Re: [EXTERNAL] Re: [PATCH v4 1/2] dt-bindings: net: Add ICSSG Ethernet Driver bindings

[Md Danish Anwar <a0501179@ti.com>]

Hi Rob,

On 06/02/23 19:16, Rob Herring wrote:
> 
> On Mon, 06 Feb 2023 11:37:07 +0530, MD Danish Anwar wrote:
>> From: Puranjay Mohan <p-mohan@ti.com>
>>
>> Add a YAML binding document for the ICSSG Programmable real time unit
>> based Ethernet driver. This driver uses the PRU and PRUSS consumer APIs
>> to interface the PRUs and load/run the firmware for supporting ethernet
>> functionality.
>>
>> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
>> Signed-off-by: Md Danish Anwar <danishanwar@ti.com>
>> ---
>>  .../bindings/net/ti,icssg-prueth.yaml         | 179 ++++++++++++++++++
>>  1 file changed, 179 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> ./Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml

This error is coming because this series depends on series [1]. The
ti,pru-consumer.yaml is upstreamed through series [1]. The series is approved
and will hopefully be merged soon.

[1] https://lore.kernel.org/all/20230106121046.886863-1-danishanwar@ti.com/

> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.example.dtb: ethernet: False schema does not allow {'compatible': ['ti,am654-icssg-prueth'], 'pinctrl-names': ['default'], 'pinctrl-0': [[4294967295]], 'ti,sram': [[4294967295]], 'ti,prus': [[4294967295, 4294967295, 4294967295, 4294967295, 4294967295, 4294967295]], 'firmware-name': ['ti-pruss/am65x-pru0-prueth-fw.elf', 'ti-pruss/am65x-rtu0-prueth-fw.elf', 'ti-pruss/am65x-txpru0-prueth-fw.elf', 'ti-pruss/am65x-pru1-prueth-fw.elf', 'ti-pruss/am65x-rtu1-prueth-fw.elf', 'ti-pruss/am65x-txpru1-prueth-fw.elf'], 'ti,pruss-gp-mux-sel': [[2, 2, 2, 2, 2, 2]], 'dmas': [[4294967295, 49920], [4294967295, 49921], [4294967295, 49922], [4294967295, 49923], [4294967295, 49924], [4294967295, 49925], [4294967295, 49926], [4294967295, 49927], [4294967295, 17152], [4294967295, 17153]], 'dma-names': ['tx0-0', 'tx0-1', 'tx0-2', 'tx0-3', 'tx1-0', 'tx1-1', 'tx1-2', 'tx1-3', 'rx0', 'rx1'], 'ti,mii-g-rt': [[429!
>  4967295]], 'interrupts': [[24, 0, 2], [25, 1, 3]], 'interrupt-names': ['tx_ts0', 'tx_ts1'], 'ethernet-ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'phy-handle': [[4294967295]], 'phy-mode': ['rgmii-id'], 'interrupts-extended': [[4294967295, 24]], 'ti,syscon-rgmii-delay': [[4294967295, 16672]], 'local-mac-address': [[0, 0, 0, 0, 0, 0]]}, 'port@1': {'reg': [[1]], 'phy-handle': [[4294967295]], 'phy-mode': ['rgmii-id'], 'interrupts-extended': [[4294967295, 25]], 'ti,syscon-rgmii-delay': [[4294967295, 16676]], 'local-mac-address': [[0, 0, 0, 0, 0, 0]]}}, '$nodename': ['ethernet']}
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.example.dtb: ethernet: Unevaluated properties are not allowed ('firmware-name', 'ti,prus', 'ti,pruss-gp-mux-sel' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230206060708.3574472-2-danishanwar@ti.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

-- 
Thanks and Regards,
Danish.