From: Dirk Behme <dirk.behme@de.bosch.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH] Convert touchscreen to input_allocate_device
Date: Sun, 04 Dec 2005 16:52:34 +0100 [thread overview]
Message-ID: <439310C2.3080406@de.bosch.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 427 bytes --]
ARM: OMAP: Convert touchscreen to input_allocate_device() to remove:
input: device omap_ts is statically allocated, will not register
Please convert to input_allocate_device() or contact dtor_core@ameritech.net
ARM: OMAP: Check in omap_ts_handler() if timer is still running. Delete
it if necessary. Else we will get Oops "kernel BUG at
include/linux/timer.h:83!"
Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
[-- Attachment #2: touchscreen_input_allocate_device.patch --]
[-- Type: text/plain, Size: 3799 bytes --]
--- ./drivers/input/touchscreen/omap/omap_ts.c_orig 2005-12-02 17:41:07.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.c 2005-12-02 18:11:32.000000000 +0100
@@ -65,10 +65,10 @@ static int omap_ts_read(void)
ts_omap.dev->read(data);
- input_report_abs(&(ts_omap.inputdevice), ABS_X, data[0]);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, data[1]);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE, data[2]);
- input_sync(&(ts_omap.inputdevice));
+ input_report_abs(ts_omap.inputdevice, ABS_X, data[0]);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, data[1]);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE, data[2]);
+ input_sync(ts_omap.inputdevice);
DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1],
data[2]);
@@ -85,7 +85,7 @@ static void omap_ts_timer(unsigned long
if (!ts_omap.dev->penup()) {
if (!ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen down\n");
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 1);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 1);
}
ts_omap.touched = 1;
omap_ts_read();
@@ -95,12 +95,12 @@ static void omap_ts_timer(unsigned long
if (ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen up\n");
ts_omap.touched = 0;
- input_report_abs(&(ts_omap.inputdevice), ABS_X, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE,
+ input_report_abs(ts_omap.inputdevice, ABS_X, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE,
0);
- input_sync(&(ts_omap.inputdevice));
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 0);
+ input_sync(ts_omap.inputdevice);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 0);
}
if (!ts_omap.irq_enabled) {
ts_omap.irq_enabled = 1;
@@ -119,7 +119,10 @@ static irqreturn_t omap_ts_handler(int i
ts_omap.irq_enabled = 0;
disable_irq(irq);
}
- // restart acquire
+ // check for still pending timer, delete it if neccessary
+ if(timer_pending(&(ts_omap.ts_timer)))
+ del_timer(&(ts_omap.ts_timer));
+ // restart acquire
ts_omap.ts_timer.expires = jiffies + HZ / 100;
add_timer(&(ts_omap.ts_timer));
@@ -168,14 +171,14 @@ static int __init omap_ts_probe(struct p
return -EINVAL;
}
- init_input_dev(&(ts_omap.inputdevice));
- ts_omap.inputdevice.name = OMAP_TS_NAME;
- ts_omap.inputdevice.dev = &pdev->dev;
- ts_omap.inputdevice.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- ts_omap.inputdevice.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts_omap.inputdevice.absbit[0] =
+ ts_omap.inputdevice = input_allocate_device();
+ ts_omap.inputdevice->name = OMAP_TS_NAME;
+ ts_omap.inputdevice->dev = &pdev->dev;
+ ts_omap.inputdevice->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ ts_omap.inputdevice->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ ts_omap.inputdevice->absbit[0] =
BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- input_register_device(&(ts_omap.inputdevice));
+ input_register_device(ts_omap.inputdevice);
ts_omap.dev->enable();
@@ -187,7 +190,7 @@ static int __init omap_ts_probe(struct p
static int omap_ts_remove(struct platform_device *pdev)
{
ts_omap.dev->disable();
- input_unregister_device(&ts_omap.inputdevice);
+ input_unregister_device(ts_omap.inputdevice);
if (ts_omap.irq != -1)
free_irq(ts_omap.irq, &ts_omap);
--- ./drivers/input/touchscreen/omap/omap_ts.h_orig 2005-12-02 17:42:30.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.h 2005-12-02 17:43:05.000000000 +0100
@@ -42,7 +42,7 @@ struct ts_device {
};
struct omap_ts_t{
- struct input_dev inputdevice;
+ struct input_dev * inputdevice;
struct timer_list ts_timer; // Timer for triggering acquisitions
int touched;
int irq;
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next reply other threads:[~2005-12-04 15:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-04 15:52 Dirk Behme [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-12-27 9:51 Pending patches Dirk Behme
2005-12-30 22:28 ` Tony Lindgren
2006-01-03 19:13 ` Pending patches mostly pushed, please check Tony Lindgren
2006-01-06 19:37 ` [PATCH] Convert touchscreen to input_allocate_device Dirk Behme
2006-01-14 0:18 ` Tony Lindgren
2006-01-16 11:59 Mikko.Soikkala
2006-01-16 18:15 ` Dirk Behme
2006-01-17 13:24 Mikko.Soikkala
2006-01-17 15:12 ` Komal Shah
2006-01-18 9:34 Mikko.Soikkala
2006-01-18 10:10 ` Komal Shah
2006-01-18 11:21 ` Juha Yrjölä
2006-01-18 16:39 ` Komal Shah
2006-01-20 23:07 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=439310C2.3080406@de.bosch.com \
--to=dirk.behme@de.bosch.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox