common.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host-common.c
@@ -14,6 +14,7 @@
#include "pcie-cadence.h"
#include "pcie-cadence-host-common.h"
+#include "../pci-host-common.h"
#define LINK_RETRAIN_TIMEOUT HZ
@@ -115,6 +116,9 @@ int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc,
if (!ret && rc->quirk_retrain_flag)
ret = cdns_pcie_retrain(pcie, pcie_link_up);
+ if (!ret)
+ pci_host_common_link_train_delay(pcie->max_link_speed);
+
return ret;
}
EXPORT_SYMBOL_GPL(cdns_pcie_host_start_link);
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 0bc9e6e90e0e..058e4e619654 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -13,6 +13,7 @@
#include "pcie-cadence.h"
#include "pcie-cadence-host-common.h"
+#include "../../pci.h"
static u8 bar_aperture_mask[] = {
[RP_BAR0] = 0x1F,
@@ -397,6 +398,9 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
rc->device_id = 0xffff;
of_property_read_u32(np, "device-id", &rc->device_id);
+ if (pcie->max_link_speed < 1)
+ pcie->max_link_speed = of_pci_get_max_link_speed(np);
+
pcie->reg_base = devm_platform_ioremap_resource_byname(pdev, "reg");
if (IS_ERR(pcie->reg_base)) {
dev_err(dev, "missing \"reg\"\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 574e9cf4d003..042a4c49bb9a 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -86,6 +86,7 @@ struct cdns_plat_pcie_of_data {
* @ops: Platform-specific ops to control various inputs from Cadence PCIe
* wrapper
* @cdns_pcie_reg_offsets: Register bank offsets for different SoC
+ * @max_link_speed: Maximum supported link speed
*/
struct cdns_pcie {
void __iomem *reg_base;
@@ -98,6 +99,7 @@ struct cdns_pcie {
struct device_link **link;
const struct cdns_pcie_ops *ops;
const struct cdns_plat_pcie_of_data *cdns_pcie_reg_offsets;
+ int max_link_speed;
};
/**
--
2.34.1
next prev parent reply other threads:[~2026-05-11 6:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 5:59 [PATCH v3 0/7] PCI: Add common helper for 100 ms delay after link training Hans Zhang
2026-05-11 5:59 ` [PATCH v3 1/7] PCI: Add pci_host_common_link_train_delay() helper Hans Zhang
2026-05-11 5:59 ` Hans Zhang [this message]
2026-05-11 5:59 ` [PATCH v3 3/7] PCI: cadence: HPA: Add post-link delay Hans Zhang
2026-05-11 5:59 ` [PATCH v3 4/7] PCI: dwc: Use common pci_host_common_link_train_delay() helper Hans Zhang
2026-05-11 7:02 ` Krzysztof Wilczyński
2026-05-11 5:59 ` [PATCH v3 5/7] PCI: aardvark: Add 100 ms delay after link training Hans Zhang
2026-05-11 5:59 ` [PATCH v3 6/7] PCI: mediatek-gen3: Add 100 ms delay after link up Hans Zhang
2026-05-11 5:59 ` [PATCH v3 7/7] PCI: rzg3s-host: Use common pci_host_common_link_train_delay() helper Hans Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260511055923.37117-3-18255117159@163.com \
--to=18255117159@163.com \
--cc=bhelgaas@google.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=jingoohan1@gmail.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mpillai@cadence.com \
--cc=pali@kernel.org \
--cc=robh@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=s-vadapalli@ti.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox