* Convert input devices to input_allocate_device
@ 2005-11-22 19:46 Dirk Behme
2005-11-22 21:49 ` Dirk Behme
2005-11-28 9:54 ` [PATCH] " Dirk Behme
0 siblings, 2 replies; 4+ messages in thread
From: Dirk Behme @ 2005-11-22 19:46 UTC (permalink / raw)
To: linux-omap-open-source
[-- Attachment #1: Type: text/plain, Size: 977 bytes --]
Hi,
while loading omapts and omap-keypad drivers as modules in
2.6.15-rc1-omap1 I get:
input: device omap-keypad is statically allocated, will not register
Please convert to input_allocate_device() or contact dtor_core@ameritech.net
input: device omap_ts is statically allocated, will not register
Please convert to input_allocate_device() or contact dtor_core@ameritech.net
Converting them to input_allocate_device() (patch in the attachment)
results in clean loading:
OMAP Keypad Driver
MUX: initialized N14_1610_UWIRE_CS0
MUX: initialized P15_1610_UWIRE_CS3
MUX: initialized P20_1610_GPIO4
input: omap_ts as /class/input/input0
OMAP touchscreen driver initialized
But then ts_calibrate doesn't want to open touchscreen driver:
# ts_calibrate
ts_open: No such device
My standard TS configuration (worked quite good with the old
configuration) is:
./profile:4:export TSLIB_TSDEVICE='/dev/input/event1'
./ts.conf:2:module_raw input
Any ideas?
Thanks
Dirk
[-- Attachment #2: input_allocate_device.patch --]
[-- Type: text/plain, Size: 5171 bytes --]
--- ./drivers/input/touchscreen/omap/omap_ts.c_orig 2005-11-22 20:14:23.258389432 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.c 2005-11-22 20:20:24.437481864 +0100
@@ -65,10 +65,10 @@ static int omap_ts_read(void)
ts_omap.dev->read(data);
- input_report_abs(&(ts_omap.inputdevice), ABS_X, data[0]);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, data[1]);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE, data[2]);
- input_sync(&(ts_omap.inputdevice));
+ input_report_abs(ts_omap.inputdevice, ABS_X, data[0]);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, data[1]);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE, data[2]);
+ input_sync(ts_omap.inputdevice);
DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1],
data[2]);
@@ -85,7 +85,7 @@ static void omap_ts_timer(unsigned long
if (!ts_omap.dev->penup()) {
if (!ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen down\n");
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 1);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 1);
}
ts_omap.touched = 1;
omap_ts_read();
@@ -95,12 +95,12 @@ static void omap_ts_timer(unsigned long
if (ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen up\n");
ts_omap.touched = 0;
- input_report_abs(&(ts_omap.inputdevice), ABS_X, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE,
+ input_report_abs(ts_omap.inputdevice, ABS_X, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE,
0);
- input_sync(&(ts_omap.inputdevice));
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 0);
+ input_sync(ts_omap.inputdevice);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 0);
}
if (!ts_omap.irq_enabled) {
ts_omap.irq_enabled = 1;
@@ -168,14 +168,14 @@ static int __init omap_ts_probe(struct d
return -EINVAL;
}
- init_input_dev(&(ts_omap.inputdevice));
- ts_omap.inputdevice.name = OMAP_TS_NAME;
- ts_omap.inputdevice.dev = dev;
- ts_omap.inputdevice.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- ts_omap.inputdevice.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts_omap.inputdevice.absbit[0] =
+ ts_omap.inputdevice = input_allocate_device();
+ ts_omap.inputdevice->name = OMAP_TS_NAME;
+ ts_omap.inputdevice->dev = dev;
+ ts_omap.inputdevice->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ ts_omap.inputdevice->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ ts_omap.inputdevice->absbit[0] =
BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- input_register_device(&(ts_omap.inputdevice));
+ input_register_device(ts_omap.inputdevice);
ts_omap.dev->enable();
@@ -187,7 +187,7 @@ static int __init omap_ts_probe(struct d
static int __exit omap_ts_remove(struct device *dev)
{
ts_omap.dev->disable();
- input_unregister_device(&ts_omap.inputdevice);
+ input_unregister_device(ts_omap.inputdevice);
if (ts_omap.irq != -1)
free_irq(ts_omap.irq, &ts_omap);
--- ./drivers/input/touchscreen/omap/omap_ts.h_orig 2005-11-22 19:47:37.137556912 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.h 2005-11-22 20:09:03.938933368 +0100
@@ -42,7 +42,7 @@ struct ts_device {
};
struct omap_ts_t{
- struct input_dev inputdevice;
+ struct input_dev * inputdevice;
struct timer_list ts_timer; // Timer for triggering acquisitions
int touched;
int irq;
--- ./drivers/input/keyboard/omap-keypad.c_orig 2005-11-22 20:17:15.222246952 +0100
+++ ./drivers/input/keyboard/omap-keypad.c 2005-11-22 20:20:56.918543992 +0100
@@ -44,7 +44,7 @@
static void omap_kp_tasklet(unsigned long);
static void omap_kp_timer(unsigned long);
-static struct input_dev omap_kp_dev;
+static struct input_dev * omap_kp_dev;
static unsigned char keypad_state[8];
static unsigned int keypad_irq = INT_KEYBOARD;
@@ -246,7 +246,7 @@ static void omap_kp_tasklet(unsigned lon
continue;
}
- input_report_key(&omap_kp_dev, key,
+ input_report_key(omap_kp_dev, key,
new_state[col] & (1 << row));
#endif
}
@@ -277,7 +277,7 @@ static int __init omap_kp_init(void)
if (machine_is_omap_h2() || machine_is_omap_h3()) {
keymap = h2_keymap;
- set_bit(EV_REP, omap_kp_dev.evbit);
+ set_bit(EV_REP, omap_kp_dev->evbit);
} else if (machine_is_omap_innovator()) {
keymap = innovator_keymap;
} else if (machine_is_omap_osk()) {
@@ -299,11 +299,11 @@ static int __init omap_kp_init(void)
return -EINVAL;
/* setup input device */
- set_bit(EV_KEY, omap_kp_dev.evbit);
+ omap_kp_dev = input_allocate_device();
+ set_bit(EV_KEY, omap_kp_dev->evbit);
for (i = 0; keymap[i] != 0; i++)
- set_bit(keymap[i] & 0x00ffffff, omap_kp_dev.keybit);
- omap_kp_dev.name = "omap-keypad";
- input_register_device(&omap_kp_dev);
+ set_bit(keymap[i] & 0x00ffffff, omap_kp_dev->keybit);
+ omap_kp_dev->name = "omap-keypad";
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
@@ -353,7 +353,7 @@ static void __exit omap_kp_exit(void)
del_timer_sync(&kp_timer);
/* unregister everything */
- input_unregister_device(&omap_kp_dev);
+ input_unregister_device(omap_kp_dev);
}
module_init(omap_kp_init);
[-- Attachment #3: Type: text/plain, Size: 184 bytes --]
_______________________________________________
Linux-omap-open-source mailing list
Linux-omap-open-source@linux.omap.com
http://linux.omap.com/mailman/listinfo/linux-omap-open-source
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Convert input devices to input_allocate_device
2005-11-22 19:46 Convert input devices to input_allocate_device Dirk Behme
@ 2005-11-22 21:49 ` Dirk Behme
2005-11-28 9:54 ` [PATCH] " Dirk Behme
1 sibling, 0 replies; 4+ messages in thread
From: Dirk Behme @ 2005-11-22 21:49 UTC (permalink / raw)
To: linux-omap-open-source
[-- Attachment #1: Type: text/plain, Size: 539 bytes --]
Dirk Behme wrote:
> # ts_calibrate
> ts_open: No such device
Missed an input_register_device(omap_kp_dev) in omap-keypad. TS became
event0 and so ts_calibrate can't open event1 ;) Corrected patch in the
attachment.
But with this I get
# ts_calibrate
xres = 240, yres = 320
Took 15 samples...
Top left : X = 2893 Y = 3122
kernel BUG at include/linux/timer.h:83!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 817 [#1]
Modules linked in:...
?
[-- Attachment #2: input_allocate_device_v2.patch --]
[-- Type: text/plain, Size: 5207 bytes --]
--- ./drivers/input/touchscreen/omap/omap_ts.c_orig 2005-11-22 20:14:23.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.c 2005-11-22 20:20:24.000000000 +0100
@@ -65,10 +65,10 @@ static int omap_ts_read(void)
ts_omap.dev->read(data);
- input_report_abs(&(ts_omap.inputdevice), ABS_X, data[0]);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, data[1]);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE, data[2]);
- input_sync(&(ts_omap.inputdevice));
+ input_report_abs(ts_omap.inputdevice, ABS_X, data[0]);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, data[1]);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE, data[2]);
+ input_sync(ts_omap.inputdevice);
DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1],
data[2]);
@@ -85,7 +85,7 @@ static void omap_ts_timer(unsigned long
if (!ts_omap.dev->penup()) {
if (!ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen down\n");
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 1);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 1);
}
ts_omap.touched = 1;
omap_ts_read();
@@ -95,12 +95,12 @@ static void omap_ts_timer(unsigned long
if (ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen up\n");
ts_omap.touched = 0;
- input_report_abs(&(ts_omap.inputdevice), ABS_X, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE,
+ input_report_abs(ts_omap.inputdevice, ABS_X, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE,
0);
- input_sync(&(ts_omap.inputdevice));
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 0);
+ input_sync(ts_omap.inputdevice);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 0);
}
if (!ts_omap.irq_enabled) {
ts_omap.irq_enabled = 1;
@@ -168,14 +168,14 @@ static int __init omap_ts_probe(struct d
return -EINVAL;
}
- init_input_dev(&(ts_omap.inputdevice));
- ts_omap.inputdevice.name = OMAP_TS_NAME;
- ts_omap.inputdevice.dev = dev;
- ts_omap.inputdevice.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- ts_omap.inputdevice.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts_omap.inputdevice.absbit[0] =
+ ts_omap.inputdevice = input_allocate_device();
+ ts_omap.inputdevice->name = OMAP_TS_NAME;
+ ts_omap.inputdevice->dev = dev;
+ ts_omap.inputdevice->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ ts_omap.inputdevice->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ ts_omap.inputdevice->absbit[0] =
BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- input_register_device(&(ts_omap.inputdevice));
+ input_register_device(ts_omap.inputdevice);
ts_omap.dev->enable();
@@ -187,7 +187,7 @@ static int __init omap_ts_probe(struct d
static int __exit omap_ts_remove(struct device *dev)
{
ts_omap.dev->disable();
- input_unregister_device(&ts_omap.inputdevice);
+ input_unregister_device(ts_omap.inputdevice);
if (ts_omap.irq != -1)
free_irq(ts_omap.irq, &ts_omap);
--- ./drivers/input/touchscreen/omap/omap_ts.h_orig 2005-11-22 19:47:37.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.h 2005-11-22 20:09:03.000000000 +0100
@@ -42,7 +42,7 @@ struct ts_device {
};
struct omap_ts_t{
- struct input_dev inputdevice;
+ struct input_dev * inputdevice;
struct timer_list ts_timer; // Timer for triggering acquisitions
int touched;
int irq;
--- ./drivers/input/keyboard/omap-keypad.c_orig 2005-11-22 20:17:15.000000000 +0100
+++ ./drivers/input/keyboard/omap-keypad.c 2005-11-22 21:58:06.575502064 +0100
@@ -44,7 +44,7 @@
static void omap_kp_tasklet(unsigned long);
static void omap_kp_timer(unsigned long);
-static struct input_dev omap_kp_dev;
+static struct input_dev * omap_kp_dev;
static unsigned char keypad_state[8];
static unsigned int keypad_irq = INT_KEYBOARD;
@@ -246,7 +246,7 @@ static void omap_kp_tasklet(unsigned lon
continue;
}
- input_report_key(&omap_kp_dev, key,
+ input_report_key(omap_kp_dev, key,
new_state[col] & (1 << row));
#endif
}
@@ -277,7 +277,7 @@ static int __init omap_kp_init(void)
if (machine_is_omap_h2() || machine_is_omap_h3()) {
keymap = h2_keymap;
- set_bit(EV_REP, omap_kp_dev.evbit);
+ set_bit(EV_REP, omap_kp_dev->evbit);
} else if (machine_is_omap_innovator()) {
keymap = innovator_keymap;
} else if (machine_is_omap_osk()) {
@@ -299,11 +299,12 @@ static int __init omap_kp_init(void)
return -EINVAL;
/* setup input device */
- set_bit(EV_KEY, omap_kp_dev.evbit);
+ omap_kp_dev = input_allocate_device();
+ set_bit(EV_KEY, omap_kp_dev->evbit);
for (i = 0; keymap[i] != 0; i++)
- set_bit(keymap[i] & 0x00ffffff, omap_kp_dev.keybit);
- omap_kp_dev.name = "omap-keypad";
- input_register_device(&omap_kp_dev);
+ set_bit(keymap[i] & 0x00ffffff, omap_kp_dev->keybit);
+ omap_kp_dev->name = "omap-keypad";
+ input_register_device(omap_kp_dev);
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
@@ -353,7 +354,7 @@ static void __exit omap_kp_exit(void)
del_timer_sync(&kp_timer);
/* unregister everything */
- input_unregister_device(&omap_kp_dev);
+ input_unregister_device(omap_kp_dev);
}
module_init(omap_kp_init);
[-- Attachment #3: Type: text/plain, Size: 184 bytes --]
_______________________________________________
Linux-omap-open-source mailing list
Linux-omap-open-source@linux.omap.com
http://linux.omap.com/mailman/listinfo/linux-omap-open-source
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH] Re: Convert input devices to input_allocate_device
2005-11-22 19:46 Convert input devices to input_allocate_device Dirk Behme
2005-11-22 21:49 ` Dirk Behme
@ 2005-11-28 9:54 ` Dirk Behme
2005-11-28 10:03 ` Komal Shah
1 sibling, 1 reply; 4+ messages in thread
From: Dirk Behme @ 2005-11-28 9:54 UTC (permalink / raw)
To: linux-omap-open-source
[-- Attachment #1: Type: text/plain, Size: 976 bytes --]
Dirk Behme wrote:
> while loading omapts and omap-keypad drivers as modules in
> 2.6.15-rc1-omap1 I get:
>
> input: device omap-keypad is statically allocated, will not register
> Please convert to input_allocate_device() or contact
> dtor_core@ameritech.net
>
> input: device omap_ts is statically allocated, will not register
> Please convert to input_allocate_device() or contact
> dtor_core@ameritech.net
ARM: OMAP: Convert input devices to input_allocate_device:
input: device omap-keypad is statically allocated, will not register
Please convert to input_allocate_device() or contact
dtor_core@ameritech.net
input: device omap_ts is statically allocated, will not register
Please convert to input_allocate_device() or contact
dtor_core@ameritech.net
ARM: OMAP: Check in omap_ts_handler() if timer is still running. Delete
it if neccessary. Else we will get Oops "kernel BUG at
include/linux/timer.h:83!"
Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
[-- Attachment #2: input_allocate_device_v3.patch --]
[-- Type: text/plain, Size: 5569 bytes --]
--- ./drivers/input/touchscreen/omap/omap_ts.c_orig 2005-11-22 22:18:23.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.c 2005-11-28 09:18:30.871818824 +0100
@@ -65,10 +65,10 @@ static int omap_ts_read(void)
ts_omap.dev->read(data);
- input_report_abs(&(ts_omap.inputdevice), ABS_X, data[0]);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, data[1]);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE, data[2]);
- input_sync(&(ts_omap.inputdevice));
+ input_report_abs(ts_omap.inputdevice, ABS_X, data[0]);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, data[1]);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE, data[2]);
+ input_sync(ts_omap.inputdevice);
DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1],
data[2]);
@@ -85,7 +85,7 @@ static void omap_ts_timer(unsigned long
if (!ts_omap.dev->penup()) {
if (!ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen down\n");
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 1);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 1);
}
ts_omap.touched = 1;
omap_ts_read();
@@ -95,12 +95,12 @@ static void omap_ts_timer(unsigned long
if (ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen up\n");
ts_omap.touched = 0;
- input_report_abs(&(ts_omap.inputdevice), ABS_X, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE,
+ input_report_abs(ts_omap.inputdevice, ABS_X, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE,
0);
- input_sync(&(ts_omap.inputdevice));
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 0);
+ input_sync(ts_omap.inputdevice);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 0);
}
if (!ts_omap.irq_enabled) {
ts_omap.irq_enabled = 1;
@@ -119,6 +119,9 @@ static irqreturn_t omap_ts_handler(int i
ts_omap.irq_enabled = 0;
disable_irq(irq);
}
+ // check for still pending timer, delete it if neccessary
+ if(timer_pending(&(ts_omap.ts_timer)))
+ del_timer(&(ts_omap.ts_timer));
// restart acquire
ts_omap.ts_timer.expires = jiffies + HZ / 100;
add_timer(&(ts_omap.ts_timer));
@@ -168,14 +171,14 @@ static int __init omap_ts_probe(struct d
return -EINVAL;
}
- init_input_dev(&(ts_omap.inputdevice));
- ts_omap.inputdevice.name = OMAP_TS_NAME;
- ts_omap.inputdevice.dev = dev;
- ts_omap.inputdevice.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- ts_omap.inputdevice.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts_omap.inputdevice.absbit[0] =
+ ts_omap.inputdevice = input_allocate_device();
+ ts_omap.inputdevice->name = OMAP_TS_NAME;
+ ts_omap.inputdevice->dev = dev;
+ ts_omap.inputdevice->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ ts_omap.inputdevice->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ ts_omap.inputdevice->absbit[0] =
BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- input_register_device(&(ts_omap.inputdevice));
+ input_register_device(ts_omap.inputdevice);
ts_omap.dev->enable();
@@ -187,7 +190,7 @@ static int __init omap_ts_probe(struct d
static int __exit omap_ts_remove(struct device *dev)
{
ts_omap.dev->disable();
- input_unregister_device(&ts_omap.inputdevice);
+ input_unregister_device(ts_omap.inputdevice);
if (ts_omap.irq != -1)
free_irq(ts_omap.irq, &ts_omap);
--- ./drivers/input/touchscreen/omap/omap_ts.h_orig 2005-11-22 22:18:24.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.h 2005-11-22 22:22:16.000000000 +0100
@@ -42,7 +42,7 @@ struct ts_device {
};
struct omap_ts_t{
- struct input_dev inputdevice;
+ struct input_dev * inputdevice;
struct timer_list ts_timer; // Timer for triggering acquisitions
int touched;
int irq;
--- ./drivers/input/keyboard/omap-keypad.c_orig 2005-11-22 22:18:22.000000000 +0100
+++ ./drivers/input/keyboard/omap-keypad.c 2005-11-22 22:22:16.000000000 +0100
@@ -44,7 +44,7 @@
static void omap_kp_tasklet(unsigned long);
static void omap_kp_timer(unsigned long);
-static struct input_dev omap_kp_dev;
+static struct input_dev * omap_kp_dev;
static unsigned char keypad_state[8];
static unsigned int keypad_irq = INT_KEYBOARD;
@@ -246,7 +246,7 @@ static void omap_kp_tasklet(unsigned lon
continue;
}
- input_report_key(&omap_kp_dev, key,
+ input_report_key(omap_kp_dev, key,
new_state[col] & (1 << row));
#endif
}
@@ -277,7 +277,7 @@ static int __init omap_kp_init(void)
if (machine_is_omap_h2() || machine_is_omap_h3()) {
keymap = h2_keymap;
- set_bit(EV_REP, omap_kp_dev.evbit);
+ set_bit(EV_REP, omap_kp_dev->evbit);
} else if (machine_is_omap_innovator()) {
keymap = innovator_keymap;
} else if (machine_is_omap_osk()) {
@@ -299,11 +299,12 @@ static int __init omap_kp_init(void)
return -EINVAL;
/* setup input device */
- set_bit(EV_KEY, omap_kp_dev.evbit);
+ omap_kp_dev = input_allocate_device();
+ set_bit(EV_KEY, omap_kp_dev->evbit);
for (i = 0; keymap[i] != 0; i++)
- set_bit(keymap[i] & 0x00ffffff, omap_kp_dev.keybit);
- omap_kp_dev.name = "omap-keypad";
- input_register_device(&omap_kp_dev);
+ set_bit(keymap[i] & 0x00ffffff, omap_kp_dev->keybit);
+ omap_kp_dev->name = "omap-keypad";
+ input_register_device(omap_kp_dev);
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
@@ -353,7 +354,7 @@ static void __exit omap_kp_exit(void)
del_timer_sync(&kp_timer);
/* unregister everything */
- input_unregister_device(&omap_kp_dev);
+ input_unregister_device(omap_kp_dev);
}
module_init(omap_kp_init);
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] Re: Convert input devices to input_allocate_device
2005-11-28 9:54 ` [PATCH] " Dirk Behme
@ 2005-11-28 10:03 ` Komal Shah
0 siblings, 0 replies; 4+ messages in thread
From: Komal Shah @ 2005-11-28 10:03 UTC (permalink / raw)
To: Dirk Behme, linux-omap-open-source
--- Dirk Behme <dirk.behme@de.bosch.com> wrote:
> ARM: OMAP: Convert input devices to input_allocate_device:
>
> input: device omap-keypad is statically allocated, will not register
> Please convert to input_allocate_device() or contact
> dtor_core@ameritech.net
>
> input: device omap_ts is statically allocated, will not register
> Please convert to input_allocate_device() or contact
> dtor_core@ameritech.net
>
> ARM: OMAP: Check in omap_ts_handler() if timer is still running.
> Delete
> it if neccessary. Else we will get Oops "kernel BUG at
> include/linux/timer.h:83!"
If Tony, applies my patch of keypad driver model first then your patch
will break.
---Komal Shah
http://komalshah.blogspot.com/
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-11-28 10:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-22 19:46 Convert input devices to input_allocate_device Dirk Behme
2005-11-22 21:49 ` Dirk Behme
2005-11-28 9:54 ` [PATCH] " Dirk Behme
2005-11-28 10:03 ` Komal Shah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox