From: Dirk Behme <dirk.behme@de.bosch.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap-open-source@linux.omap.com
Subject: [PATCH] Convert touchscreen to input_allocate_device
Date: Fri, 06 Jan 2006 20:37:16 +0100 [thread overview]
Message-ID: <43BEC6EC.6060204@de.bosch.com> (raw)
In-Reply-To: <20060103191356.GR6034@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 397 bytes --]
Tony Lindgren wrote:
> Dirk, I've only pushed Todd's timer fix below like you suggested. Can you please
> update your patch?
ARM: OMAP: Convert touchscreen to input_allocate_device() to remove:
input: device omap_ts is statically allocated, will not register
Please convert to input_allocate_device() or contact dtor_core@ameritech.net
Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
[-- Attachment #2: touchscreen_input_allocate_device.patch --]
[-- Type: text/plain, Size: 3403 bytes --]
--- ./drivers/input/touchscreen/omap/omap_ts.c_orig 2006-01-06 16:43:40.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.c 2006-01-06 18:48:39.754015208 +0100
@@ -65,10 +65,10 @@ static int omap_ts_read(void)
ts_omap.dev->read(data);
- input_report_abs(&(ts_omap.inputdevice), ABS_X, data[0]);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, data[1]);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE, data[2]);
- input_sync(&(ts_omap.inputdevice));
+ input_report_abs(ts_omap.inputdevice, ABS_X, data[0]);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, data[1]);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE, data[2]);
+ input_sync(ts_omap.inputdevice);
DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1],
data[2]);
@@ -85,7 +85,7 @@ static void omap_ts_timer(unsigned long
if (!ts_omap.dev->penup()) {
if (!ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen down\n");
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 1);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 1);
}
ts_omap.touched = 1;
omap_ts_read();
@@ -95,12 +95,12 @@ static void omap_ts_timer(unsigned long
if (ts_omap.touched) {
DEBUG_TS("omap_ts_timer: pen up\n");
ts_omap.touched = 0;
- input_report_abs(&(ts_omap.inputdevice), ABS_X, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_Y, 0);
- input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE,
+ input_report_abs(ts_omap.inputdevice, ABS_X, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_Y, 0);
+ input_report_abs(ts_omap.inputdevice, ABS_PRESSURE,
0);
- input_sync(&(ts_omap.inputdevice));
- input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 0);
+ input_sync(ts_omap.inputdevice);
+ input_report_key(ts_omap.inputdevice, BTN_TOUCH, 0);
}
if (!ts_omap.irq_enabled) {
ts_omap.irq_enabled = 1;
@@ -167,14 +167,14 @@ static int __init omap_ts_probe(struct p
return -EINVAL;
}
- init_input_dev(&(ts_omap.inputdevice));
- ts_omap.inputdevice.name = OMAP_TS_NAME;
- ts_omap.inputdevice.dev = &pdev->dev;
- ts_omap.inputdevice.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- ts_omap.inputdevice.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts_omap.inputdevice.absbit[0] =
+ ts_omap.inputdevice = input_allocate_device();
+ ts_omap.inputdevice->name = OMAP_TS_NAME;
+ ts_omap.inputdevice->dev = &pdev->dev;
+ ts_omap.inputdevice->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ ts_omap.inputdevice->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ ts_omap.inputdevice->absbit[0] =
BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- input_register_device(&(ts_omap.inputdevice));
+ input_register_device(ts_omap.inputdevice);
ts_omap.dev->enable();
@@ -186,7 +186,7 @@ static int __init omap_ts_probe(struct p
static int omap_ts_remove(struct platform_device *pdev)
{
ts_omap.dev->disable();
- input_unregister_device(&ts_omap.inputdevice);
+ input_unregister_device(ts_omap.inputdevice);
if (ts_omap.irq != -1)
free_irq(ts_omap.irq, &ts_omap);
--- ./drivers/input/touchscreen/omap/omap_ts.h_orig 2006-01-06 16:43:40.000000000 +0100
+++ ./drivers/input/touchscreen/omap/omap_ts.h 2006-01-06 18:48:39.756014904 +0100
@@ -42,7 +42,7 @@ struct ts_device {
};
struct omap_ts_t{
- struct input_dev inputdevice;
+ struct input_dev * inputdevice;
struct timer_list ts_timer; // Timer for triggering acquisitions
int touched;
int irq;
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2006-01-06 19:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-27 9:51 Pending patches Dirk Behme
2005-12-27 18:01 ` Anderson.Briglia
2005-12-28 15:53 ` Anderson Lizardo
2005-12-30 22:28 ` Tony Lindgren
2006-01-03 19:13 ` Pending patches mostly pushed, please check Tony Lindgren
2006-01-03 20:41 ` Ladislav Michl
2006-01-04 0:09 ` Tony Lindgren
2006-01-03 22:36 ` Todd Poynor
2006-01-04 0:27 ` Tony Lindgren
2006-01-04 0:25 ` Todd Poynor
2006-01-04 0:33 ` Tony Lindgren
2006-01-04 7:12 ` Komal Shah
2006-01-06 19:37 ` Dirk Behme [this message]
2006-01-14 0:18 ` [PATCH] Convert touchscreen to input_allocate_device Tony Lindgren
2006-01-06 19:37 ` [PATCH] Re: Pending patches mostly pushed, please check Dirk Behme
2006-01-14 0:20 ` Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2006-01-18 9:34 [PATCH] Convert touchscreen to input_allocate_device Mikko.Soikkala
2006-01-18 10:10 ` Komal Shah
2006-01-18 11:21 ` Juha Yrjölä
2006-01-18 16:39 ` Komal Shah
2006-01-20 23:07 ` Tony Lindgren
2006-01-17 13:24 Mikko.Soikkala
2006-01-17 15:12 ` Komal Shah
2006-01-16 11:59 Mikko.Soikkala
2006-01-16 18:15 ` Dirk Behme
2005-12-04 15:52 Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43BEC6EC.6060204@de.bosch.com \
--to=dirk.behme@de.bosch.com \
--cc=linux-omap-open-source@linux.omap.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox