From: "Li Weichen" <iaadoa@gmail.com>
To: 'Yves Godin' <Yves.Godin@lyrtech.com>,
'xuxian' <lsfdxuxian@gmail.com>,
'Tony Lindgren' <tony@atomide.com>,
'Jose Manuel Cano Garcia' <jcgarcia@uma.es>
Cc: 'Linux OMAP Open Source' <linux-omap-open-source@linux.omap.com>
Subject: RE: OSK5912 USB Port Problem
Date: Tue, 22 Nov 2005 21:40:40 +0800 [thread overview]
Message-ID: <43831ff9.42d4ae2b.279a.7ed0@mx.gmail.com> (raw)
In-Reply-To: <42848A5C5A0D1E47B026E644DD49B08E683DA7@mail>
Doesn't the OSK support OTG?
> -----Original Message-----
> From: Yves Godin [mailto:Yves.Godin@lyrtech.com]
> Sent: Tuesday, November 22, 2005 9:31 PM
> To: Li Weichen; xuxian; Tony Lindgren; Jose Manuel Cano Garcia
> Cc: Linux OMAP Open Source
> Subject: RE: OSK5912 USB Port Problem
>
> Hi,
> I did not follow all the thread but if I'm correct, when you enable
the
> Gadget support in the Kernel for the OSK, the USB can no longer be used as
a
> Master.
>
> Regards,
>
> -Yves
>
> -----Message d'origine-----
> De : linux-omap-open-source-bounces@linux.omap.com
> [mailto:linux-omap-open-source-bounces@linux.omap.com] De la part de Li
> Weichen
> Envoyé : Tuesday, November 22, 2005 3:15 AM
> À : 'xuxian'; 'Tony Lindgren'; 'Jose Manuel Cano Garcia'
> Cc : 'Linux OMAP Open Source'
> Objet : RE: OSK5912 USB Port Problem
>
> Well I encounter another problem. If I only enable the usb host support,
> the usb Flash disk works well with OSK. But after I add the USB Gadget
> support, and enables the OTG, the Flash disk doesn't work.
>
> Is there anything wrong with OTG?
>
> > -----Original Message-----
> > From: linux-omap-open-source-bounces+iaadoa=gmail.com@linux.omap.com
> > [mailto:linux-omap-open-source-bounces+iaadoa=gmail.com@linux.omap.com]
> On
> > Behalf Of xuxian
> > Sent: Tuesday, November 22, 2005 11:22 AM
> > To: 'Tony Lindgren'; 'Jose Manuel Cano Garcia'
> > Cc: 'Linux OMAP Open Source'
> > Subject: RE: OSK5912 USB Port Problem
> >
> > Hi Tony,
> >
> > The patch work. Now the OSK can detect the USB key automatically.
> > Thanks much.
> >
> > xuxian
> >
> > -----Original Message-----
> > From: linux-omap-open-source-bounces+lsfdxuxian=gmail.com@linux.omap.com
> >
> [mailto:linux-omap-open-source-bounces+lsfdxuxian=gmail.com@linux.omap.com
> > ]
> > On Behalf Of Tony Lindgren
> > Sent: Tuesday, November 22, 2005 1:49 AM
> > To: Jose Manuel Cano Garcia
> > Cc: Linux OMAP Open Source
> > Subject: Re: OSK5912 USB Port Problem
> >
> > * Jose Manuel Cano Garcia <jcgarcia@uma.es> [051121 02:14]:
> > > Hi,
> > >
> > > I had problems with an USB flash memory, too. I tried several
solutions
> > > and kernels which did not work until I recently read a post on the
Linux
> > > Omap mailing list regarding USB clock malfunction on kernels
> > > 2.6.12-2.6.14 (which were the ones I have tried). Then, I tried kernel
> > > 2.6.11 an it worked.
> >
> > I've noticed that having CONFIG_OMAP_RESET_CLOCKS on kills OHCI at least
> > on OSK. Juha's patch from few months ago probably helps with that as it
> > turns on dc_clk:
> >
> >
> http://linux.omap.com/pipermail/linux-omap-open-source/2005-August/004818.
> > ht
> > ml
> >
> > Can you please check if it's caused by this combination? We should get
> > Juha's patch integrated...
> >
> > Tony
> > _______________________________________________
> > Linux-omap-open-source mailing list
> > Linux-omap-open-source@linux.omap.com
> > http://linux.omap.com/mailman/listinfo/linux-omap-open-source
> >
> > _______________________________________________
> > Linux-omap-open-source mailing list
> > Linux-omap-open-source@linux.omap.com
> > http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
next prev parent reply other threads:[~2005-11-22 13:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-22 13:30 OSK5912 USB Port Problem Yves Godin
2005-11-22 13:40 ` Li Weichen [this message]
[not found] <437d78ad.1c0496aa.28bc.29a8@mx.gmail.com>
2005-11-20 22:12 ` Matthew Percival
2005-11-21 10:14 ` Jose Manuel Cano Garcia
2005-11-21 17:49 ` Tony Lindgren
2005-11-21 18:51 ` Jose Manuel Cano Garcia
2005-11-21 22:14 ` Matthew Percival
2005-11-21 23:56 ` Tony Lindgren
2005-11-22 3:21 ` xuxian
2005-11-22 8:15 ` Li Weichen
2005-11-24 12:45 ` Jose Manuel Cano Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43831ff9.42d4ae2b.279a.7ed0@mx.gmail.com \
--to=iaadoa@gmail.com \
--cc=Yves.Godin@lyrtech.com \
--cc=jcgarcia@uma.es \
--cc=linux-omap-open-source@linux.omap.com \
--cc=lsfdxuxian@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox