From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>, Sen Wang <sen@ti.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Jarkko Nikula <jarkko.nikula@bitmer.com>,
linux-omap@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-sound@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 10/10] ASoC: ti: rx51: Use dev_err_probe() for error handling
Date: Tue, 14 Jul 2026 19:00:42 +0700 [thread overview]
Message-ID: <20260714120042.491712-11-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260714120042.491712-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Replace dev_err() with dev_err_probe() when reporting probe
failures. This preserves the original error code and suppresses
unnecessary log messages for deferred probe errors.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/ti/rx51.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/sound/soc/ti/rx51.c b/sound/soc/ti/rx51.c
index cfc23e0838c2..46053b8f3202 100644
--- a/sound/soc/ti/rx51.c
+++ b/sound/soc/ti/rx51.c
@@ -418,31 +418,27 @@ static int rx51_soc_probe(struct platform_device *pdev)
pdata->tvout_selection_gpio = devm_gpiod_get(card->dev,
"tvout-selection",
GPIOD_OUT_LOW);
- if (IS_ERR(pdata->tvout_selection_gpio)) {
- dev_err(card->dev, "could not get tvout selection gpio\n");
- return PTR_ERR(pdata->tvout_selection_gpio);
- }
+ if (IS_ERR(pdata->tvout_selection_gpio))
+ return dev_err_probe(card->dev, PTR_ERR(pdata->tvout_selection_gpio),
+ "could not get tvout selection gpio\n");
pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch",
GPIOD_OUT_HIGH);
- if (IS_ERR(pdata->eci_sw_gpio)) {
- dev_err(card->dev, "could not get eci switch gpio\n");
- return PTR_ERR(pdata->eci_sw_gpio);
- }
+ if (IS_ERR(pdata->eci_sw_gpio))
+ return dev_err_probe(card->dev, PTR_ERR(pdata->eci_sw_gpio),
+ "could not get eci switch gpio\n");
pdata->speaker_amp_gpio = devm_gpiod_get(card->dev,
"speaker-amplifier",
GPIOD_OUT_LOW);
- if (IS_ERR(pdata->speaker_amp_gpio)) {
- dev_err(card->dev, "could not get speaker enable gpio\n");
- return PTR_ERR(pdata->speaker_amp_gpio);
- }
+ if (IS_ERR(pdata->speaker_amp_gpio))
+ return dev_err_probe(card->dev, PTR_ERR(pdata->speaker_amp_gpio),
+ "could not get speaker enable gpio\n");
err = devm_snd_soc_register_card(card->dev, card);
- if (err) {
- dev_err(card->dev, "snd_soc_register_card failed (%d)\n", err);
- return err;
- }
+ if (err)
+ return dev_err_probe(card->dev, err,
+ "snd_soc_register_card failed\n");
return 0;
}
--
2.43.0
prev parent reply other threads:[~2026-07-14 12:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-14 12:00 [PATCH 00/10] ASoC: ti: Improve probe error handling phucduc.bui
2026-07-14 12:00 ` [PATCH 01/10] ASoC: ti: ams-delta: Use dev_err_probe() for " phucduc.bui
2026-07-14 12:27 ` Christophe JAILLET
2026-07-14 12:00 ` [PATCH 02/10] ASoC: ti: davinci-evm: " phucduc.bui
2026-07-14 12:27 ` Christophe JAILLET
2026-07-14 12:29 ` Christophe JAILLET
2026-07-14 12:00 ` [PATCH 03/10] ASoC: ti: j721e-evm: Return the original error from card name parsing phucduc.bui
2026-07-14 12:00 ` [PATCH 04/10] ASoC: ti: omap-abe-twl6040: Preserve error code and drop redundant log phucduc.bui
2026-07-14 12:00 ` [PATCH 05/10] ASoC: ti: omap-abe-twl6040: Use dev_err_probe() for error handling phucduc.bui
2026-07-14 12:00 ` [PATCH 06/10] ASoC: ti: omap-dmic: " phucduc.bui
2026-07-14 12:00 ` [PATCH 07/10] ASoC: ti: omap-hdmi: " phucduc.bui
2026-07-14 12:00 ` [PATCH 08/10] ASoC: ti: omap-twl4030: Return the original error code phucduc.bui
2026-07-14 12:00 ` [PATCH 09/10] ASoC: ti: omap-twl4030: Use dev_err_probe() for error handling phucduc.bui
2026-07-14 12:00 ` phucduc.bui [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260714120042.491712-11-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=broonie@kernel.org \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sen@ti.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox