linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: linux-omap@vger.kernel.org, tony@atomide.com, sre@kernel.org,
	pali.rohar@gmail.com, linux-media@vger.kernel.org
Subject: Re: [PATCH 2/4] dt: bindings: Add bindings for omap3isp
Date: Mon, 16 Mar 2015 02:14:07 +0200	[thread overview]
Message-ID: <3350721.RUNgWzh7DN@avalon> (raw)
In-Reply-To: <1426464080-29119-3-git-send-email-sakari.ailus@iki.fi>

Hi Sakari,

Thank you for the patch.

On Monday 16 March 2015 02:01:18 Sakari Ailus wrote:
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
>  .../devicetree/bindings/media/ti,omap3isp.txt      |   71 +++++++++++++++++
>  MAINTAINERS                                        |    1 +
>  include/dt-bindings/media/omap3-isp.h              |   22 ++++++
>  3 files changed, 94 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/ti,omap3isp.txt
>  create mode 100644 include/dt-bindings/media/omap3-isp.h
> 
> diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt
> b/Documentation/devicetree/bindings/media/ti,omap3isp.txt new file mode
> 100644
> index 0000000..547b493
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
> @@ -0,0 +1,71 @@
> +OMAP 3 ISP Device Tree bindings
> +===============================
> +
> +The DT definitions can be found in include/dt-bindings/media/omap3-isp.h.
> +
> +Required properties
> +===================
> +
> +compatible	: must contain "ti,omap3-isp"
> +
> +reg		: the two registers sets (physical address and length) for the
> +		  ISP. The first set contains the core ISP registers up to
> +		  the end of the SBL block. The second set contains the
> +		  CSI PHYs and receivers registers.
> +interrupts	: the ISP interrupt specifier
> +iommus		: phandle and IOMMU specifier for the IOMMU that serves the ISP
> +syscon		: the phandle and register offset to the Complex I/O or CSI-PHY
> +		  register
> +ti,phy-type	: 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430)
> +		  1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630)
> +#clock-cells	: Must be 1 --- the ISP provides two external clocks,
> +		  cam_xclka and cam_xclkb, at indices 0 and 1,
> +		  respectively. Please find more information on common
> +		  clock bindings in ../clock/clock-bindings.txt.
> +
> +Port nodes (optional)
> +---------------------
> +
> +More documentation on these bindings is available in
> +video-interfaces.txt in the same directory.
> +
> +reg		: The interface:
> +		  0 - parallel (CCDC)
> +		  1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
> +		      CSI1 -- CSIb on 3430
> +		  2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
> +		      CSI2 -- CSIa on 3430
> +
> +Optional properties
> +===================
> +
> +vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
> +vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
> +
> +Endpoint nodes
> +--------------
> +
> +lane-polarity	: lane polarity (required on CSI-2)
> +		  0 -- not inverted; 1 -- inverted
> +data-lanes	: an array of data lanes from 1 to 3. The length can
> +		  be either 1 or 2. (required on CSI-2)
> +clock-lanes	: the clock lane (from 1 to 3). (required on CSI-2)
> +
> +
> +Example
> +=======
> +
> +		isp@480bc000 {
> +			compatible = "ti,omap3-isp";
> +			reg = <0x480bc000 0x12fc
> +			       0x480bd800 0x0600>;
> +			interrupts = <24>;
> +			iommus = <&mmu_isp>;
> +			syscon = <&omap3_scm_general 0x2f0>;
> +			ti,phy-type = <1>;

I would use OMAP3ISP_PHY_TYPE_CSIPHY instead of 1 here. Apart from that,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +			#clock-cells = <1>;
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index af8df65..a102624 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6949,6 +6949,7 @@ OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
>  M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/media/ti,omap3isp.txt
>  F:	drivers/media/platform/omap3isp/
>  F:	drivers/staging/media/omap4iss/
> 
> diff --git a/include/dt-bindings/media/omap3-isp.h
> b/include/dt-bindings/media/omap3-isp.h new file mode 100644
> index 0000000..b18c60e
> --- /dev/null
> +++ b/include/dt-bindings/media/omap3-isp.h
> @@ -0,0 +1,22 @@
> +/*
> + * include/dt-bindings/media/omap3-isp.h
> + *
> + * Copyright (C) 2015 Sakari Ailus
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + */
> +
> +#ifndef __DT_BINDINGS_OMAP3_ISP_H__
> +#define __DT_BINDINGS_OMAP3_ISP_H__
> +
> +#define OMAP3ISP_PHY_TYPE_COMPLEX_IO	0
> +#define OMAP3ISP_PHY_TYPE_CSIPHY	1
> +
> +#endif /* __DT_BINDINGS_OMAP3_ISP_H__ */

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2015-03-16  0:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-16  0:01 [PATCH 0/4] OMAP 3 ISP (and N9/N950 primary camera support) dts changes Sakari Ailus
2015-03-16  0:01 ` [PATCH 1/4] arm: dts: omap3: Extend the syscon register range Sakari Ailus
2015-03-16  0:16   ` Laurent Pinchart
2015-03-16  0:01 ` [PATCH 2/4] dt: bindings: Add bindings for omap3isp Sakari Ailus
2015-03-16  0:14   ` Laurent Pinchart [this message]
2015-03-16  0:01 ` [PATCH 3/4] arm: dts: omap3: Add DT entries for OMAP 3 Sakari Ailus
2015-03-16  0:12   ` Laurent Pinchart
2015-03-16  0:01 ` [PATCH 4/4] arm: dts: n950, n9: Add primary camera support Sakari Ailus
2015-03-16  0:12   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3350721.RUNgWzh7DN@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=sakari.ailus@iki.fi \
    --cc=sre@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).